| Tl BMP | Tl # | Tl type | Tl name | Z-Min | Cycle time | Holder (old) |
|---|---|---|---|---|---|---|
| 0:01:36 | ||||||
 |
1 | Center Drill | 1/2 SPOT DRILL | -0.1 | 0:00:04 | |
 |
2 | Drill | 25/64 DRILL | -5.0 | 0:01:01 | |
 |
3 | Drill | 37/64 DRILL | -5.1 | 0:00:31 | |
 |
4 | Drill | 5/16 DRILL | -1.25 | 0:00:32 | |
 |
5 | Tap RH | 3/8-16 TAPRH | -0.8 | 0:00:07 | |
 |
6 | Drill | NO. 38 DRILL | -0.38 | 0:00:33 | |
 |
7 | Tap RH | NO. 4-40 TAPRH ROLLFORM | -0.28 | 0:00:19 | |
 |
8 | Endmill1 Flat | 5/16 FLAT ENDMILL | -1.0 | 0:01:36 | |
 |
9 | Chamfer mill | 1/2 CARB CHAMFERMILL | -0.08 | 0:00:39 | |