| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:05:47 | |||||||
 |
11 | Drill | 3/32 DRILL | 0.0938 | 2.0 | 1.0 | -0.4 |
 |
12 | Flat endmill | 3/16 FLAT ENDMILL FOR PLASTIC | 0.1875 | 2.375 | 0.4375 | -0.365 |
 |
13 | Drill | 1/16 DRILL | 0.0625 | 2.0 | 1.0 | -0.1179 |
 |
14 | Right-hand tap | M2 X .4 TAPRH | 0.082 | 3.0 | 2.0 | -0.1179 |
 |
15 | Drill | NO. 40 DRILL | 0.098 | 2.0 | 1.0 | -0.4919 |
 |
16 | Right-hand tap | THREAD TAP - M3 x 0.5 | 0.1181 | 2.2047 | 0.2362 | -0.4919 |