# ALL Mastercam products should use "Mastercam" as their APPLICATION name.

APPLICATION Mastercam

# 2D TOOLPATHS ////////////////////////////////////////////////////////////

FUNC_DLL "MCMILL.DLL"
RES_DLL  "OPMANRES.DLL"
CATEGORY 3325

FUNCTION CPP "drill_assoc"
	RES_DLL  "OPMANRES.DLL"
	SPNG 5807
	LPNG 25062
	TIP 32770
	FCAT  "2D Toolpaths"
	FNAME "Drill"
END_FUNCTION

FUNCTION CPP "ProcessHoleAssoc"
	RES_DLL  "OPMANRES.DLL"
	SPNG 8735
	LPNG 26055
	TIP 33786
	FCAT  "2D Toolpaths"
	FNAME "ProcessHole"
END_FUNCTION

FUNCTION CPP "ChamferDrillAssoc"
	RES_DLL  "OPMANRES.DLL"
	SPNG 8721
	LPNG 25672
	TIP 33787
	FCAT  "2D Toolpaths"
	FNAME "ChamferDrill"
END_FUNCTION

FUNCTION CPP "AdvancedDrillAssoc"
	RES_DLL  "OPMANRES.DLL"
	SPNG 8720
	LPNG 25671
	TIP 33788
	FCAT  "2D Toolpaths"
	FNAME "AdvancedDrill"
END_FUNCTION

FUNCTION CPP "ctour_assoc"
	RES_DLL  "OPMANRES.DLL"
	SPNG 5808
	LPNG 25053
	TIP 32771
	FCAT  "2D Toolpaths"
	FNAME "Contour"
END_FUNCTION

FUNCTION CPP "chamfer_assoc"
	RES_DLL  "OPMANRES.DLL"
	SPNG 28086
	LPNG 26001
	TIP 137
	FCAT  "2D Toolpaths"
	FNAME "Model Chamfer"
END_FUNCTION

FUNCTION CPP "pock_assoc"
	RES_DLL  "OPMANRES.DLL"
	SPNG 5809
	LPNG 25054
	TIP 32772
	FCAT  "2D Toolpaths"
	FNAME "Pocket"
END_FUNCTION

FUNCTION CPP "face_assoc"
	RES_DLL  "OPMANRES.DLL"
	SPNG 5812
	LPNG 25055
	TIP 32773
	FCAT  "2D Toolpaths"
	FNAME "Face"
END_FUNCTION

FUNCTION CPP "sawmill_assoc"
	SPNG 5814
	LPNG 5815
	TIP 32786
	FCAT  "2D Toolpaths"
	FNAME "Saw"
END_FUNCTION

FUNCTION CPP "hmm_2d_DynamicArea"
	RES_DLL  "OPMANRES.DLL"
	SPNG 6285
	LPNG 25057
	TIP 4221
	FCAT  "2D Toolpaths"
	FNAME "Dynamic Area"
END_FUNCTION

FUNCTION CPP "hmm_2d_DynamicContour"
	RES_DLL  "OPMANRES.DLL"
	SPNG 5816
	LPNG 25059
	TIP 4227
	FCAT  "2D Toolpaths"
	FNAME "Dynamic Contour"
END_FUNCTION

FUNCTION CPP "hmm_2d_AreaMill"
	RES_DLL  "OPMANRES.DLL"
	SPNG 5818
	LPNG 25058
	TIP 4233
	FCAT  "2D Toolpaths"
	FNAME "Area"
END_FUNCTION

FUNCTION CPP "hmm_2d_PeelMill"
	RES_DLL  "OPMANRES.DLL"
	SPNG 5822
	LPNG 25060
	TIP 4239
	FCAT  "2D Toolpaths"
	FNAME "Peel"
END_FUNCTION

FUNCTION CPP "hmm_2d_BlendMill"
	RES_DLL  "OPMANRES.DLL"
	SPNG 5824
	LPNG 25061
	TIP 4242
	FCAT  "2D Toolpaths"
	FNAME "Blend"
END_FUNCTION

FUNCTION CPP "circmill"
	RES_DLL  "OPMANRES.DLL"
	SPNG 5826
	LPNG 25063
	TIP 32774
	FCAT  "2D Toolpaths"
	FNAME "Cirmill"
END_FUNCTION

FUNCTION CPP "thread_mill"
	RES_DLL  "OPMANRES.DLL"
	SPNG 5828
	LPNG 25066
	TIP 32775
	FCAT  "2D Toolpaths"
	FNAME "Thread Mill"
END_FUNCTION

FUNCTION CPP "slotmill"
	RES_DLL  "OPMANRES.DLL"
	SPNG 5830
	LPNG 25056
	TIP 32776
	FCAT  "2D Toolpaths"
	FNAME "Slot Mill"
END_FUNCTION

FUNCTION CPP "helix_bore"
	RES_DLL  "OPMANRES.DLL"
	SPNG 5832
	LPNG 25065
	TIP 32777
	FCAT  "2D Toolpaths"
	FNAME "Helix Bore"
END_FUNCTION

FUNCTION CPP "pro_drill"
	SPNG 5834
	LPNG 5835
	TIP 32778
	FCAT  "2D Toolpaths"
	FNAME "Auto Drill"
END_FUNCTION

FUNCTION CPP "start_hole_dialog"
	SPNG 5836
	LPNG 5837
	TIP 32779
	FCAT  "2D Toolpaths"
	FNAME "Start Hole"
END_FUNCTION

FUNCTION CPP "manual_entry_toolpath_dialog"
	SPNG 5838
	LPNG 5839
	TIP 32780
	FCAT  "2D Toolpaths"
	FNAME "Manual Entry"
END_FUNCTION

FUNCTION CPP "point_toolpath_dialog"
	RES_DLL  "OPMANRES.DLL"
	SPNG 5840
	LPNG 25064
	TIP 32781
	FCAT  "2D Toolpaths"
	FNAME "Point"
END_FUNCTION

FUNCTION CPP "trim_toolpath_dialog"
	SPNG 5842
	LPNG 5843
	TIP 32782
	FCAT  "2D Toolpaths"
	FNAME "Trim"
END_FUNCTION

FUNCTION CPP "xform_toolpath_dialog"
	SPNG 5844
	LPNG 5845
	TIP 32783
	FCAT  "2D Toolpaths"
	FNAME "Transform"
END_FUNCTION

#FUNCTION CPP "solid_drill_toolpath_dialog"
#	SBMP IDB_solid_drill_toolpath_dialog_16
#	LBMP IDB_solid_drill_toolpath_dialog_24
#	TIP  ID_TOOLPATH_SOLID_DRILL
#	FCAT  "2D Toolpaths"
#	FNAME ""
#END_FUNCTION

FUNCTION CPP "fbm_drill_toolpath_dialog"
	SPNG 5846
	LPNG 5847
	UICALLBACK "OnUpdateFBMToolbar"
	TIP 169
	FCAT  "2D Toolpaths"
	FNAME "FBM Drill"
END_FUNCTION

FUNCTION CPP "fbm_pocket_toolpath_dialog"
	SPNG 5848
	LPNG 5849
	UICALLBACK "OnUpdateFBMToolbar"
	TIP 170
	FCAT  "2D Toolpaths"
	FNAME "FBM Mill"
END_FUNCTION

#FUNCTION CPP "fbm_contour_toolpath_dialog"
#	SBMP IDB_fbm_contour_toolpath_dialog_16
#	LBMP IDB_fbm_contour_toolpath_dialog_24
#	TIP  IDS_TOOLPATH_FBM_CONTOUR
#	FCAT  "2D Toolpaths"
#	FNAME "FBM Mill"
#END_FUNCTION


FUNCTION CPP "safelink_toolpath_dialog"
	SPNG 6455
	LPNG 6456
	TIP 32816
	FCAT  "2D Toolpaths"
	FNAME "Safelink"
END_FUNCTION

///TPEDIT
FUNCTION CPP "DoTPEdit"
	HIDDEN
	FCAT  "Hidden"
	FNAME ""
END_FUNCTION

RES_DLL  "MCROUTERRES.DLL"

FUNCTION CPP "multi_drill_assoc"
	SPNG 325
	LPNG 326
	TIP 32768
	FCAT  "2D Toolpaths"
	FNAME "Block Drilling"
END_FUNCTION

# Stock Model ////////////////////////////////////////////////////////////

FUNC_DLL "MCMILL.DLL"
RES_DLL  "OPMANRES.DLL"
CATEGORY 3371

FUNCTION CPP "stock_model_dialog"
	SPNG 5850
	LPNG 5851
	UICALLBACK "OnUpdateStockModelToolbar"
	TIP 173
	FCAT  "Stock Model"
	FNAME "Stock Model"
END_FUNCTION

FUNCTION CPP "stock_model_compare_dialog"
	SPNG 5852
	LPNG 5853
	UICALLBACK "OnUpdateStockModelCompareToolbar"
	TIP 101
	FCAT  "Stock Model"
	FNAME "Compare Stock Model"
END_FUNCTION

FUNCTION CPP "stock_model_export_dialog"
	SPNG 5854
	LPNG 5855
	UICALLBACK "OnUpdateStockModelExportToolbar"
	TIP 115
	FCAT  "Stock Model"
	FNAME "Export Stock Model to File"
END_FUNCTION

FUNCTION CPP "stock_model_convert_pmesh_dialog"
	SPNG 5856
	LPNG 5857
	UICALLBACK "OnUpdateStockModelPmeshToolbar"
	TIP 118
	FCAT  "Stock Model"
	FNAME "Convert Stock Model to Mesh"
END_FUNCTION

# ANALYZE /////////////////////////////////////////////////////////////////

FUNC_DLL "MCCADUTIL.DLL"
RES_DLL  "MCCADUTILRES.DLL"
CATEGORY 3326

FUNCTION CPP "AnalyzeStart"
	SPNG 4798
	LPNG 4799
	TIP 3327
	INLINE
	FCAT  "Analyze"
	FNAME "Entity"
END_FUNCTION

FUNCTION CPP "AnalyzePtStart"
	SPNG 4802
	LPNG 4803
	TIP 32787
	INLINE
	FCAT  "Analyze"
	FNAME "Position"
END_FUNCTION

FUNCTION CPP "AnalyzeBtwnPtStart"
	SPNG 4792
	LPNG 4793
	TIP 32788
	INLINE
	FCAT  "Analyze"
	FNAME "Distance"
END_FUNCTION

FUNCTION CPP "AnalyzeDistanceAlongStart"
	SPNG 4851
	LPNG 4852
	TIP 32846
	INLINE
	FCAT  "Analyze"
	FNAME "Distance Along"
END_FUNCTION

FUNCTION CPP "AnalyzeSolidPropsStart"
	SPNG 4804
	LPNG 4805
	TIP 32789
	INLINE
	FCAT  "Analyze"
	FNAME "Solid / Mesh Properties"
END_FUNCTION

FUNCTION CPP "AnalyzeAngleStart"
	SPNG 4780
	LPNG 4781
	TIP 32790
	INLINE
	FCAT  "Analyze"
	FNAME "Angle"
END_FUNCTION

FUNCTION CPP "AnalyzeNumberStart"
	SPNG 4800
	LPNG 4801
	TIP 32791
	INLINE
	FCAT  "Analyze"
	FNAME "Number"
END_FUNCTION

FUNCTION CPP "AnalyzeSurfaceAreaStart"
	SPNG 4806
	LPNG 4807
	TIP 32792
	INLINE
	FCAT  "Analyze"
	FNAME "Surface Area"
END_FUNCTION

