| Datum | 20.05.2016 - 13:20:31 |
| MC-Dateiname | T12.mcx-9 |
| Voller MC-Dateiname | C:\Users\Public\Documents\schulung\T12\T12.mcx-9 |
| Maschine | C30_V9.mmd-9 |
| Material | STEEL inch - 1030 - 200 BHN |
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:00:33 | |||||||
 |
1 | General Turning Tool | OD ROUGH RIGHT - 80 DEG. | 0.0313 | -1.0196 | ||
 |
2 | Drilling Tool | DRILL .453 DIA. | 0.453 | -0.98 | ||
 |
3 | Boring Bar | ID ROUGH MIN. .25 DIA. - 75 DEG. | 0.0156 | -0.9033 | ||
 |
5 | Grooving Tool | OD GROOVE RIGHT - .094 WIDE | 0.004 | -1.0 | ||
 |
7 | Grooving Tool | FACE GROOVE RIGHT - NARROW | 0.004 | -1.0514 | ||
 |
10 | Threading Tool | OD THREAD RIGHT | 0.0289 | 0.2119 | ||