| Programmer | Ray |
| Date | 10/24/2023 - 6:11:01 AM |
| MC-Filename | backCoverPlug-Rev A-1st Opp.mcam |
| File description | Merged File name = R:\RAYT\FIXTURES\DMU50 FIXTURES\V562M 4 INCH VISE ON VP56M RISER.mcam Original Import File name = X:\machine shop transfer\GeneM\pH2023\backCoverPlug2.SLDPRT |
| Machine | DMG_DMU_TNC.mcam-mmd |
| Postprocessor | DMG_DMU_TNC.psT |
| Stock | X0.750 Y1.000 Z0.750 |
MyComment
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:14:33 | |||||||
 |
12 | Ball endmill | 3/64 BALL ENDMILL | 0.046 | 2.25 | 0.375 | -0.2008 |
 |
13 | Flat endmill | 3/8 FLAT ENDMILL | 0.375 | 2.5 | 0.75 | -0.57 |
 |
14 | Flat endmill | 1/4 FLAT ENDMILL | 0.25 | 2.5 | 0.5 | -0.449 |
 |
16 | Slotting | 0.62 Special Keycutter KSC620-200 | 0.62 | 2.0 | 0.14 | -0.399 |
 |
17 | Drill | NO. 50 CARBIDE DRILL - HARVEY TOOL | 0.07 | 2.0 | 1.0 | -0.61 |
 |
18 | Thread | 0.064 Thread Mill 2-56 | 0.064 | 1.0 | 0.25 | -0.57 |
 |
19 | Drill | NO. 54 DRILL | 0.055 | 2.0 | 1.0 | -0.35 |
 |
20 | Right-hand tap | NO. 0-80 TAPRH | 0.06 | 3.0 | 2.0 | -0.275 |