| Programmer | Alf |
| Date | 2/7/2023 - 1:21:06 PM |
| MC-Filename | Ventana_couplingSwingArm.mcam |
| File description | Original Import File name = X:\machine shop transfer\Aaron Schnittger\Coupling Assembly\Ventana_couplingSwingArm.SLDPRT |
| Machine | DMG Mori Seiki NLX2500MC 700TSY_12st BOT.mcam-lmd |
| Postprocessor | MTMachine Group uses Extensions |
| Stock | OD=2.125 ID=0.000 L=5.550 Z=10.625 |
MyComment
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 2:27:34 | |||||||
 |
1 | Flat endmill | 1/4 FLAT ENDMILL | 0.25 | 2.5 | 0.625 | 0.469 |
 |
2 | General turning tool | OD 55 deg Right | 0.0625 | -0.0592 | ||
 |
6 | Drilling tool | END MILL .75 DIA. - .015R | 0.75 | -1.385 | ||
 |
8 | Boring bar | ID FINISH MIN. .375 DIA. - 55 DEG. | 0.0313 | -1.39 | ||
 |
9 | Flat endmill | 1/2 FLAT ENDMILL | 0.5 | 3.0 | 1.125 | -0.031 |
 |
11 | Drill | 17/64 DRILL | 0.2656 | 3.0 | 2.0 | -1.0 |