| Programmer | Ray |
| Date | 3/22/2023 - 8:57:37 AM |
| MC-Filename | TopCap_WW-1stOpp.mcam |
| File description | Original Import File name = X:\machine shop transfer\bjones\mFET WW 2021\SW\TopCap_WW.SLDPRT |
| Machine | DMG Mori Seiki NLX2500MC 700TSY_12st BOT.mcam-lmd |
| Postprocessor | MTMachine Group uses Extensions |
| Stock | OD=3.060 ID=0.000 L=3.579 Z=8.154 |
MyComment
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:07:28 | |||||||
 |
1 | Right-hand tap | NO. 10-32 TAPRH | 0.19 | 3.0 | 2.0 | -0.46 |
 |
2 | General turning tool | OD FINISH RIGHT - 35 DEG. | 0.0313 | -0.35 | ||
 |
5 | Drill | NO. 30 DRILL | 0.1285 | 3.0 | 2.0 | -0.4 |
 |
6 | Drilling tool | DRILL .5 DIA. | 0.5 | -0.8 | ||
 |
8 | Drilling tool | SAE 6 TOOL | 0.98 | -0.69 | ||
 |
9 | Flat endmill | 7/32 FLAT ENDMILL | 0.218 | 2.375 | 0.4375 | -0.112 |
 |
10 | Drill | NO. 43 DRILL | 0.089 | 2.0 | 1.0 | -0.45 |
 |
11 | Right-hand tap | NO. 4-40 TAPRH | 0.112 | 3.0 | 2.0 | -0.37 |
 |
12 | Drill | NO. 20 DRILL | 0.161 | 3.0 | 2.0 | -0.55 |