| Programmer | Alf |
| Date | 9/30/2020 - 7:02:28 AM |
| Prog name | Side_Bar.NC |
| MC-Filename | Side_Bar.mcam |
| Machine | GENERIC HAAS 4X MILL2.mcam-mmd |
| Postprocessor | GENERIC HAAS 4X MILL.PST |
| Stock | R: 0.000 x 0.000 x 0.000 |
Comment
MyComment
| Programmer | Alf |
| Date | 9/30/2020 - 7:02:28 AM |
| Prog name | Side_Bar.NC |
| MC-Filename | Side_Bar.mcam |
| Machine | GENERIC HAAS 4X MILL2.mcam-mmd |
| Postprocessor | GENERIC HAAS 4X MILL.PST |
| Stock | R: 0.000 x 0.000 x 0.000 |
MyComment
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:00:51 | |||||||
 |
1 | Drill | NO. 9 DRILL | 0.196 | 3.0 | 2.0 | -0.85 |
 |
2 | Flat endmill | 1/4 FLAT ENDMILL | 0.25 | 2.5 | 0.5 | -0.25 |