| Programmer | Alf |
| Date | 10/5/2022 - 10:29:37 AM |
| MC-Filename | P-221729-22_FlowCell.mcam |
| File description | Original Import File name = X:\901805_Coastal_Biogeochemical_Sensing\picopH_pyroScience\1000m Case\P-221729-22_FlowCell.SLDPRT |
| Machine | DMG Mori Seiki NLX2500MC 700TSY_12st BOT.mcam-lmd |
| Postprocessor | MTMachine Group uses Extensions |
| Stock | OD=1.250 ID=0.000 L=3.925 Z=9.499 |
MyComment
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:12:07 | |||||||
 |
2 | General turning tool | OD FINISH RIGHT - 35 DEG. | 0.0313 | -1.9238 | ||
 |
4 | Grooving tool | OD GROOVE .094 W | 0.01 | -1.2839 | ||
 |
5 | Flat endmill | 3/8 FLAT ENDMILL | 0.375 | 2.5 | 0.75 | -1.7475 |
 |
6 | Drilling tool | DRILL .5 DIA. | 0.5 | -1.74 | ||
 |
7 | Flat endmill | 1/8 FLAT ENDMILL | 0.125 | 2.25 | 0.375 | -0.56 |
 |
9 | Drill | NO. 36 DRILL | 0.1065 | 3.0 | 2.0 | 0.35 |
 |
10 | Flat endmill | Copy of 3/8 FLAT ENDMILL | 0.375 | 2.5 | 0.75 | 0.578 |
 |
11 | Drill | LTR. Q DRILL | 0.332 | 3.0 | 2.0 | 0.1 |