FUNCTION CPP "Analyze2dAreaStart"
	SPNG 4778
	LPNG 4779
	TIP 32793
	INLINE
	FCAT  "Analyze"
	FNAME "2D Area"
END_FUNCTION

FUNCTION CPP "AnalyzeDbStart"
	SPNG 4790
	LPNG 4791
	TIP 32794
	INLINE
	FCAT  "Analyze"
	FNAME "Database"
END_FUNCTION

FUNCTION CPP "AnalyzeDynoStart"
	SPNG 4796
	LPNG 4797
	TIP 32795
	INLINE
	FCAT  "Analyze"
	FNAME "Dynamic"
END_FUNCTION

FUNCTION CPP "AnalyzeToolpath"
	SPNG 1003
	LPNG 1004
	TIP 3328
	FCAT  "Analyze"
	FNAME "Toolpath"
END_FUNCTION

FUNCTION CPP "AnalyzeTestSurfacesStart"
	SPNG 4808
	LPNG 4809
	TIP 32796
	INLINE
	FCAT  "Analyze"
	FNAME "Test Surfaces"
END_FUNCTION

FUNCTION CPP "AnalyzeCheckSolidStart"
	SPNG 4784
	LPNG 4785
	TIP 32797
	INLINE
	FCAT  "Analyze"
	FNAME "Check Solid"
END_FUNCTION

FUNCTION CPP "AnalyzeContourStart"
	SPNG 4786
	LPNG 4787
	TIP 32798
	INLINE
	FCAT  "Analyze"
	FNAME "Contour"
END_FUNCTION

FUNCTION CPP "AnalyzeChainStart"
	SPNG 4782
	LPNG 4783
	TIP 32799
	INLINE
	FCAT  "Analyze"
	FNAME "Chain"
END_FUNCTION

FUNCTION CPP "SurfaceCurvatureAnalysis"
	SPNG 4788
	LPNG 4789
	TIP 4171
	FCAT  "Analyze"
	FNAME "Curvature"
END_FUNCTION

FUNCTION CPP "SurfaceDraftAngleAnalysis"
	SPNG 4794
	LPNG 4795
	TIP 4172
	FCAT  "Analyze"
	FNAME "Draft Angle"
END_FUNCTION

# AUTOCURSOR ////////////////////////////////////////////////////////////////////

FUNC_DLL "EXE"
RES_DLL  "OPMANRES.DLL"
CATEGORY 3328

FUNCTION CPP "AutoCursor_Default"
	HIDDEN
	SPNG 5880
	LPNG 5881
	UICALLBACK "OnUpdateAutoCursor"
	TIP 3340
	NOTASK
	INLINE
	FCAT  "AutoCursor"
	FNAME "AutoCursor"
END_FUNCTION

FUNCTION CPP "AutoCursor_Origin"
	SPNG 5858
	LPNG 5859
	UICALLBACK "OnUpdateAutoCursor"
	TIP 3329
	INLINE
	FCAT  "AutoCursor"
	FNAME "Origin"
END_FUNCTION

FUNCTION CPP "AutoCursor_Center"
	SPNG 5860
	LPNG 5861
	UICALLBACK "OnUpdateAutoCursor"
	TIP 3330
	NOTASK
	INLINE
	FCAT  "AutoCursor"
	FNAME "Center"
END_FUNCTION

FUNCTION CPP "AutoCursor_Center_Lock"
	SPNG 5860
	LPNG 5861
	UICALLBACK "OnUpdateAutoCursor"
	TIP 3348
	NOTASK
	INLINE
	FCAT  "AutoCursor"
	FNAME "Lock Center"
END_FUNCTION

FUNCTION CPP "AutoCursor_FaceCenter"
	SPNG 8697
	LPNG 8698
	UICALLBACK "OnUpdateAutoCursor"
	TIP 457
	NOTASK
	INLINE
	FCAT  "AutoCursor"
	FNAME "Face Center"
END_FUNCTION

FUNCTION CPP "AutoCursor_FaceCenter_Lock"
	SPNG 8697
	LPNG 8698
	UICALLBACK "OnUpdateAutoCursor"
	TIP 458
	NOTASK
	INLINE
	FCAT  "AutoCursor"
	FNAME "Lock Face Center"
END_FUNCTION

FUNCTION CPP "AutoCursor_Endpoints"
	SPNG 5862
	LPNG 5863
	UICALLBACK "OnUpdateAutoCursor"
	TIP 3331
	NOTASK
	INLINE
	FCAT  "AutoCursor"
	FNAME "Endpoints"
END_FUNCTION

FUNCTION CPP "AutoCursor_Endpoints_Lock"
	SPNG 5862
	LPNG 5863
	UICALLBACK "OnUpdateAutoCursor"
	TIP 3358
	NOTASK
	INLINE
	FCAT  "AutoCursor"
	FNAME "Lock Endpoints"
END_FUNCTION

FUNCTION CPP "AutoCursor_Intersect"
	SPNG 5864
	LPNG 5865
	UICALLBACK "OnUpdateAutoCursor"
	TIP 3332
	INLINE
	FCAT  "AutoCursor"
	FNAME "Intersection"
END_FUNCTION

FUNCTION CPP "AutoCursor_Intersect_Lock"
	SPNG 5864
	LPNG 5865
	UICALLBACK "OnUpdateAutoCursor"
	TIP 3363
	INLINE
	FCAT  "AutoCursor"
	FNAME "Lock Intersection"
END_FUNCTION

FUNCTION CPP "AutoCursor_Midpoint"
	SPNG 5866
	LPNG 5867
	UICALLBACK "OnUpdateAutoCursor"
	TIP 3333
	NOTASK
	INLINE
	FCAT  "AutoCursor"
	FNAME "Midpoint"
END_FUNCTION

FUNCTION CPP "AutoCursor_Midpoint_Lock"
	SPNG 5866
	LPNG 5867
	UICALLBACK "OnUpdateAutoCursor"
	TIP 3372
	NOTASK
	INLINE
	FCAT  "AutoCursor"
	FNAME "Lock Midpoint"
END_FUNCTION

FUNCTION CPP "AutoCursor_Midpoint2"
	SPNG 7204
	LPNG 7205
	UICALLBACK "OnUpdateAutoCursor"
	TIP 361
	INLINE
	FCAT  "AutoCursor"
	FNAME "Midpoint 2 pts"
END_FUNCTION

FUNCTION CPP "AutoCursor_Midpoint2_Lock"
	SPNG 7204
	LPNG 7205
	UICALLBACK "OnUpdateAutoCursor"
	TIP 362
	INLINE
	FCAT  "AutoCursor"
	FNAME "Lock Midpoint 2 pts"
END_FUNCTION

FUNCTION CPP "AutoCursor_Point"
	SPNG 5868
	LPNG 5869
	UICALLBACK "OnUpdateAutoCursor"
	TIP 3334
	NOTASK
	INLINE
	FCAT  "AutoCursor"
	FNAME "Point"
END_FUNCTION

FUNCTION CPP "AutoCursor_Point_Lock"
	SPNG 5868
	LPNG 5869
	UICALLBACK "OnUpdateAutoCursor"
	TIP 3373
	NOTASK
	INLINE
	FCAT  "AutoCursor"
	FNAME "Lock Point"
END_FUNCTION

FUNCTION CPP "AutoCursor_Quad"
	SPNG 5870
	LPNG 5871
	UICALLBACK "OnUpdateAutoCursor"
	TIP 3335
	NOTASK
	INLINE
	FCAT  "AutoCursor"
	FNAME "Quadrant"
END_FUNCTION

FUNCTION CPP "AutoCursor_Quad_Lock"
	SPNG 5870
	LPNG 5871
	UICALLBACK "OnUpdateAutoCursor"
	TIP 3374
	NOTASK
	INLINE
	FCAT  "AutoCursor"
	FNAME "Lock Quadrant"
END_FUNCTION

FUNCTION CPP "AutoCursor_Nearest"
	SPNG 5872
	LPNG 5873
	UICALLBACK "OnUpdateAutoCursor"
	TIP 3336
	NOTASK
	INLINE
	FCAT  "AutoCursor"
	FNAME "Nearest"
END_FUNCTION

FUNCTION CPP "AutoCursor_Relative"
	SPNG 5874
	LPNG 5875
	UICALLBACK "OnUpdateAutoCursor"
	TIP 3337
	NOTASK
	INLINE
	FCAT  "AutoCursor"
	FNAME "Relative"
END_FUNCTION

FUNCTION CPP "AutoCursor_Along_Relative"
	SPNG 5882
	LPNG 5883
	UICALLBACK "OnUpdateAutoCursor"
	TIP 3341
	NOTASK
	INLINE
	FCAT  "AutoCursor"
	FNAME "Along"
END_FUNCTION

FUNCTION CPP "AutoCursor_Tangent"
	SPNG 5876
	LPNG 5877
	UICALLBACK "OnUpdateAutoCursor"
	TIP 3338
	INLINE
	FCAT  "AutoCursor"
	FNAME "Tangent"
END_FUNCTION

FUNCTION CPP "AutoCursor_Perpend"
	SPNG 5878
	LPNG 5879
	UICALLBACK "OnUpdateAutoCursor"
	TIP 3339
	INLINE
	FCAT  "AutoCursor"
	FNAME "Perpendicular"
END_FUNCTION

FUNCTION CPP "AutoCursor_TmpMidPnt"
	SPNG 6463
	LPNG 6464
	UICALLBACK "OnUpdateAutoCursor"
	TIP 360
	NOTASK
	INLINE
	FCAT  "AutoCursor"
	FNAME "Temporary Midpoints"
END_FUNCTION

FUNCTION CPP "doAutocursorDlg"
	SPNG 5880
	LPNG 5881
	UICALLBACK "OnUpdateAutoCursor"
	TIP 3340
	INLINE
	FCAT  "AutoCursor"
	FNAME "AutoCursor"
END_FUNCTION

FUNCTION CPP "AutoCursorFastPoint"
	HIDDEN
	SPNG 6432
	LPNG 6433
	UICALLBACK "OnUpdateAutoCursor"
	TIP 1584
	INLINE
	FCAT  "AutoCursor"
	FNAME "Fast Point"
END_FUNCTION

# C-AXIS TOOLPATHS ////////////////////////////////////////////////////////

FUNC_DLL "MCLATHE.DLL"
RES_DLL  "MCLATHERES.DLL"
CATEGORY 3906

FUNCTION CPP "caxis_face_contour"
	SPNG 5375
	LPNG 5376
	TIP 32768
	FCAT  "C-Axis Toolpaths"
	FNAME "Face Contour"
END_FUNCTION

FUNCTION CPP "caxis_cross_contour"
	SPNG 5377
	LPNG 5378
	TIP 32769
	FCAT  "C-Axis Toolpaths"
	FNAME "Cross Contour"
END_FUNCTION

FUNCTION CPP "caxis_contour"
	SPNG 5379
	LPNG 5380
	TIP 32770
	FCAT  "C-Axis Toolpaths"
	FNAME "C-Axis Contour"
END_FUNCTION

FUNCTION CPP "caxis_face_drill"
	SPNG 5381
	LPNG 5382
	TIP 32771
	FCAT  "C-Axis Toolpaths"
	FNAME "Face Drill"
END_FUNCTION

FUNCTION CPP "caxis_cross_drill"
	SPNG 5383
	LPNG 5384
	TIP 32772
	FCAT  "C-Axis Toolpaths"
	FNAME "Cross Drill"
END_FUNCTION

