| Tl BMP | Tl # | Tl type | Tl name | Z-Min | Cycle time | Holder (old) |
|---|---|---|---|---|---|---|
| 0:00:08 | ||||||
 |
1 | Drill | NO. 25 DRILL | -0.55 | 0:01:55 | |
 |
2 | Drill | NO. 31 DRILL | -0.55 | 0:00:25 | |
 |
3 | Tap RH | NO. 6-40 TAPRH | -0.58 | 0:00:08 | |
 |
4 | Endmill1 Flat | 1/4 FLAT ENDMILL | -0.138 | 0:00:41 | |
 |
5 | Chamfer mill | 1/2 CARB CHAMFERMILL | -0.035 | 135:00:40 | |
 |
6 | Endmill2 Sphere | 1/16 BALL ENDMILL | -0.01 | 0:01:37 | |
 |
7 | Drill | NO. 19 DRILL | -0.45 | 0:00:36 | |
 |
8 | Tap RH | NO. 10-32 TAPRH | -0.35 | 0:00:12 | |