| Datum | 06.07.2015 - 08:47:18 |
| MC-Dateiname | T |
| Voller MC-Dateiname | T |
| Maschine | TNC530i_new.mmd-9 |
| Material | ALUMINUM inch - 2024 |
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 1:36:44 | |||||||
 |
1 | Endmill1 Flat | 1/2 FLAT ENDMILL | 0.5 | 3.0 | 1.0 | -2.1 |
 |
4 | Endmill2 Sphere | 3/8 BALL ENDMILL | 0.375 | 2.5 | 0.75 | -0.547 |
 |
9 | Endmill1 Flat | 3/4 FLAT ENDMILL | 0.75 | 3.5 | 2.5 | -2.5 |
 |
13 | Drill | NO. 7 DRILL | 0.201 | 3.0 | 2.0 | 0.2875 |
 |
14 | Tap RH | 1/4-20 TAPRH | 0.25 | 1.5 | 0.75 | 0.4375 |
 |
28 | Facing | 3.00 COROMILL FACEMILL | 3.0 | 1.0 | 0.25 | 0.0 |