| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:00:00 | |||||||
 |
1 | General turning tool | OD ROUGH RIGHT - 80 DEG. | 0.0313 | -0.5871 | ||
 |
2 | Grooving tool | OD GROOVE RIGHT - .047 WIDE | 0.02 | -0.3115 | ||
 |
5 | Threading tool | OD THREAD RIGHT | 0.0289 | 0.2124 | ||
 |
7 | Drilling tool | DRILL .5 DIA. | 0.5 | -0.6 | ||
 |
9 | Boring bar | ID ROUGH MIN. .375 DIA. - 75 DEG. | 0.0313 | -0.4215 | ||
 |
11 | Grooving tool | Horn Face Groove Tool | 0.006 | -0.074 | ||