| Programmer | Ray |
| Date | 4/14/2023 - 2:04:31 PM |
| MC-Filename | P-100221840-23 Dock_cam_rear EC-2ndOpp.mcam |
| File description | Original Import File name = C:\Users\rayt\Desktop\P-100221840-23 Dock_cam_rear EC.SLDPRT |
| Machine | DMG Mori Seiki NLX2500MC 700TSY_12st BOT.mcam-lmd |
| Postprocessor | MTMachine Group uses Extensions |
| Stock | OD=3.530 ID=0.000 L=1.700 Z=7.475 |
MyComment
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:04:12 | |||||||
 |
1 | Right-hand tap | NO. 4-40 TAPRH | 0.112 | 3.0 | 2.0 | -0.3 |
 |
2 | General turning tool | OD FINISH RIGHT - 35 DEG. | 0.0313 | -0.25 | ||
 |
5 | Drill | 25/64 DRILL | 0.3906 | 3.0 | 2.0 | -0.65 |
 |
6 | Counterbore | 0.393 SAE 4 PORT TOOL | 0.393 | 4.5 | 0.62 | -0.626 |
 |
9 | Right-hand tap | 7/16-20 TAPRH | 0.4375 | 3.0 | 2.0 | -0.45 |
 |
10 | Drill | NO. 30 DRILL | 0.1285 | 3.0 | 2.0 | -0.3 |
 |
11 | Flat endmill | 7/32 FLAT ENDMILL | 0.218 | 2.375 | 0.4375 | -0.11 |
 |
12 | Drill | NO. 43 DRILL | 0.089 | 2.0 | 1.0 | -0.3 |