| Datum | 20.05.2016 - 13:20:31 |
| MC-Dateiname | T12.mcx-9 |
| Voller MC-Dateiname | C:\Users\Public\Documents\schulung\T12\T12.mcx-9 |
| Maschine | C30_V9.mmd-9 |
| Material | ALUMINUM inch - 2024 |
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:00:06 | |||||||
 |
1 | Drill | NO. 32 DRILL | 0.116 | 3.0 | 2.0 | -0.36 |
 |
2 | Tap RH | NO. 6-40 TAPRH | 0.138 | 0.789 | 0.375 | -0.26 |
 |
3 | Drill | NO. 24 CARBIDE DRILL | 0.152 | 3.0 | 2.0 | -0.8 |
 |
4 | Tap RH | NO. 10-24 TAP RH Ti | 0.19 | 1.195 | 0.625 | -0.38 |
 |
5 | Drill | NO. 7 DRILL | 0.201 | 3.0 | 2.0 | -0.8 |
 |
6 | Endmill1 Flat | 1/4 FLAT ENDMILL | 0.25 | 2.5 | 0.5 | -0.19 |
 |
8 | Chamfer mill | 1/2 CARB CHAMFERMILL | 0.5 | 2.0 | 1.0 | -0.061 |