FUNCTION CPP "caxis_drill"
	SPNG 5385
	LPNG 5386
	TIP 32773
	FCAT  "C-Axis Toolpaths"
	FNAME "C-Axis Drill"
END_FUNCTION


# CONSTRUCTION ATTRIBUTES /////////////////////////////////////////////////

FUNC_DLL "EXE"
RES_DLL "OPMANRES.DLL"
CATEGORY 3342

FUNCTION CPP "OnScreenChangeWireframeColor"
	HIDDEN
	CALL_FUNC "OnScreenChangeColor"
	PARAM 0
	SPNG 5884
	LPNG 5885
	TIP 33081
	INLINE
	FCAT  "Construction Attributes"
	FNAME "Set Wireframe Color"
END_FUNCTION

FUNCTION CPP "OnScreenChangeSolidsColor"
	HIDDEN
	CALL_FUNC "OnScreenChangeColor"
	PARAM 1
	SPNG 5884
	LPNG 5885
	TIP 33595
	INLINE
	FCAT  "Construction Attributes"
	FNAME "Set Solid Color"
END_FUNCTION

FUNCTION CPP "OnScreenChangeSurfacesColor"
	HIDDEN
	CALL_FUNC "OnScreenChangeColor"
	PARAM 2
	SPNG 5884
	LPNG 5885
	TIP 33596
	INLINE
	FCAT  "Construction Attributes"
	FNAME "Set Surface Color"
END_FUNCTION

FUNCTION CPP "OnScreenAttributes"
	SPNG 5888
	LPNG 5889
	TIP 33083
	INLINE
	FCAT  "Construction Attributes"
	FNAME "Attributes"
END_FUNCTION

FUNCTION CPP "OnScreenZDepth"
	SPNG 5892
	LPNG 5893
	INLINE
	TIP 33084
	FCAT  "Construction Attributes"
	FNAME "Construction Depth"
END_FUNCTION

FUNCTION CPP "OnScreen2D3DToggle"
	SPNG 5894
	LPNG 5895
	INLINE
	TIP 33086
	FCAT  "Construction Attributes"
	FNAME "Toggle 2D/3D"
END_FUNCTION

FUNCTION CPP "RunEntityAttributesManagerDlg"
	SPNG 33604
	LPNG 33605
	TIP 33603
	FCAT  "Construction Attributes"
	FNAME "Attribute Manager"
END_FUNCTION

# CONSTRUCTION PLANE MANIPULATION //////////////////////////////////////////////

FUNC_DLL "EXE"
RES_DLL "OPMANRES.DLL"
CATEGORY 3343

FUNCTION CPP "OnCPlaneTop"
	SPNG 5896
	LPNG 5897
	TIP 32813
	INLINE
	FCAT  "Construction Plane"
	FNAME "Top Cplane"
END_FUNCTION

FUNCTION CPP "OnCPlaneBottom"
	SPNG 5916
	LPNG 5917
	TIP 33261
	INLINE
	FCAT  "Construction Plane"
	FNAME "Bottom Cplane"
END_FUNCTION

FUNCTION CPP "OnCPlaneFront"
	SPNG 5898
	LPNG 5899
	TIP 32814
	INLINE
	FCAT  "Construction Plane"
	FNAME "Front Cplane"
END_FUNCTION

FUNCTION CPP "OnCPlaneBack"
	SPNG 5918
	LPNG 5919
	TIP 33260
	INLINE
	FCAT  "Construction Plane"
	FNAME "Back Cplane"
END_FUNCTION

FUNCTION CPP "OnCPlaneSide"
	SPNG 5900
	LPNG 5901
	TIP 32815
	INLINE
	FCAT  "Construction Plane"
	FNAME "Right Cplane"
END_FUNCTION

FUNCTION CPP "OnCPlaneLeftSide"
	SPNG 5920
	LPNG 5921
	TIP 33262
	INLINE
	FCAT  "Construction Plane"
	FNAME "Left Cplane"
END_FUNCTION

FUNCTION CPP "OnCPlaneIso"
	SPNG 5922
	LPNG 5923
	TIP 33263
	INLINE
	FCAT  "Construction Plane"
	FNAME "Isometric Cplane"
END_FUNCTION

FUNCTION CPP "OnCPlaneIsoRev"
	SPNG 5924
	LPNG 5925
	TIP 33049
	INLINE
	FCAT  "Construction Plane"
	FNAME "Isometric Reverse Cplane"
END_FUNCTION

FUNCTION CPP "OnCPlaneTrimetric"
	SPNG 5926
	LPNG 5927
	TIP 33050
	INLINE
	FCAT  "Construction Plane"
	FNAME "Trimetric Cplane"
END_FUNCTION

FUNCTION CPP "OnCplaneLathe_XP_ZP"
	SPNG 26016
	LPNG 26017
	TIP 25528
	HIDDEN
	INLINE
	FCAT  "Construction Plane"
	FNAME "+X+Z"
END_FUNCTION

FUNCTION CPP "OnCplaneLathe_XM_ZP"
	SPNG 26018
	LPNG 26019
	TIP 25526
	HIDDEN
	INLINE
	FCAT  "Construction Plane"
	FNAME "-X+Z"
END_FUNCTION

FUNCTION CPP "OnCplaneLathe_XP_ZM"
	SPNG 26020
	LPNG 26021
	TIP 25527
	HIDDEN
	INLINE
	FCAT  "Construction Plane"
	FNAME "+X-Z"
END_FUNCTION

FUNCTION CPP "OnCplaneLathe_XM_ZM"
	SPNG 26022
	LPNG 26023
	TIP 25525
	HIDDEN
	INLINE
	FCAT  "Construction Plane"
	FNAME "-X-Z"
END_FUNCTION

FUNCTION CPP "OnCplaneLathe_DP_ZP"
	SPNG 26024
	LPNG 26025
	TIP 25524
	HIDDEN
	INLINE
	FCAT  "Construction Plane"
	FNAME "+D+Z"
END_FUNCTION

FUNCTION CPP "OnCplaneLathe_DM_ZP"
	SPNG 26026
	LPNG 26027
	TIP 25522
	HIDDEN
	INLINE
	FCAT  "Construction Plane"
	FNAME "-D+Z"
END_FUNCTION

FUNCTION CPP "OnCplaneLathe_DP_ZM"
	SPNG 26028
	LPNG 26029
	TIP 25523
	HIDDEN
	INLINE
	FCAT  "Construction Plane"
	FNAME "+D-Z"
END_FUNCTION

FUNCTION CPP "OnCplaneLathe_DM_ZM"
	SPNG 26030
	LPNG 26031
	TIP 25521
	HIDDEN
	INLINE
	FCAT  "Construction Plane"
	FNAME "-D-Z"
END_FUNCTION

FUNCTION CPP "OnCPlaneEqualsTPlane"
	TIP 33018
	INLINE
	HIDDEN
	FCAT  "Construction Plane"
	FNAME "Cplane = Tplane"
END_FUNCTION


# DRAFTING ////////////////////////////////////////////////////////////////

FUNC_DLL "MCCAD.DLL"
RES_DLL  "OPMANRES.DLL"
CATEGORY 3344

FUNCTION CPP "doDraft_REGENERATE_AUTOMATIC"
	SPNG 5938
	LPNG 5939
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38024
	FCAT  "Drafting"
	FNAME "Automatic Dimension Regen"
END_FUNCTION

FUNCTION CPP "doDraft_REGENERATE_VALIDATE"
	SPNG 5940
	LPNG 5941
	TIP 38026
	UICALLBACK "OnUpdateDraftingToolbar"
	FCAT  "Drafting"
	FNAME "Validate Dimension Regen"
END_FUNCTION

FUNCTION CPP "doDraft_REGENERATE_SELECTION"
	SPNG 5942
	LPNG 5943
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38025
	FCAT  "Drafting"
	FNAME "Select Dimension for Regen"
END_FUNCTION

FUNCTION CPP "doDraft_REGENERATE_ALL"
	SPNG 5944
	LPNG 5945
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38023
	FCAT  "Drafting"
	FNAME "Regen All Dimensions"
END_FUNCTION

FUNCTION CPP "doDraft_DIMENSION_HORIZONTAL"
	SPNG 5946
	LPNG 5947
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38006
	FCAT  "Drafting"
	FNAME "Horizontal Dimension"
END_FUNCTION

FUNCTION CPP "doDraft_DIMENSION_VERTICAL"
	SPNG 5948
	LPNG 5949
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38017
	FCAT  "Drafting"
	FNAME "Vertical Dimension"
END_FUNCTION

FUNCTION CPP "doDraft_DIMENSION_PARALLEL"
	SPNG 5950
	LPNG 5951
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38013
	FCAT  "Drafting"
	FNAME "Parallel Dimension"
END_FUNCTION

FUNCTION CPP "doDraft_DIMENSION_BASELINE"
	SPNG 5952
	LPNG 5953
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38003
	FCAT  "Drafting"
	FNAME "Baseline Dimension"
END_FUNCTION

FUNCTION CPP "doDraft_DIMENSION_CHAINED"
	SPNG 5954
	LPNG 5955
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38004
	FCAT  "Drafting"
	FNAME "Chained Dimension"
END_FUNCTION

FUNCTION CPP "doDraft_DIMENSION_ANGULAR"
	SPNG 5956
	LPNG 5957
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38002
	FCAT  "Drafting"
	FNAME "Angular Dimension"
END_FUNCTION

FUNCTION CPP "doDraft_DIMENSION_CIRCULAR"
	SPNG 5958
	LPNG 5959
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38005
	FCAT  "Drafting"
	FNAME "Circular Dimension"
END_FUNCTION

FUNCTION CPP "doDraft_DIMENSION_PERPENDICULAR"
	SPNG 5960
	LPNG 5961
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38014
	FCAT  "Drafting"
	FNAME "Perpendicular Dimension"
END_FUNCTION

FUNCTION CPP "doDraft_DIMENSION_TANGENT"
	SPNG 5962
	LPNG 5963
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38016
	FCAT  "Drafting"
	FNAME "Tangent Dimension"
END_FUNCTION

FUNCTION CPP "doDraft_DIMENSION_ORD_HORIZ"
	SPNG 5964
	LPNG 5965
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38009
	FCAT  "Drafting"
	FNAME "Horizontal Ordinate Dimension"
END_FUNCTION

FUNCTION CPP "doDraft_DIMENSION_ORD_VERT"
	SPNG 5966
	LPNG 5967
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38011
	FCAT  "Drafting"
	FNAME "Vertical Ordinate Dimension"
END_FUNCTION

FUNCTION CPP "doDraft_DIMENSION_ORD_PARA"
	SPNG 5968
	LPNG 5969
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38010
	FCAT  "Drafting"
	FNAME "Parallel Ordinate Dimension"
END_FUNCTION

FUNCTION CPP "doDraft_DIMENSION_ORD_EXIST"
	SPNG 5970
	LPNG 5971
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38008
	FCAT  "Drafting"
	FNAME "Add to an Existing Ordinate Dimension"
END_FUNCTION

FUNCTION CPP "doDraft_DIMENSION_ORD_WINDOW"
	SPNG 5972
	LPNG 5973
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38012
	FCAT  "Drafting"
	FNAME "Window Ordinate Dimension"
END_FUNCTION

FUNCTION CPP "doDraft_DIMENSION_ORD_ALIGN"
	SPNG 5974
	LPNG 5975
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38007
	FCAT  "Drafting"
	FNAME "Align Ordinate Dimension"
END_FUNCTION

