| Programmer | Ray |
| Date | 11/10/2023 - 8:44:19 AM |
| MC-Filename | BondingFixture3Base-1stOpp-5axis.mcam |
| File description | Merged File name = R:\RAYT\FIXTURES\DMU50 FIXTURES\V562M 4 INCH VISE ON VP56M RISER.mcam Original Import File name = X:\machine shop transfer\GeneM\pH2023\BondingFixture3Base.SLDPRT |
| Machine | DMG_DMU_TNC.mcam-mmd |
| Postprocessor | DMG_DMU_TNC.psT |
| Stock | X6.750 Y0.500 Z2.000 |
MyComment
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 1:10:31 | |||||||
 |
13 | Drill | 3/32 DRILL | 0.0938 | 2.0 | 1.0 | -0.3 |
 |
14 | Drill | NO. 10 DRILL | 0.1935 | 3.0 | 2.0 | -0.325 |
 |
15 | Drill | 1/16 DRILL | 0.0625 | 2.0 | 1.0 | -0.285 |
 |
16 | Flat endmill | 3/16 FLAT ENDMILL | 0.1875 | 2.375 | 0.4375 | -0.24 |
 |
17 | Flat endmill | 5/64 FLAT ENDMILL | 0.078 | 2.25 | 0.375 | -0.04 |
 |
18 | Flat endmill | 1/8 FLAT ENDMILL | 0.125 | 2.25 | 0.375 | 0.01 |
 |
28 | Facing | 3.00 COROMILL FACEMILL | 2.95 | 2.0 | 0.25 | 0.225 |