| Programmer | Alf |
| Date | 3/9/2022 - 10:37:59 AM |
| MC-Filename | Flange Mount, Double Bearing, Rev_4-1stOpp.mcam |
| File description | Original Import File name = X:\machine shop transfer\Jordan\Tailcone Actuator Revision\Flange Mount, Double Bearing, Rev_4.SLDPRT |
| Machine | DMG Mori Seiki NLX2500MC 700TSY_12st BOT.mcam-lmd |
| Postprocessor | MTMachine Group uses Extensions |
| Stock | OD=2.125 ID=0.000 L=2.203 Z=8.778 |
MyComment
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:10:09 | |||||||
 |
1 | Flat endmill | 1/4 FLAT ENDMILL | 0.25 | 2.5 | 0.5 | 0.262 |
 |
2 | General turning tool | OD FINISH RIGHT - 35 DEG. | 0.0313 | -1.2431 | ||
 |
4 | Drilling tool | DRILL .5 DIA. | 0.5 | -1.2 | ||
 |
7 | Drill | NO. 54 DRILL | 0.055 | 2.0 | 1.0 | -0.2 |
 |
8 | Right-hand tap | NO. 0-80 TAPRH ROLLFORM | 0.06 | 3.0 | 2.0 | -0.13 |
 |
9 | Drill | 1/8 DRILL | 0.125 | 3.0 | 2.0 | -1.2 |
 |
10 | Drill | NO. 39 DRILL | 0.0995 | 2.0 | 1.0 | -1.28 |
 |
11 | Right-hand tap | NO. 4-40 TAPRH | 0.112 | 3.0 | 2.0 | -1.19 |
 |
12 | Boring bar | ID ROUGH MIN. .375 DIA. - 75 DEG. | 0.0313 | -0.0694 | ||