FUNCTION CPP "doDraft_DIMENSION_POINT"
	SPNG 5976
	LPNG 5977
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38015
	FCAT  "Drafting"
	FNAME "Point Dimension"
END_FUNCTION

FUNCTION CPP "doDraft_MULTI_EDIT"
	SPNG 5978
	LPNG 5979
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38021
	FCAT  "Drafting"
	FNAME "Dimension Multi-Edit"
END_FUNCTION

FUNCTION CPP "doDraft_WITNESS"
	SPNG 5980
	LPNG 5981
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38028
	FCAT  "Drafting"
	FNAME "Create Witness Line"
END_FUNCTION

FUNCTION CPP "doDraft_HOLETABLE"
	SPNG 6198
	LPNG 6199
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38074
	FCAT  "Drafting"
	FNAME "Hole Table"
END_FUNCTION

FUNCTION CPP "doDraft_LEADER"
	SPNG 5982
	LPNG 5983
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38020
	FCAT  "Drafting"
	FNAME "Create Leader"
END_FUNCTION

FUNCTION CPP "doDraft_NOTE"
	SPNG 5984
	LPNG 5985
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38022
	FCAT  "Drafting"
	FNAME "Create Note"
END_FUNCTION

FUNCTION CPP "doDraft_HATCH"
	SPNG 5986
	LPNG 5987
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38019
	FCAT  "Drafting"
	FNAME "Create X-Hatch"
END_FUNCTION

FUNCTION CPP "doDraft_SMART"
	SPNG 5988
	LPNG 5989
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38027
	FCAT  "Drafting"
	FNAME "Smart Dimension"
END_FUNCTION

FUNCTION CPP "doDraft_GLOBALS"
	SPNG 5990
	LPNG 5991
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38018
	FCAT  "Drafting"
	FNAME "Drafting Options"
END_FUNCTION

FUNCTION CPP "doDraft_ASSOC"
	SPNG 6664
	LPNG 6665
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38073
	FCAT  "Drafting"
	FNAME "Drafting Assoc"
END_FUNCTION

FUNCTION CPP "ConvertLegacyNote"
	SPNG 8738
	LPNG 8739
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38075
	FCAT  "Drafting"
	FNAME "Convert Legacy Note"
END_FUNCTION

FUNCTION CPP "doDraft_ALIGN"
	SPNG 28083
	LPNG 28084
	UICALLBACK "OnUpdateDraftingToolbar"
	TIP 38072
	FCAT  "Drafting"
	FNAME "Align Note"
END_FUNCTION



# EDIT ////////////////////////////////////////////////////////////////////

FUNC_DLL "EXE"
RES_DLL  "OPMANRES.DLL"
CATEGORY 3345

FUNCTION CPP "Delete"
	HIDDEN
	SPNG 26014
	LPNG 26015
	TIP 33090
	FCAT  "Edit"
	FNAME "Delete"
END_FUNCTION

FUNCTION CPP "set_main_from_entity"
	SPNG 4866
	LPNG 4867
	TIP 33135
	INLINE
	FCAT  "Edit"
	FNAME "Set Main From Entity"
END_FUNCTION

FUNCTION WIN "OnEditCut"
	WINCMD 0xE123
	SPNG 4862
	LPNG 4863
	TIP 4028
	INLINE
	FCAT  "Edit"
	FNAME "Cut"
END_FUNCTION

FUNCTION WIN "OnEditCopy"
	WINCMD 0xE122
	SPNG 4860
	LPNG 4861
	TIP 4027
	INLINE
	FCAT  "Edit"
	FNAME "Copy"
END_FUNCTION

FUNCTION WIN "OnEditPaste"
	WINCMD 0xE125
	SPNG 4868
	LPNG 4869
	TIP 4029
	FCAT  "Edit"
	FNAME "Paste"
END_FUNCTION

FUNC_DLL "MCCORE.DLL"

FUNCTION CPP "SelectAllMask"
	SPNG 4892
	LPNG 4893
	TIP 32910
	INLINE
	FCAT  "Edit"
	FNAME "Select All"
END_FUNCTION

FUNCTION CPP "UndoEvent"
	ENABLED F
	UICALLBACK "OnUpdateUndoEvent"
	SPNG 4888
	LPNG 4889
	TIP 33112
	FCAT  "Edit"
	FNAME "Undo"
END_FUNCTION

FUNCTION CPP "RedoEvent"
	ENABLED F
	UICALLBACK "OnUpdateRedoEvent"
	SPNG 4880
	LPNG 4881
	TIP 33113
	FCAT  "Edit"
	FNAME "Redo"
END_FUNCTION

FUNC_DLL "MCCADUTIL.DLL"
RES_DLL  "MCCADUTILRES.DLL"

FUNCTION CPP "undelete_single"
	ENABLED F
	UICALLBACK "OnUpdateUndeleteSingle"
	SPNG 6505
	LPNG 6506
	TIP 33109
	FCAT  "Edit"
	FNAME "Undelete Entity"
END_FUNCTION

FUNCTION CPP "delete_entities"
	SPNG 4876
	LPNG 4877
	TIP 32935
	FCAT  "Edit"
	FNAME "Delete Entities"
END_FUNCTION

FUNCTION CPP "delete_all_nonassoc"
	PARAM 1
	SPNG 4878
	LPNG 4879
	TIP 32936
	FCAT  "Edit"
	FNAME "Delete Non-Associative Entities"
END_FUNCTION

FUNCTION CPP "delete_duplicates_basic"
	PARAM 0
	SPNG 4872
	LPNG 4873
	TIP 33031
	FCAT  "Edit"
	FNAME "Delete Duplicates"
END_FUNCTION

FUNCTION CPP "delete_duplicates_advanced"
	PARAM 0
	SPNG 4874
	LPNG 4875
	TIP 33035
	FCAT  "Edit"
	FNAME "Delete Duplicates (Advanced)"
END_FUNCTION

FUNCTION CPP "cpts_nurbs"
	SPNG 4914
	LPNG 4915
	TIP 3617
	FCAT  "Edit"
	FNAME "Modify Spline"
END_FUNCTION

FUNCTION CPP "UntrimSpline"
	SPNG 1010
	LPNG 1009
	TIP 3618
	FCAT  "Edit"
	FNAME "Untrim Spline"
END_FUNCTION

FUNCTION CPP "RefitSpline"
	SPNG 1018
	LPNG 1019
	TIP 3619
	FCAT  "Edit"
	FNAME "Refit Spline"
END_FUNCTION

FUNCTION CPP "EditSpline"
	FUNC_DLL "MCCAD.DLL"
	RES_DLL  "MCCADRES.DLL"
	SPNG 1024
	LPNG 1025
	TIP 3620
	FCAT  "Edit"
	FNAME "Edit Spline"
END_FUNCTION

FUNCTION CPP "simplify"
	FUNC_DLL "MCCAD.DLL"
	RES_DLL  "MCCADRES.DLL"
	SPNG 8928
	LPNG 8929
	RES_DLL  "MCCADUTILRES.DLL"
	TIP 33132
	FCAT  "Edit"
	FNAME "Simplify Spline"
END_FUNCTION

FUNCTION CPP "x_2_nurbs"
	SPNG 4898
	LPNG 4899
	TIP 32940
	FCAT  "Edit"
	FNAME "Convert to NURBS"
END_FUNCTION

FUNCTION CPP "join_selected_entities"
	SPNG 4900
	LPNG 4901
	TIP 32937
	FCAT  "Edit"
	FNAME "Join Selected Entities"
END_FUNCTION

FUNCTION CPP "WireframeDivide"
	SPNG 4926
	LPNG 4927
	TIP 33668
	FCAT  "Edit"
	FNAME "Divide"
END_FUNCTION

FUNCTION CPP "WireframeDynamicTrim"
	SPNG 5471
	LPNG 5472
	TIP 33221
	FCAT  "Edit"
	FNAME "Dynamic Trim"
END_FUNCTION

FUNCTION CPP "WireframeTrimToEntities"
	SPNG 4902
	LPNG 4903
	TIP 33107
	FCAT  "Edit"
	FNAME "Trim to Entities"
END_FUNCTION

FUNCTION CPP "WireframeTrimToPoint"
	SPNG 4928
	LPNG 4929
	TIP 33110
	FCAT  "Edit"
	FNAME "Trim to Point"
END_FUNCTION

FUNCTION CPP "WireframeModifyLength"
	SPNG 4930
	LPNG 4931
	TIP 33111
	FCAT  "Edit"
	FNAME "Modify Length"
END_FUNCTION

FUNCTION CPP "WireframeModifyVector"
	SPNG 4932
	LPNG 4933
	TIP 33112
	FCAT  "Edit"
	FNAME "Modify Vector"
END_FUNCTION

FUNCTION CPP "WireframeTrimMany"
	SPNG 4904
	LPNG 4905
	TIP 32956
	FCAT  "Edit"
	FNAME "Trim Many"
END_FUNCTION

FUNCTION CPP "WireframeBreakManyPieces"
	SPNG 4894
	LPNG 4895
	TIP 32965
	FCAT  "Edit"
	FNAME "Break Many"
END_FUNCTION

FUNCTION CPP "Break2Pieces"
	SPNG 4896
	LPNG 4897
	TIP 4041
	FCAT  "Edit"
	FNAME "Break Two Pieces"
END_FUNCTION

FUNCTION CPP "BreakAtPoints"
	SPNG 4925
	LPNG 4924
	TIP 4042
	FCAT  "Edit"
	FNAME "Break At Points"
END_FUNCTION

FUNCTION CPP "break_at_inters"
	SPNG 4906
	LPNG 4907
	TIP 32966
	FCAT  "Edit"
	FNAME "Break at Intersection"
END_FUNCTION

FUNCTION CPP "SurfToSurfDeviationAnalysis"
	SPNG 1039
	LPNG 1038
	TIP 29
	FCAT  "Analyze"
	FNAME "Surface To Surface Deviation Analysis"
END_FUNCTION

FUNCTION CPP "CurveToSurfDeviationAnalysis"
	SPNG 1041
	LPNG 1040
	TIP 244
	FCAT  "Analyze"
	FNAME "Curve To Surface Deviation Analysis"
END_FUNCTION

FUNCTION CPP "PointToSurfDeviationAnalysis"
	SPNG 1043
	LPNG 1042
	TIP 245
	FCAT  "Analyze"
	FNAME "Point To Surface Deviation Analysis"
END_FUNCTION

FUNCTION CPP "CurveToCurveDeviationAnalysis"
	SPNG 1045
	LPNG 1044
	TIP 246
	FCAT  "Analyze"
	FNAME "Curve To Curve Deviation Analysis"
END_FUNCTION

FUNCTION CPP "PointToCurveDeviationAnalysis"
	SPNG 1047
	LPNG 1046
	TIP 247
	FCAT  "Analyze"
	FNAME "Point To Curve Deviation Analysis"
END_FUNCTION

FUNCTION CPP "orient_normals"
    SPNG 4920
    LPNG 4921
	TIP 256
	FCAT  "Edit"
	FNAME "Orient Normals"
END_FUNCTION

FUNCTION CPP "set_normals"
	SPNG 4922
	LPNG 4923
	TIP 33403
	FCAT  "Edit"
	FNAME "Set Normal"
END_FUNCTION

FUNCTION CPP "change_normals"
	SPNG 4918
	LPNG 4919
	TIP 33405
	FCAT  "Edit"
	FNAME "Change Normal"
END_FUNCTION

FUNCTION CPP "close_arc"
	SPNG 4912
	LPNG 4913
	TIP 32957
	FCAT  "Edit"
	FNAME "Close Arc"
END_FUNCTION

