-9999 Mastercam-to-IOF: Operation #1 (Lathe Face) -9998 Mastercam-to-IOF: Operation #2 (Lathe Rough) -9997 Mastercam-to-IOF: Operation #3 (Lathe Finish) -9996 Mastercam-to-IOF: Operation #4 (Lathe Drill) -9995 Mastercam-to-IOF: Operation #5 (Contour (2D)) -9994 Mastercam-to-IOF: Operation #6 (Pecking Cycle) -9993 Mastercam-to-IOF: Operation #7 (Lathe Cutoff) -1000 Reading Operation and Toolpaths from NCI database -9 Processing IOF machine motion data -1 General 1 Operation 1 (Lathe Face) 2 Operation 2 (Lathe Rough) 3 Operation 3 (Lathe Finish) 4 Operation 4 (Lathe Drill) 5 Operation 5 (Contour (2D)) 6 Operation 6 (Pecking Cycle) 7 Operation 7 (Lathe Cutoff) 2000 Validating work offset information 2040 Processing Reference Position Data. -1 7 operations chosen for BNCI-to-IOF conversion. Info 0 -1 7 operations chosen for BNCI-to-IOF conversion. Info 0 -9 Processing document... Info 0 -9 Preprocessing stream 0... Info 0 1 Operation 1 (Lathe Face) Info 0 1 Classifying Operation Type. Info 1 1 Invoke Turning Pre-Processor. Info 1 2 Operation 2 (Lathe Rough) Info 0 2 Classifying Operation Type. Info 1 2 Invoke Turning Pre-Processor. Info 1 3 Operation 3 (Lathe Finish) Info 0 3 Classifying Operation Type. Info 1 3 Invoke Turning Pre-Processor. Info 1 4 Operation 4 (Lathe Drill) Info 0 4 Classifying Operation Type. Info 1 4 Invoke Turning Pre-Processor. Info 1 5 Operation 5 (Contour (2D)) Info 0 5 Classifying Operation Type. Info 1 5 Invoke face polar (G12) Mill Pre-Processor. Info 1 5 Invoke long hand polar Mill Pre-Processor. Info 1 6 Operation 6 (Pecking Cycle) Info 0 6 Classifying Operation Type. Info 1 6 Invoke G68 Mill Pre-Processor. Info 1 6 Invoke Basic Mill Pre-Processor. Info 1 7 Operation 7 (Lathe Cutoff) Info 0 7 Classifying Operation Type. Info 1 7 IGMP2014 Failed to get the first sub-operation. The NCI section for a segment of the operation is probably bad. Try regenerating the toolpath for this operation. Error 1 7 IGMP2024 Processing failed while setting the tool orientation angle for a portion of this operation. This indicates a serious problem with your part file. Error 1 7 IGMP2013 Failure while processing an operation or toolpath. Select the notes and labels to align. Error 0 7 IGMP2011 Preprocessing operation #7 - "Lathe Cutoff". Error 0 7 IGMP2019 Error(s) occurred during stream #0. Error 0