| Programmer | Alf |
| Date | 2/1/2023 - 1:17:46 PM |
| MC-Filename | UnderwayBracket2.mcam |
| File description | Original Import File name = X:\machine shop transfer\Erich Rienecker\200103\UnderwayBracket2.SLDPRT |
| Machine | GENERIC HAAS 4X MILL2.mcam-mmd |
| Postprocessor | GENERIC HAAS 4X MILL.PST |
| Stock | X0.000 Y0.000 Z0.000 |
MyComment
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:02:46 | |||||||
 |
1 | Flat endmill | 1/2 FLAT ENDMILL | 0.5 | 3.0 | 1.0 | -0.85 |
 |
2 | Drill | NO. 4 DRILL | 0.209 | 3.0 | 2.0 | -1.0 |
 |
3 | Right-hand tap | 1/4-20 TAPRH | 0.25 | 3.0 | 2.0 | -0.75 |
 |
4 | Drill | 1/4 DRILL | 0.25 | 3.0 | 2.0 | -0.65 |
 |
5 | Flat endmill | 3/8 FLAT ENDMILL | 0.375 | 2.5 | 0.75 | -0.25 |
 |
9 | Facing | 3" Face Mill | 2.9 | 2.1 | 1.969 | -0.001 |