FUNCTION CPP "break_draft_XH_CD"
	SPNG 4910
	LPNG 4911
	TIP 32968
	FCAT  "Edit"
	FNAME "Break Drafting into Lines"
END_FUNCTION

FUNCTION CPP "break_circles"
	SPNG 4908
	LPNG 4909
	TIP 32971
	FCAT  "Edit"
	FNAME "Break Circles"
END_FUNCTION

# MESH ////////////////////////////////////////////////////////////////////

FUNC_DLL "MCCADUTIL.DLL"
RES_DLL  "MCCADUTILRES.DLL"
CATEGORY 349

FUNCTION CPP "MeshTrimToPlane"
	SPNG 327
	LPNG 328
	TIP 329
	FCAT  "Mesh"
	FNAME "Mesh Trim to Plane"
END_FUNCTION

FUNCTION CPP "MeshTrimToSurface"
	SPNG 345
	LPNG 346
	TIP 348
	FCAT  "Mesh"
	FNAME "Mesh Trim to Surface"
END_FUNCTION

FUNCTION CPP "MeshTrimToChains"
	SPNG 522
	LPNG 523
	TIP 524
	FCAT  "Mesh"
	FNAME "Mesh Trim to Chains"
END_FUNCTION

FUNCTION CPP "MeshDecimation"
	SPNG 353
	LPNG 354
	TIP 355
	FCAT  "Mesh"
	FNAME "Mesh Decimation"
END_FUNCTION

FUNCTION CPP "MeshExplodeMesh"
	SPNG 511
	LPNG 512
	TIP 513
	FCAT  "Mesh"
	FNAME "Mesh Explode Mesh"
END_FUNCTION

FUNCTION CPP "MeshCheck"
	SPNG 566
	LPNG 567
	TIP 568
	FCAT  "Mesh"
	FNAME "Check Mesh"
END_FUNCTION

FUNCTION CPP "MeshSmoothArea"
	SPNG 557
	LPNG 558
	TIP 559
	FCAT  "Mesh"
	FNAME "Mesh Smooth Area"
END_FUNCTION

FUNCTION CPP "MeshSmoothHoleEdges"
	SPNG 553
	LPNG 554
	TIP 555
	FCAT  "Mesh"
	FNAME "Mesh Smooth Free Edges"
END_FUNCTION

FUNCTION CPP "MeshRefine"
	SPNG 357
	LPNG 358
	TIP 360
	FCAT  "Mesh"
	FNAME "Mesh Refine"
END_FUNCTION

FUNCTION CPP "MeshFillHoles"
	SPNG 374
	LPNG 375
	TIP 371
	FCAT  "Mesh"
	FNAME "Mesh Fill Holes"
END_FUNCTION

FUNCTION CPP "MeshModifyFacetColor"
	SPNG 385
	LPNG 386
	TIP 387
	FCAT  "Mesh"
	FNAME "Mesh Change Facet Color"
END_FUNCTION

FUNCTION CPP "MeshModifyFacets"
	SPNG 572
	LPNG 573
	TIP 575
	FCAT  "Mesh"
	FNAME "Modify Mesh Facets"
END_FUNCTION

FUNCTION CPP "MeshOffset"
	SPNG 412
	LPNG 413
	TIP 411
	FCAT  "Mesh"
	FNAME "Mesh Offset"
END_FUNCTION

FUNC_DLL "MCCAD.DLL"
RES_DLL  "MCCADRES.DLL"

FUNCTION CPP "MeshFromEntities"
	SPNG 10449
	LPNG 10450
	TIP 22096
	FCAT  "Mesh"
	FNAME "Mesh From Entities"
END_FUNCTION

# FILE ////////////////////////////////////////////////////////////////////

FUNC_DLL "EXE"
RES_DLL  "OPMANRES.DLL"
CATEGORY 3346

FUNCTION WIN "OnFileNew"
	WINCMD 0xE100
	SPNG 5617
	LPNG 5618
	TIP 4019
	FCAT  "File"
	FNAME "New"
END_FUNCTION

FUNCTION WIN "OnFileOpen"
	WINCMD 0xE101
	SPNG 5619
	LPNG 5620
	TIP 4020
	FCAT  "File"
	FNAME "Open"
END_FUNCTION

FUNCTION WIN "OnFileSave"
	WINCMD 0xE103
	SPNG 5621
	LPNG 5622
	TIP 4021
	FCAT  "File"
	FNAME "Save"
END_FUNCTION

FUNCTION CPP "OnFilePrint"
	SPNG 5623
	LPNG 5624
	TIP 4023
	FCAT  "File"
	FNAME "Print"
END_FUNCTION

FUNCTION WIN "OnFileExit"
	HIDDEN
	WINCMD 0xE141
	TIP 4026
	SPNG 5627
	LPNG 5628
	FCAT  "File"
	FNAME "Exit"
END_FUNCTION

FUNCTION CPP "OpenExternal"
	TIP 33098
	SPNG 5629
	LPNG 5630
	FCAT  "File"
	FNAME "Open in Editor"
END_FUNCTION

FUNCTION WIN "OnFileSaveAs"
	WINCMD 0xE104
	TIP 4022
	SPNG 5631
	LPNG 5632
	FCAT  "File"
	FNAME "Save As"
END_FUNCTION

FUNCTION CPP "SaveSome"
	SPNG 5633
	LPNG 5634
	TIP 33092
	FCAT  "File"
	FNAME "Save Some"
END_FUNCTION

FUNCTION CPP "FileProperties"
	HIDDEN
	SPNG 5635
	LPNG 5636
	TIP 32974
	FCAT  "File"
	FNAME "Properties"
END_FUNCTION

FUNCTION CPP "run_user_app"
	CALL_FUNC "run_user_app"
	PARAM 0
	SPNG 5637
	LPNG 5638
	TIP 33001
	FCAT  "File"
	FNAME "Run Add-In"
END_FUNCTION

FUNCTION CPP "run_user_add_in"
	CALL_FUNC "run_user_app"
	PARAM 1
	SPNG 60239
	LPNG 60240
	TIP 33002
	FCAT  "File"
	FNAME "Run User Add-In"
END_FUNCTION

FUNCTION CPP "OnUserAddInPathConfiguration"
	SPNG 60241
	LPNG 60242
	TIP 33003
	FCAT  "File"
	FNAME "Add-In File Path Setting"
END_FUNCTION

FUNCTION CPP "ImportDir"
	FUNC_DLL "MCCORE.DLL"
	CALL_FUNC "ImportExportDir"
	PARAM 0
	SPNG 5639
	LPNG 5640
	TIP 32972
	FCAT  "File"
	FNAME "Import Folder"
END_FUNCTION

FUNCTION CPP "ExportDir"
	FUNC_DLL "MCCORE.DLL"
	CALL_FUNC "ImportExportDir"
	PARAM 1
	SPNG 5641
	LPNG 5642
	TIP 32973
	FCAT  "File"
	FNAME "Export Folder"
END_FUNCTION

FUNCTION CPP "OnOpenUserData"
	SPNG 5643
	LPNG 5644
	TIP 57610
	FCAT  "File"
	FNAME "Open User Folder"
END_FUNCTION

FUNCTION CPP "OnOpenSharedData"
	SPNG 5645
	LPNG 5646
	TIP 57611
	FCAT  "File"
	FNAME "Open Shared Folder"
END_FUNCTION

FUNCTION CPP "UpdateFolder"
	FUNC_DLL "MCCORE.DLL"
	CALL_FUNC "UpdateFolder"
	SPNG 5649
	LPNG 5650
	TIP 33440
	FCAT  "File"
	FNAME "Update Folder"
END_FUNCTION

FUNCTION CPP "ZipToGoWizard"
	FUNC_DLL "MCCORE.DLL"
	RES_DLL "MCCORERES.DLL"
	CALL_FUNC "CreateZipToGoWizard"
	SPNG 10599
	LPNG 10600
	TIP 632
	FCAT  "File"
	FNAME "ZipToGo Wizard"
END_FUNCTION

FUNCTION CPP "InstallContentFiles"
	FUNC_DLL "MCCORE.DLL"
	CALL_FUNC "InstallContentFiles"
	HIDDEN
	FCAT  "Hidden"
	FNAME "Install Content Files"
END_FUNCTION

FUNC_DLL "MCCADUTIL.DLL"
RES_DLL  "MCCADUtilRes.DLL"

FUNCTION CPP "DoPattern"
	TIP 33012
	SPNG 6283
	LPNG 6284
	FCAT  "File"
	FNAME "Merge/Pattern"
END_FUNCTION

FUNC_DLL "MCCORE.DLL"
RES_DLL  "MCCORERES.DLL"

FUNCTION CPP "AutoSaveParams"
	SPNG 10417
	LPNG 10418
	TIP 2942
	FCAT  "File"
	FNAME "Autosave Parameters"
END_FUNCTION

FUNCTION CPP "ProjectManager"
	FUNC_DLL "MCMachineDef.DLL"
	RES_DLL  "MCMachineDefRes.DLL"
	SPNG 2394
	LPNG 2395
	TIP 2103
	FCAT  "File"
	FNAME "Project Manager"
END_FUNCTION

FUNC_DLL "APPS\MCFileUpdateTracking.dll"
RES_DLL  "MCFileUpdateTrackingRes.dll"


FUNCTION CPP "ChangeRecognition_EntryPoint"
	SPNG 141
	LPNG 142
	TIP 2001
	FCAT  "File"
	FNAME "Change Recognition"
END_FUNCTION

FUNCTION CPP "FileTracking_Dialog"
	SPNG 143
	LPNG 144
	TIP 2002
	FCAT  "File"
	FNAME "Tracking Options"
END_FUNCTION

FUNCTION CPP "FileTracking_Check"
	SPNG 145
	LPNG 146
	TIP 2004
	FCAT  "File"
	FNAME "Check All Tracked Files"
END_FUNCTION

FUNCTION CPP "FileTracking_CheckCurrentFile"
	SPNG 147
	LPNG 148
	TIP 2003
	FCAT  "File"
	FNAME "Check Current File"
END_FUNCTION


# General Selection ////////////////////////////////////////////////////////////////////

FUNC_DLL "EXE"
RES_DLL  "OPMANRES.DLL"
CATEGORY 3347

FUNCTION CPP "GSInvertSelection"
	UICALLBACK "OnUpdateGSInvertSelection"
	SPNG 5653
	LPNG 5654
	TIP 1918
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Invert Selection"
END_FUNCTION

FUNCTION CPP "GSSelStandard"
	CALL_FUNC "GSSelLockMode"
	PARAM 0
	UICALLBACK "OnUpdateGSSelLockMode"
	SPNG 5655
	LPNG 5656
	TIP 1911
	INLINE
	FCAT  "General Selection"
	FNAME "Standard Selection"
END_FUNCTION

FUNCTION CPP "GSSelChain"
	CALL_FUNC "GSSelLockMode"
	PARAM 1
	UICALLBACK "OnUpdateGSSelLockMode"
	SPNG 5657
	LPNG 5658
	TIP 1905
	RIGHT_MOUSE
	INLINE
	FCAT  "General Selection"
	FNAME "Chain Selection"
END_FUNCTION

FUNCTION CPP "GSSelWindow"
	CALL_FUNC "GSSelLockMode"
	PARAM 2
	UICALLBACK "OnUpdateGSSelLockMode"
	SPNG 5659
	LPNG 5660
	TIP 1906
	RIGHT_MOUSE
	INLINE
	FCAT  "General Selection"
	FNAME "Window Selection"
END_FUNCTION

