| Tl BMP | Tl # | Tl type | Tl name | Z-Min | Cycle time | Holder (old) |
|---|---|---|---|---|---|---|
| 0:00:58 | ||||||
 |
1 | Drill | NO. 7 DRILL | -0.8 | 75:00:01 | |
 |
2 | Drill | NO. 22 DRILL | -0.8 | 0:00:54 | |
 |
3 | Tap RH | NO. 10-24 TAPRH | -0.45 | 0:00:05 | |
 |
4 | Drill | 1/2 DRILL | -0.75 | 0:00:10 | |
 |
5 | Endmill1 Flat | 3/8 FLAT ENDMILL | -0.7 | 0:00:58 | |
 |
6 | Endmill1 Flat | 1/4 FLAT ENDMILL | -0.19 | 0:00:29 | |
 |
7 | Engrave tool | 1/4 INCH 90 DEGREE ENGRAVE TOOL .06 TIP | -0.035 | 0:01:41 | |