| Programmer | Ray |
| Date | 9/20/2023 - 9:22:38 AM |
| MC-Filename | BackPlateRevA-1stOpp.mcam |
| File description | Original Import File name = X:\machine shop transfer\902204_CoMPAS\MolaDeepHousing\BackPlateRevA.SLDPRT |
| Machine | DMG_DMU_TNC.mcam-mmd |
| Postprocessor | DMG_DMU_TNC.psT |
| Stock | X8.250 Y4.250 Z0.750 |
MyComment
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:13:16 | |||||||
 |
5 | Flat endmill | 3/4 FLAT ENDMILL | 0.75 | 3.75 | 2.0 | -0.87 |
 |
13 | Roundover | 1/16 CARB CORNER ROUNDER | 0.064 | 2.0 | 0.75 | -0.062 |
 |
14 | Drill | NO. 16 DRILL | 0.177 | 3.0 | 2.0 | -0.85 |
 |
15 | Flat endmill | 5/16 FLAT ENDMILL | 0.3125 | 2.5 | 0.75 | -0.19 |
 |
16 | Countersink | 1.00 X 90 DEG. C,SINK | 1.0 | 2.0 | 1.0 | -0.16 |
 |
28 | Facing | 3.00 COROMILL FACEMILL | 2.9 | 2.0 | 0.25 | -0.01 |