| Datum | 20.05.2016 - 13:20:31 |
| MC-Dateiname | T12.mcx-9 |
| Voller MC-Dateiname | C:\Users\Public\Documents\schulung\T12\T12.mcx-9 |
| Maschine | C30_V9.mmd-9 |
| Material | ALUMINUM inch - 2024 |
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:00:17 | |||||||
 |
1 | Endmill1 Flat | 1/2 FLAT ENDMILL | 0.5 | 2.0 | 1.0 | -1.02 |
 |
11 | Drill | NO. 16 DRILL | 0.177 | 2.5 | 2.0 | -1.15 |
 |
12 | Drill | NO. 36 DRILL | 0.1065 | 2.5 | 2.0 | 0.0 |
 |
13 | Tap RH | NO. 6-32 TAPRH | 0.138 | 0.789 | 0.375 | 0.075 |
 |
14 | Drill | 41/64 DRILL | 0.6406 | 3.0 | 2.0 | -0.45 |
 |
15 | Endmill1 Flat | 1/4 FLAT ENDMILL | 0.25 | 2.0 | 0.5 | 0.282 |
 |
16 | Drill | NO. 3 DRILL | 0.213 | 2.5 | 2.0 | -0.5 |
 |
17 | Drill | NO. 52 DRILL | 0.0635 | 2.0 | 1.0 | -0.5 |
 |
18 | Tap RH | 1/4-28 TAPRH | 0.25 | 2.5 | 2.0 | 0.5233 |