| Tl BMP | Tl # | Tl type | Tl name | Z-Min | Cycle time | Holder (old) |
|---|---|---|---|---|---|---|
| 0:00:13 | ||||||
 |
1 | Drill | 1/8 DRILL | -0.5 | 0:00:15 | |
 |
1 | Drill | NO. 25 DRILL | -1.1 | 0:00:20 | |
 |
2 | Endmill1 Flat | 9/32 FLAT ENDMILL | -0.89 | 0:00:13 | |
 |
2 | Tap RH | NO. 6-32 TAPRH ROLLFORM | -0.38 | 0:00:09 | |
 |
3 | Endmill1 Flat | 1/4 FLAT ENDMILL | -1.01 | 0:02:43 | |
 |
4 | Endmill1 Flat | 1/4 FLAT ENDMILL | -1.0 | 0:01:08 | |
 |
5 | Roundover | 1/8 CARB CORNER E.M. | -0.875 | 0:01:16 | |