| Programmer | Ray |
| Date | 10/2/2023 - 2:58:35 PM |
| MC-Filename | MolaDeepHousingRevA-2ndOpp.mcam |
| File description | Merged File name = R:\RAYT\FIXTURES\DMU50 FIXTURES\V562M 4 INCH VISE ON VP56M RISER.mcam Original Import File name = X:\machine shop transfer\902204_CoMPAS\MolaDeepHousing\MolaDeepHousingRevA.SLDPRT |
| Machine | DMG_DMU_TNC.mcam-mmd |
| Postprocessor | DMG_DMU_TNC.psT |
| Stock | X8.250 Y4.240 Z2.075 |
MyComment
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 2:16:30 | |||||||
 |
7 | Flat endmill | 1/4 FLAT ENDMILL | 0.25 | 2.5 | 0.5 | -0.8 |
 |
13 | Roundover | 0.93 Corner Rounder Tool | 0.06 | 2.0 | 0.093 | -0.093 |
 |
14 | Drill | NO. 29 DRILL | 0.136 | 3.0 | 2.0 | -0.45 |
 |
15 | Right-hand tap | NO. 8-32 TAPRH | 0.164 | 3.0 | 2.0 | -0.37 |
 |
18 | Flat endmill | 1/8 FLAT ENDMILL | 0.125 | 2.25 | 0.375 | -0.78 |
 |
19 | Ball endmill | 3/16 BALL ENDMILL | 0.1875 | 2.375 | 0.4375 | -0.5232 |
 |
20 | Ball endmill | 3/32 BALL ENDMILL | 0.093 | 2.25 | 0.375 | -0.4861 |
 |
28 | Facing | 3.00 COROMILL FACEMILL | 3.0 | 2.0 | 0.25 | -0.001 |