| Programmer | Alf |
| Date | 10/27/2021 - 8:26:40 AM |
| MC-Filename | 2022Test.mcam |
| File description | |
| Machine | DMG_CMX_FANUC_4AXIS.mcam-mmd |
| Postprocessor | DMG_CMX_FANUC_4AXIS.psT |
| Stock | X0.000 Y0.000 Z0.000 |
Comment
MyComment
| Programmer | Alf |
| Date | 10/27/2021 - 8:26:40 AM |
| MC-Filename | 2022Test.mcam |
| File description | |
| Machine | DMG_CMX_FANUC_4AXIS.mcam-mmd |
| Postprocessor | DMG_CMX_FANUC_4AXIS.psT |
| Stock | X0.000 Y0.000 Z0.000 |
MyComment
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:01:35 | |||||||
 |
1 | Drill | 3/16 DRILL | 0.1875 | 3.0 | 2.0 | -0.25 |
 |
2 | Ball endmill | 1/4 BALL ENDMILL | 0.25 | 2.5 | 0.5 | -0.25 |