FUNCTION CPP "GSSelPolygon"
	CALL_FUNC "GSSelLockMode"
	PARAM 3
	UICALLBACK "OnUpdateGSSelLockMode"
	SPNG 5661
	LPNG 5662
	TIP 1907
	RIGHT_MOUSE
	INLINE
	FCAT  "General Selection"
	FNAME "Polygon Selection"
END_FUNCTION

FUNCTION CPP "GSSelSingle"
	CALL_FUNC "GSSelLockMode"
	PARAM 4
	UICALLBACK "OnUpdateGSSelLockMode"
	SPNG 5663
	LPNG 5664
	TIP 1908
	RIGHT_MOUSE
	INLINE
	FCAT  "General Selection"
	FNAME "Single Selection"
END_FUNCTION

FUNCTION CPP "GSSelArea"
	CALL_FUNC "GSSelLockMode"
	PARAM 5
	UICALLBACK "OnUpdateGSSelLockMode"
	SPNG 5665
	LPNG 5666
	TIP 1909
	RIGHT_MOUSE
	INLINE
	FCAT  "General Selection"
	FNAME "Area Selection"
END_FUNCTION

FUNCTION CPP "GSSelVector"
	CALL_FUNC "GSSelLockMode"
	PARAM 6
	UICALLBACK "OnUpdateGSSelLockMode"
	SPNG 5667
	LPNG 5668
	TIP 1910
	RIGHT_MOUSE
	INLINE
	FCAT  "General Selection"
	FNAME "Vector Selection"
END_FUNCTION

FUNCTION CPP "GSSelFreehand"
	CALL_FUNC "GSSelLockMode"
	PARAM 7
	UICALLBACK "OnUpdateGSSelLockMode"
	SPNG 5713
	LPNG 5714
	TIP 2030
	RIGHT_MOUSE
	INLINE
	FCAT  "General Selection"
	FNAME "Freehand Selection"
END_FUNCTION

FUNCTION CPP "GSSelectionWindow"
	CALL_FUNC "GSSelectionWindowMode"
	PARAM 0
	SPNG 5655
	LPNG 5656
	TIP 1911
	INLINE
	FCAT  "General Selection"
	FNAME "Standard Selection"
END_FUNCTION

FUNCTION CPP "GSSelectionModeIn"
	CALL_FUNC "GSSelectionWindowMode"
	PARAM 1
	SPNG 6438
	LPNG 6439
	TIP 1557
	RIGHT_MOUSE
	INLINE
	FCAT  "General Selection"
	FNAME "Selection Mode In"
END_FUNCTION

FUNCTION CPP "GSSelectionModeInPlus"
	CALL_FUNC "GSSelectionWindowMode"
	PARAM 2
	SPNG 6440
	LPNG 6441
	TIP 1559
	RIGHT_MOUSE
	INLINE
	FCAT  "General Selection"
	FNAME "Selection Mode In Plus"
END_FUNCTION

FUNCTION CPP "GSSelectionModeIntersect"
	CALL_FUNC "GSSelectionWindowMode"
	PARAM 3
	SPNG 6442
	LPNG 6443
	TIP 1561
	RIGHT_MOUSE
	INLINE
	FCAT  "General Selection"
	FNAME "Selection Mode Intersect"
END_FUNCTION

FUNCTION CPP "GSSelectionModeOutPlus"
	CALL_FUNC "GSSelectionWindowMode"
	PARAM 4
	SPNG 6448
	LPNG 6449
	TIP 1560
	RIGHT_MOUSE
	INLINE
	FCAT  "General Selection"
	FNAME "Selection Mode Out Plus"
END_FUNCTION

FUNCTION CPP "GSSelectionModeOut"
	CALL_FUNC "GSSelectionWindowMode"
	PARAM 5
	SPNG 6446
	LPNG 6447
	TIP 1558
	RIGHT_MOUSE
	INLINE
	FCAT  "General Selection"
	FNAME "Selection Mode Out"
END_FUNCTION

FUNCTION CPP "GSACTmpCtrPnt"
	UICALLBACK "OnUpdateGSACTmpCtrPnt"
	SPNG 5805
	LPNG 5806
	TIP 2916
	INLINE
	FCAT  "General Selection"
	FNAME "Mark Center"
END_FUNCTION

FUNCTION CPP "GSUnSelectAll"
	UICALLBACK "OnUpdateGSUnSelectAll"
	SPNG 5669
	LPNG 5670
	TIP 1912
	INLINE
	FCAT  "General Selection"
	FNAME "Unselect All"
END_FUNCTION

FUNCTION CPP "GSEndSelection"
	UICALLBACK "OnUpdateGSEndSelection"
	SPNG 5671
	LPNG 5672
	TIP 1913
	INLINE
	FCAT  "General Selection"
	FNAME "End Selection"
END_FUNCTION

FUNCTION CPP "GSSolidActivate"
	UICALLBACK "OnUpdateGSSolidActivate"
	SPNG 5673
	LPNG 5674
	TIP 1914
	INLINE
	FCAT  "General Selection"
	FNAME "Activate Solid Selection"
END_FUNCTION

FUNCTION CPP "GSSolidEdge"
	UICALLBACK "OnUpdateGSSolidEdge"
	SPNG 5675
	LPNG 5676
	TIP 1915
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Select Edge"
END_FUNCTION

FUNCTION CPP "GSSolidFace"
	UICALLBACK "OnUpdateGSSolidFace"
	SPNG 5677
	LPNG 5678
	TIP 1916
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Select Face"
END_FUNCTION

FUNCTION CPP "GSSolidBody"
	UICALLBACK "OnUpdateGSSolidBody"
	SPNG 5679
	LPNG 5680
	TIP 1917
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Select Body"
END_FUNCTION

FUNCTION CPP "QuickMaskPoints"
	PARAM 0
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5681
	LPNG 5682
	TIP 1919
	RIGHT_MOUSE
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Points"
END_FUNCTION

FUNCTION CPP "QuickMaskPointsOnly"
	CALL_FUNC "QuickMaskPoints"
	PARAM 1
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5681
	LPNG 5682
	TIP 2011
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Points Only"
END_FUNCTION

FUNCTION CPP "QuickMaskPointsAll"
	CALL_FUNC "QuickMaskPoints"
	PARAM 2
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5681
	LPNG 5682
	TIP 2022
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Points All"
END_FUNCTION

FUNCTION CPP "QuickMaskLines"
	PARAM 0
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5683
	LPNG 5684
	TIP 1920
	RIGHT_MOUSE
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Lines"
END_FUNCTION

FUNCTION CPP "QuickMaskLinesOnly"
	CALL_FUNC "QuickMaskLines"
	PARAM 1
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5683
	LPNG 5684
	TIP 2010
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Lines Only"
END_FUNCTION

FUNCTION CPP "QuickMaskLinesAll"
	CALL_FUNC "QuickMaskLines"
	PARAM 2
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5683
	LPNG 5684
	TIP 2021
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Lines All"
END_FUNCTION

FUNCTION CPP "QuickMaskArcs"
	PARAM 0
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5685
	LPNG 5686
	TIP 1921
	RIGHT_MOUSE
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Arcs"
END_FUNCTION

FUNCTION CPP "QuickMaskArcsOnly"
	CALL_FUNC "QuickMaskArcs"
	PARAM 1
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5685
	LPNG 5686
	TIP 1933
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Arcs Only"
END_FUNCTION

FUNCTION CPP "QuickMaskArcsAll"
	CALL_FUNC "QuickMaskArcs"
	PARAM 2
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5685
	LPNG 5686
	TIP 2017
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Arcs All"
END_FUNCTION

FUNCTION CPP "QuickMaskSplines"
	PARAM 0
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5687
	LPNG 5688
	TIP 1922
	RIGHT_MOUSE
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Splines"
END_FUNCTION

FUNCTION CPP "QuickMaskSplinesOnly"
	CALL_FUNC "QuickMaskSplines"
	PARAM 1
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5687
	LPNG 5688
	TIP 2013
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Splines Only"
END_FUNCTION

FUNCTION CPP "QuickMaskSplinesAll"
	CALL_FUNC "QuickMaskSplines"
	PARAM 2
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5687
	LPNG 5688
	TIP 2024
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Splines All"
END_FUNCTION

FUNCTION CPP "QuickMaskSurfaceCurves"
	PARAM 0
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5689
	LPNG 5690
	TIP 1923
	RIGHT_MOUSE
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Surface Curves"
END_FUNCTION

FUNCTION CPP "QuickMaskSurfaceCurvesOnly"
	CALL_FUNC "QuickMaskSurfaceCurves"
	PARAM 1
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5689
	LPNG 5690
	TIP 2014
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Surface Curves Only"
END_FUNCTION

FUNCTION CPP "QuickMaskSurfaceCurvesAll"
	CALL_FUNC "QuickMaskSurfaceCurves"
	PARAM 2
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5689
	LPNG 5690
	TIP 2025
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Surface Curves All"
END_FUNCTION

FUNCTION CPP "QuickMaskSurfaces"
	PARAM 0
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5691
	LPNG 5692
	TIP 1924
	RIGHT_MOUSE
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Surfaces"
END_FUNCTION

FUNCTION CPP "QuickMaskSurfacesOnly"
	CALL_FUNC "QuickMaskSurfaces"
	PARAM 1
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5691
	LPNG 5692
	TIP 2015
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Surfaces Only"
END_FUNCTION

FUNCTION CPP "QuickMaskSurfacesAll"
	CALL_FUNC "QuickMaskSurfaces"
	PARAM 2
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5691
	LPNG 5692
	TIP 2026
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Surfaces All"
END_FUNCTION

FUNCTION CPP "QuickMaskDrafting"
	PARAM 0
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5693
	LPNG 5694
	TIP 1925
	RIGHT_MOUSE
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Drafting"
END_FUNCTION

FUNCTION CPP "QuickMaskDraftingOnly"
	CALL_FUNC "QuickMaskDrafting"
	PARAM 1
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5693
	LPNG 5694
	TIP 1953
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Drafting Only"
END_FUNCTION

FUNCTION CPP "QuickMaskDraftingAll"
	CALL_FUNC "QuickMaskDrafting"
	PARAM 2
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5693
	LPNG 5694
	TIP 2019
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Drafting All"
END_FUNCTION

FUNCTION CPP "QuickMaskPolygonalMeshes"
	PARAM 0
	UICALLBACK "OnUpdateQuickMask"
	SPNG 6457
	LPNG 6458
	TIP 59395
	RIGHT_MOUSE
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Polygonal Meshes"
END_FUNCTION

FUNCTION CPP "QuickMaskPolygonalMeshesOnly"
	CALL_FUNC "QuickMaskPolygonalMeshes"
	PARAM 1
	UICALLBACK "OnUpdateQuickMask"
	SPNG 6457
	LPNG 6458
	TIP 59400
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Polygonal Meshes Only"
END_FUNCTION

FUNCTION CPP "QuickMaskPolygonalMeshesAll"
	CALL_FUNC "QuickMaskPolygonalMeshes"
	PARAM 2
	UICALLBACK "OnUpdateQuickMask"
	SPNG 6457
	LPNG 6458
	TIP 59401
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Polygonal Meshes All"
END_FUNCTION

FUNCTION CPP "QuickMaskSolid"
	PARAM 0
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5695
	LPNG 5696
	TIP 1926
	RIGHT_MOUSE
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Solid"
END_FUNCTION

