| Datum | 20.05.2016 - 13:20:31 |
| MC-Dateiname | T12.mcx-9 |
| Voller MC-Dateiname | C:\Users\Public\Documents\schulung\T12\T12.mcx-9 |
| Maschine | C30_V9.mmd-9 |
| Material | ALUMINUM inch - 2024 |
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:00:15 | |||||||
 |
1 | Drill | 13/16 DRILL | 0.8125 | 3.0 | 2.0 | -1.6 |
 |
2 | Tap RH | 7/8-14 TAPRH | 0.875 | 5.375 | 2.75 | -1.4 |
 |
3 | Drill | 47/64 DRILL | 0.7344 | 3.0 | 2.0 | -1.4 |
 |
4 | Endmill1 Flat | 1/2 FLAT ENDMILL | 0.5 | 3.0 | 1.0 | -1.28 |
 |
5 | Taper mill | 1/4 X 20 DEG ENDMILL | 0.08 | 2.0 | 0.26 | -0.05 |
 |
6 | Drill | NO. 30 DRILL | 0.1285 | 3.0 | 2.0 | -0.51 |
 |
7 | Tap RH | 4.00-0.7 TAP RH | 0.157 | 75.0 | 50.0 | -0.4 |
 |
8 | Drill | 1/8 DRILL | 0.125 | 3.0 | 2.0 | -0.5 |
 |
9 | Tap RH | NO. 6-32 TAPRH | 0.138 | 0.789 | 0.375 | -0.32 |