| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:09:24 | |||||||
 |
1 | Drill | 3/4 DRILL | 0.75 | 3.0 | 2.0 | -2.5 |
 |
2 | Drill | 1/8 DRILL | 0.125 | 3.0 | 2.0 | -0.52 |
 |
3 | Right-hand tap | NO. 6-32 ROLLTAP RH | 0.138 | 3.0 | 2.0 | -0.4 |
 |
4 | Drill | NO. 46 DRILL | 0.081 | 2.0 | 1.0 | -0.051 |
 |
5 | Flat endmill | 0.078 Flat Endmill | 0.078 | 1.0 | 0.1 | -0.052 |
 |
6 | Flat endmill | 3/4 FLAT ENDMILL | 0.75 | 3.75 | 2.0 | -2.5 |
 |
7 | Flat endmill | 1/2 FLAT ENDMILL | 0.5 | 3.0 | 1.0 | -2.5 |