| Programmer | Ray |
| Date | 10/26/2023 - 11:11:24 AM |
| MC-Filename | backCoverPlug-Rev A-2nd Opp.mcam |
| File description | Merged File name = R:\RAYT\FIXTURES\DMU50 FIXTURES\V562M 4 INCH VISE ON VP56M RISER.mcam Original Import File name = X:\machine shop transfer\GeneM\pH2023\backCoverPlug2.SLDPRT |
| Machine | DMG_DMU_TNC.mcam-mmd |
| Postprocessor | DMG_DMU_TNC.psT |
| Stock | X0.700 Y0.860 Z0.540 |
MyComment
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:18:35 | |||||||
 |
12 | Ball endmill | 3/64 BALL ENDMILL | 0.0469 | 2.25 | 0.375 | -0.1197 |
 |
13 | Drill | LTR. A CARBIDE DRILL | 0.234 | 3.0 | 2.0 | -0.61 |
 |
14 | Flat endmill | 3/16 FLAT ENDMILL | 0.1875 | 2.375 | 0.4375 | -0.0837 |
 |
15 | Slotting | 0.1875 Slotting Tool or Saw | 0.1875 | 2.0 | 0.02 | -0.0837 |
 |
17 | Ball endmill | 1/8 BALL ENDMILL | 0.125 | 2.25 | 0.375 | -0.083 |
 |
18 | Thread | 0.072 Thread Mill | 0.072 | 1.25 | 0.25 | -0.08 |
 |
19 | Drill | .237 CARB REAMER | 0.237 | 3.0 | 2.0 | -0.59 |