| Programmer | Alf |
| Date | 11/30/2022 - 9:10:15 AM |
| MC-Filename | P-221754-22_OpticHsg_ FrntEndCap_V3-2ndOpp.mcam |
| File description | Original Import File name = X:\902004_Planktivore\Housing_2022\OpticsPod\P-221754-22_OpticHsg_ FrntEndCap_V3.SLDPRT |
| Machine | DMG Mori Seiki NLX2500MC 700TSY_12st BOT.mcam-lmd |
| Postprocessor | MTMachine Group uses Extensions |
| Stock | OD=2.250 ID=0.000 L=0.858 Z=7.430 |
MyComment
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:06:43 | |||||||
 |
1 | Drill | NO. 36 DRILL | 0.1065 | 3.0 | 2.0 | -0.665 |
 |
2 | General turning tool | OD FINISH RIGHT - 35 DEG. | 0.0313 | -0.57 | ||
 |
3 | Threading tool | OD THREAD RIGHT | 0.0289 | 0.2124 | ||
 |
4 | Grooving tool | Lathe Tool .062 GRV | 0.01 | -0.195 | ||
 |
5 | Drilling tool | END MILL 1. DIA. - .015R | 1.0 | -0.43 | ||
 |
8 | Boring bar | ID ROUGH MIN. .375 DIA. - 75 DEG. | 0.0313 | -0.435 | ||
 |
12 | Right-hand tap | NO. 6-32 TAPRH | 0.138 | 3.0 | 2.0 | -0.6 |