| Datum | 06.07.2015 - 08:47:18 |
| MC-Dateiname | T |
| Voller MC-Dateiname | T |
| Maschine | TNC530i_new.mmd-9 |
| Material | ALUMINUM inch - 2024 |
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:00:14 | |||||||
 |
1 | Endmill1 Flat | 1/2 FLAT ENDMILL | 0.5 | 3.0 | 1.0 | -0.765 |
 |
11 | Drill | 5/8 DRILL | 0.625 | 3.0 | 2.0 | -0.95 |
 |
12 | Drill | 9/64 DRILL | 0.1406 | 3.0 | 2.0 | -0.25 |
 |
13 | Drill | NO. 36 DRILL | 0.1065 | 3.0 | 2.0 | -0.487 |
 |
14 | Tap RH | NO. 6-32 TAPRH | 0.138 | 3.0 | 2.0 | -0.43 |
 |
15 | Drill | 3/32 DRILL | 0.0938 | 2.0 | 1.0 | -0.83 |
 |
16 | Endmill1 Flat | 3/16 FLAT ENDMILL | 0.1875 | 2.375 | 0.4375 | -0.26 |
 |
17 | Tap RH | 1/4-28 TAPRH | 0.25 | 3.0 | 2.0 | -0.22 |