FUNCTION CPP "QuickMaskSolidOnly"
	CALL_FUNC "QuickMaskSolid"
	PARAM 1
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5695
	LPNG 5696
	TIP 2012
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Solid Only"
END_FUNCTION

FUNCTION CPP "QuickMaskSolidAll"
	CALL_FUNC "QuickMaskSolid"
	PARAM 2
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5695
	LPNG 5696
	TIP 2023
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Solid All"
END_FUNCTION

FUNCTION CPP "QuickMaskWireframe"
	PARAM 0
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5697
	LPNG 5698
	TIP 1927
	RIGHT_MOUSE
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Wireframe"
END_FUNCTION

FUNCTION CPP "QuickMaskWireframeOnly"
	CALL_FUNC "QuickMaskWireframe"
	PARAM 1
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5697
	LPNG 5698
	TIP 2016
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Wireframe Only"
END_FUNCTION

FUNCTION CPP "QuickMaskWireframeAll"
	CALL_FUNC "QuickMaskWireframe"
	PARAM 2
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5697
	LPNG 5698
	TIP 2027
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Wireframe All"
END_FUNCTION

FUNCTION CPP "QuickMaskColor"
	PARAM 0
	UICALLBACK "OnUpdateQuickMask"
	SPNG 6622
	LPNG 6623
	TIP 1928
	RIGHT_MOUSE
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Color"
END_FUNCTION

FUNCTION CPP "QuickMaskColorOnly"
	CALL_FUNC "QuickMaskColor"
	PARAM 1
	UICALLBACK "OnUpdateQuickMask"
	SPNG 6622
	LPNG 6623
	TIP 1934
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Color Only"
END_FUNCTION

FUNCTION CPP "QuickMaskColorAll"
	CALL_FUNC "QuickMaskColor"
	PARAM 2
	UICALLBACK "OnUpdateQuickMask"
	SPNG 6622
	LPNG 6623
	TIP 2018
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Color All"
END_FUNCTION

FUNCTION CPP "QuickMaskLevel"
	PARAM 0
	UICALLBACK "OnUpdateQuickMask"
	SPNG 6624
	LPNG 6625
	TIP 1929
	RIGHT_MOUSE
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Level"
END_FUNCTION

FUNCTION CPP "QuickMaskLevelOnly"
	CALL_FUNC "QuickMaskLevel"
	PARAM 1
	UICALLBACK "OnUpdateQuickMask"
	SPNG 6624
	LPNG 6625
	TIP 2009
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Level Only"
END_FUNCTION

FUNCTION CPP "QuickMaskLevelAll"
	CALL_FUNC "QuickMaskLevel"
	PARAM 2
	UICALLBACK "OnUpdateQuickMask"
	SPNG 6624
	LPNG 6625
	TIP 2020
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Level All"
END_FUNCTION

FUNCTION CPP "QuickMaskResult"
	PARAM 0
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5703
	LPNG 5704
	TIP 1930
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Result"
END_FUNCTION

FUNCTION CPP "QuickMaskGroup"
	PARAM 0
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5705
	LPNG 5706
	TIP 1931
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Group"
END_FUNCTION

FUNCTION CPP "QuickMaskLast"
	UICALLBACK "OnUpdateQuickMaskLast"
	SPNG 5707
	LPNG 5708
	TIP 1935
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Last"
END_FUNCTION

FUNCTION CPP "QuickMaskNamedGroups"
	UICALLBACK "OnUpdateQuickMask"
	SPNG 5709
	LPNG 5710
	TIP 4205
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Quick Mask Named Group"
END_FUNCTION

FUNCTION CPP "ClearAllMasking"
	UICALLBACK "OnUpdateClearAllMasking"
	SPNG 5711
	LPNG 5712
	TIP 1932
	INLINE
	NOTASK
	FCAT  "General Selection"
	FNAME "Clear All Masking"
END_FUNCTION

FUNC_DLL "MCCORE.DLL"

FUNCTION CPP "SelectOnlyDialog"
	SPNG 6444
	LPNG 6445
	TIP 1580
	INLINE
	FCAT  "General Selection"
	FNAME "Select Only"
END_FUNCTION

FUNCTION CPP "SelectAllDialog"
	SPNG 6436
	LPNG 6437
	TIP 1579
	INLINE
	FCAT  "General Selection"
	FNAME "Select All"
END_FUNCTION

# MCCAD /////////////////////////////////////////////////////////
FUNC_DLL "MCCAD.DLL"
RES_DLL  "MCCADRES.DLL"
CATEGORY 3348

# PRIMITIVES //////////////////////////////////////////////////////////////
FUNCTION CPP "create_cylinder_surface"
	PARAM 0
	CALL_FUNC "create_cylinder"
	SPNG 10437
	LPNG 10438
	TIP 5903
	FCAT  "Geometry"
	FNAME "Cylinder"
END_FUNCTION

FUNCTION CPP "create_cylinder_solid"
	PARAM 1
	CALL_FUNC "create_cylinder"
	SPNG 10437
	LPNG 10438
	TIP 5962
	FCAT  "Geometry"
	FNAME "Solid Cylinder"
END_FUNCTION

FUNCTION CPP "create_cylinder_mesh"
	PARAM 2
	CALL_FUNC "create_cylinder"
	SPNG 1037
	LPNG 1038
	TIP 5980
	FCAT  "Geometry"
	FNAME "Mesh Cylinder"
END_FUNCTION

FUNCTION CPP "create_cone_surface"
	PARAM 0
	CALL_FUNC "create_cone"
	SPNG 10439
	LPNG 10440
	TIP 5912
	FCAT  "Geometry"
	FNAME "Cone"
END_FUNCTION

FUNCTION CPP "create_cone_solid"
	PARAM 1
	CALL_FUNC "create_cone"
	SPNG 10439
	LPNG 10440
	TIP 5993
	FCAT  "Geometry"
	FNAME "Solid Cone"
END_FUNCTION

FUNCTION CPP "create_cone_mesh"
	PARAM 2
	CALL_FUNC "create_cone"
	SPNG 10439
	LPNG 10440
	TIP 5981
	FCAT  "Geometry"
	FNAME "Mesh Cone"
END_FUNCTION

FUNCTION CPP "create_block_surface"
	PARAM 0
	CALL_FUNC "create_block"
	SPNG 10441
	LPNG 10442
	TIP 5916
	FCAT  "Geometry"
	FNAME "Block"
END_FUNCTION

FUNCTION CPP "create_block_solid"
	PARAM 1
	CALL_FUNC "create_block"
	SPNG 10441
	LPNG 10442
	TIP 5994
	FCAT  "Geometry"
	FNAME "Solid Block"
END_FUNCTION

FUNCTION CPP "create_block_mesh"
	PARAM 2
	CALL_FUNC "create_block"
	SPNG 1035
	LPNG 1036
	TIP 5982
	FCAT  "Geometry"
	FNAME "Mesh Block"
END_FUNCTION

FUNCTION CPP "create_sphere_surface"
	PARAM 0
	CALL_FUNC "create_sphere"
	SPNG 10443
	LPNG 10444
	TIP 5920
	FCAT  "Geometry"
	FNAME "Sphere"
END_FUNCTION

FUNCTION CPP "create_sphere_solid"
	PARAM 1
	CALL_FUNC "create_sphere"
	SPNG 10443
	LPNG 10444
	TIP 5995
	FCAT  "Geometry"
	FNAME "Solid Sphere"
END_FUNCTION

FUNCTION CPP "create_sphere_mesh"
	PARAM 2
	CALL_FUNC "create_sphere"
	SPNG 10443
	LPNG 10444
	TIP 5983
	FCAT  "Geometry"
	FNAME "Mesh Sphere"
END_FUNCTION

FUNCTION CPP "create_torus_surface"
	PARAM 0
	CALL_FUNC "create_torus"
	SPNG 10445
	LPNG 10446
	TIP 5923
	FCAT  "Geometry"
	FNAME "Torus"
END_FUNCTION

FUNCTION CPP "create_torus_solid"
	PARAM 1
	CALL_FUNC "create_torus"
	SPNG 10445
	LPNG 10446
	TIP 5996
	FCAT  "Geometry"
	FNAME "Solid Torus"
END_FUNCTION

FUNCTION CPP "create_torus_mesh"
	PARAM 2
	CALL_FUNC "create_torus"
	SPNG 10445
	LPNG 10446
	TIP 5984
	FCAT  "Geometry"
	FNAME "Mesh Torus"
END_FUNCTION

# GEOMETRY ////////////////////////////////////////////////////////////////

FUNC_DLL "MCCAD.DLL"
RES_DLL  "MCCADRES.DLL"
CATEGORY 3348

# SKETCHER //////////////////////////////////////////////////////

FUNCTION CPP "sketcher_line_1"
	SPNG 4680
	LPNG 4681
	TIP 32858
	FCAT  "Geometry"
	FNAME "Line Endpoint"
END_FUNCTION

FUNCTION CPP "create_a_line_Closest"
	SPNG 4682
	LPNG 4683
	TIP 32866
	FCAT  "Geometry"
	FNAME "Line Closest"
END_FUNCTION

FUNCTION CPP "sketcher_line_3"
	SPNG 4684
	LPNG 4685
	TIP 32865
	FCAT  "Geometry"
	FNAME "Line Bisect"
END_FUNCTION

FUNCTION CPP "sketcher_line_4"
	SPNG 4686
	LPNG 4687
	TIP 32864
	FCAT  "Geometry"
	FNAME "Line Perpendicular"
END_FUNCTION

FUNCTION CPP "sketcher_line_5"
	SPNG 4688
	LPNG 4689
	TIP 32861
	FCAT  "Geometry"
	FNAME "Line Parallel"
END_FUNCTION

FUNCTION CPP "sketcher_line_6"
	SPNG 4690
	LPNG 4691
	TIP 100
	FCAT  "Geometry"
	FNAME "Line Tangent Through Point"
END_FUNCTION

FUNCTION CPP "WireframePointPosition"
	CALL_FUNC "WireframePointPosition"
	PARAM 0
	SPNG 4692
	LPNG 4693
	TIP 32875
	FCAT  "Geometry"
	FNAME "Point Position"
END_FUNCTION

FUNCTION CPP "WireframePointDynamic"
	SPNG 4698
	LPNG 4699
	TIP 32879
	FCAT  "Geometry"
	FNAME "Point Dynamic"
END_FUNCTION

FUNCTION CPP "WireframeLineNormalPoint"
	SPNG 1022
	LPNG 1023
	TIP 32402
	FCAT  "Geometry"
	FNAME "Line Normal to Point"
END_FUNCTION

FUNCTION CPP "WireframeLineNormalChain"
	SPNG 1026
	LPNG 1027
	TIP 32403
	FCAT  "Geometry"
	FNAME "Line Normal Along Chain"
END_FUNCTION

FUNCTION CPP "WireframeLineNormalGrid"
	SPNG 1118
	LPNG 1119
	TIP 32404
	FCAT  "Geometry"
	FNAME "Line Normal to Grid"
END_FUNCTION

FUNCTION CPP "WireframePointNodePoints"
	SPNG 4702
	LPNG 4703
	TIP 32877
	FCAT  "Geometry"
	FNAME "Node Points"
END_FUNCTION

FUNCTION CPP "WireframePointSegment"
	SPNG 4704
	LPNG 4705
	TIP 32880
	FCAT  "Geometry"
	FNAME "Point Segment"
END_FUNCTION

FUNCTION CPP "WireframePointEndpoints"
	CALL_FUNC "WireframePointEndpoints"
	PARAM 1
	SPNG 4700
	LPNG 4701
	TIP 3555
	FCAT  "Geometry"
	FNAME "Point Endpoints"
END_FUNCTION

