| Programmer | Alf |
| Date | 3/9/2023 - 12:20:42 PM |
| MC-Filename | Top End Cap belophragm-2ndOpp.mcam |
| File description | Original Import File name = C:\Users\rayt\Documents\Downloads\Top End Cap belophragm.SLDPRT |
| Machine | DMG Mori Seiki NLX2500MC 700TSY_12st BOT.mcam-lmd |
| Postprocessor | MTMachine Group uses Extensions |
| Stock | OD=4.550 ID=0.000 L=3.890 Z=8.965 |
MyComment
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:32:38 | |||||||
 |
2 | General turning tool | OD FINISH RIGHT - 35 DEG. | 0.0313 | -1.5 | ||
 |
5 | Right-hand tap | NO. 8-32 TAPRH | 0.164 | 3.0 | 2.0 | -0.4 |
 |
6 | Drilling tool | DRILL 1.25 DIA. | 1.25 | -2.0 | ||
 |
7 | Drill | NO. 28 DRILL JOBBER | 0.1405 | 3.0 | 2.0 | -1.75 |
 |
8 | Boring bar | ID ROUGH MIN. .75 DIA. - 75 DEG. | 0.0625 | -1.5 | ||
 |
9 | Drill | LTR. C DRILL JOBBER | 0.242 | 3.0 | 2.0 | -2.35 |
 |
10 | Drill | NO. 29 DRILL | 0.136 | 3.0 | 2.0 | -0.5 |
 |
11 | Flat endmill | 1/2 FLAT ENDMILL | 0.5 | 3.0 | 1.0 | -1.5 |