FUNCTION CPP "WireframePointSmallArcs"
	SPNG 4706
	LPNG 4707
	TIP 32886
	FCAT  "Geometry"
	FNAME "Point Small Arcs"
END_FUNCTION

FUNCTION CPP "sketcher_arc_1"
	SPNG 4720
	LPNG 4721
	TIP 32896
	FCAT  "Geometry"
	FNAME "Circle Edge Point"
END_FUNCTION

FUNCTION CPP "sketcher_arc_2"
	SPNG 4758
	LPNG 4759
	TIP 32899
	FCAT  "Geometry"
	FNAME "Circle Center Point"
END_FUNCTION

FUNCTION CPP "sketcher_arc_3"
	SPNG 4712
	LPNG 4713
	TIP 32892
	FCAT  "Geometry"
	FNAME "Arc Polar"
END_FUNCTION

FUNCTION CPP "sketcher_arc_4"
	SPNG 4710
	LPNG 4711
	TIP 32893
	FCAT  "Geometry"
	FNAME "Arc Endpoints"
END_FUNCTION

FUNCTION CPP "sketcher_arc_5"
	SPNG 4708
	LPNG 4709
	TIP 32894
	FCAT  "Geometry"
	FNAME "Arc 3 Points"
END_FUNCTION

FUNCTION CPP "sketcher_arc_6"
	SPNG 4716
	LPNG 4717
	TIP 1160
	FCAT  "Geometry"
	FNAME "Arc Tangent"
END_FUNCTION

FUNCTION CPP "sketcher_arc_7"
	SPNG 4714
	LPNG 4715
	TIP 1161
	FCAT  "Geometry"
	FNAME "Arc Polar Endpoints"
END_FUNCTION

FUNCTION CPP "sketcher_fillet_1"
	SPNG 4734
	LPNG 4735
	TIP 32919
	FCAT  "Geometry"
	FNAME "Fillet Entities"
END_FUNCTION

FUNCTION CPP "sketcher_fillet_2"
	SPNG 4732
	LPNG 4733
	TIP 32915
	FCAT  "Geometry"
	FNAME "Fillet Chain"
END_FUNCTION

FUNCTION CPP "sketcher_chamfer_1"
	SPNG 4724
	LPNG 4725
	TIP 32932
	FCAT  "Geometry"
	FNAME "Chamfer Entities"
END_FUNCTION

FUNCTION CPP "sketcher_chamfer_2"
	SPNG 4722
	LPNG 4723
	TIP 32933
	FCAT  "Geometry"
	FNAME "Chamfer Chain"
END_FUNCTION

FUNCTION CPP "sketcher_spline_1"
	SPNG 4730
	LPNG 4731
	TIP 32911
	FCAT  "Geometry"
	FNAME "Manual Spline"
END_FUNCTION

FUNCTION CPP "sketcher_spline_2"
	SPNG 4726
	LPNG 4727
	TIP 32912
	FCAT  "Geometry"
	FNAME "Automatic Spline"
END_FUNCTION

FUNCTION CPP "sketcher_spline_3"
	SPNG 4736
	LPNG 4737
	TIP 32913
	FCAT  "Geometry"
	FNAME "Spline from Curves"
END_FUNCTION

FUNCTION CPP "sketcher_spline_4"
	SPNG 4728
	LPNG 4729
	TIP 32914
	FCAT  "Geometry"
	FNAME "Blended Spline"
END_FUNCTION

FUNCTION CPP "sketcher_curve_1"
	SPNG 4744
	LPNG 4745
	TIP 1214
	FCAT  "Geometry"
	FNAME "Curve on One Edge"
END_FUNCTION

FUNCTION CPP "sketcher_curve_2"
	SPNG 4738
	LPNG 4739
	TIP 33036
	FCAT  "Geometry"
	FNAME "Constant Parameter Curve"
END_FUNCTION

FUNCTION CPP "sketcher_curve_3"
	SPNG 4750
	LPNG 4751
	TIP 33037
	FCAT  "Geometry"
	FNAME "Flowline Curve"
END_FUNCTION

FUNCTION CPP "sketcher_curve_4"
	SPNG 4748
	LPNG 4749
	TIP 33038
	FCAT  "Geometry"
	FNAME "Dynamic Curve"
END_FUNCTION

FUNCTION CPP "sketcher_curve_5"
	SPNG 4746
	LPNG 4747
	TIP 33039
	FCAT  "Geometry"
	FNAME "Curve Slice"
END_FUNCTION

FUNCTION CPP "WireframeCurveSliceAlongCurve"
	SPNG 464
	LPNG 465
	TIP 466
	FCAT  "Geometry"
	FNAME "Curve Slice Along Curve"
END_FUNCTION

FUNCTION CPP "sketcher_curve_6"
	SPNG 4756
	LPNG 4757
	TIP 33158
	FCAT  "Geometry"
	FNAME "Surface Curve"
END_FUNCTION

FUNCTION CPP "sketcher_curve_7"
	SPNG 4752
	LPNG 4753
	TIP 33041
	FCAT  "Geometry"
	FNAME "Part Line Curve"
END_FUNCTION

FUNCTION CPP "sketcher_curve_8"
	SPNG 5499
	LPNG 5500
	TIP 33040
	FCAT  "Geometry"
	FNAME "Curve at Intersection"
END_FUNCTION

FUNCTION CPP "sketcher_curve_9"
	SPNG 4742
	LPNG 4743
	TIP 1156
	FCAT  "Geometry"
	FNAME "Curve on All Edges"
END_FUNCTION

FUNCTION CPP "WireframeCurveCenter"
	SPNG 4740
	LPNG 4741
	TIP 229
	FCAT  "Geometry"
	FNAME "Curve Center"
END_FUNCTION

#DFR - This will be added back for MC2026
#FUNCTION CPP "WireframeCurveShortestPath"
#	SPNG  0
#	LPNG  0
#	TIP   IDS_CURVE_CENTER
#	FCAT  "Geometry"
#	FNAME "Curve Shortest Path"
#END_FUNCTION

FUNCTION CPP "sketcher_rect"
	SPNG 4754
	LPNG 4755
	TIP 32905
	FCAT  "Geometry"
	FNAME "Rectangle"
END_FUNCTION

FUNCTION CPP "create_rectangle"
	SPNG 10421
	LPNG 10422
	TIP 5843
	FCAT  "Geometry"
	FNAME "Rectangular Shapes"
END_FUNCTION

FUNCTION CPP "create_polygon"
	SPNG 10423
	LPNG 10424
	TIP 5851
	FCAT  "Geometry"
	FNAME "Polygon"
END_FUNCTION

FUNCTION CPP "create_ellipse"
	SPNG 10425
	LPNG 10426
	TIP 5854
	FCAT  "Geometry"
	FNAME "Ellipse"
END_FUNCTION

FUNCTION CPP "create_bbox"
	SPNG 10427
	LPNG 10428
	TIP 5927
	FCAT  "Geometry"
	FNAME "Bounding Box"
END_FUNCTION

FUNCTION CPP "create_letters"
	SPNG 10429
	LPNG 10430
	TIP 6698
	FCAT  "Geometry"
	FNAME "Letters"
END_FUNCTION

FUNCTION CPP "create_spiral"
	SPNG 10433
	LPNG 10434
	TIP 6702
	FCAT  "Geometry"
	FNAME "Spiral"
END_FUNCTION

FUNCTION CPP "create_helix"
	SPNG 10431
	LPNG 10432
	TIP 6705
	FCAT  "Geometry"
	FNAME "Helix"
END_FUNCTION

FUNCTION CPP "OnBoltCircle"
	PARAM 0
	SPNG 10435
	LPNG 10436
	TIP 11177
	FCAT  "Geometry"
	FNAME "Bolt Circle"
END_FUNCTION

FUNCTION CPP "create_SilhouetteBoundary"
	SPNG 1523
	LPNG 1524
	TIP 40021
	FCAT  "Geometry"
	FNAME "Silhouette Boundary"
END_FUNCTION

FUNC_DLL "MCCORE.DLL"

# HELP ////////////////////////////////////////////////////////////////////

FUNC_DLL "EXE"
RES_DLL  "OPMANRES.DLL"
CATEGORY 3349

FUNCTION CPP "OnRegisterMastercamDotCom"
	TIP 33442
	SPNG 4776
	LPNG 4777
	INLINE
	FCAT  "Help"
	FNAME "Register on Mastercam.com"
END_FUNCTION

FUNCTION WIN "OnAppAbout"
	HIDDEN
	WINCMD 0xE140
	SPNG 4760
	LPNG 4761
	TIP 4025
	INLINE
	FCAT  "Help"
	FNAME "About"
END_FUNCTION

FUNCTION CPP "OnHelp"
	TIP 32835
	SPNG 6421
	LPNG 6422
	INLINE
	FCAT  "Help"
	FNAME "Help"
END_FUNCTION

FUNCTION CPP "OnCustomerFeedback"
	TIP 33441
	SPNG 4764
	LPNG 4765
	INLINE
	FCAT  "Help"
	FNAME "Customer Feedback Program"
END_FUNCTION

FUNCTION CPP "OnWhatsNew"
	TIP 32830
	SPNG 4774
	LPNG 4775
	INLINE
	FCAT  "Help"
	FNAME "What's New"
END_FUNCTION

FUNCTION CPP "OnQuickReferenceCard"
	TIP 33527
	SPNG 25013
	LPNG 8747
	INLINE
	FCAT  "Help"
	FNAME "Quick Reference Card"
END_FUNCTION

FUNCTION CPP "OnDisplayResolvedIssues"
	TIP 32841
	SPNG 6635
	LPNG 6636
	INLINE
	FCAT  "Help"
	FNAME "Resolved Issues"
END_FUNCTION

FUNCTION CPP "OnHelpUpdates"
	TIP 32869
	SPNG 4772
	LPNG 4773
	INLINE
	FCAT  "Help"
	FNAME "Check for Mastercam Updates"
END_FUNCTION

FUNCTION CPP "OnTutorials"
	TIP 33525
	SPNG 6453
	LPNG 6454
	INLINE
	FCAT  "Help"
	FNAME "Tutorials"
END_FUNCTION

FUNCTION CPP "OnMyMastercam"
	FUNC_DLL "MCCore.DLL"
	TIP 33663
	SPNG 33606
	LPNG 33607
	INLINE
	NOTASK
	FCAT  "Help"
	FNAME "myMastercam"
END_FUNCTION

FUNCTION CPP "RunProductFeedbackBrowser"
	FUNC_DLL "MCCore.DLL"
	TIP 507
	SPNG 4764
	LPNG 4765
	INLINE
	NOTASK
	HIDDEN
	FCAT  "Help"
	FNAME "Product Feedback"
END_FUNCTION

FUNCTION CPP "OnHelpLicenseInfo"
	TIP 283
	SPNG 4760
	LPNG 4761
	HIDDEN
	FCAT  "Help"
	FNAME "License Info"
END_FUNCTION

FUNCTION CPP "OnMastercamU"
	TIP 33664
	SPNG 8658
	LPNG 8659
	INLINE
	FCAT  "Help"
	FNAME "Mastercam U"
END_FUNCTION

FUNCTION CPP "OnForums"
	TIP 33666
	SPNG 8654
	LPNG 8655
	INLINE
	FCAT  "Help"
	FNAME "Forums"
END_FUNCTION

FUNCTION CPP "OnKnowledgeBase"
	TIP 33667
	SPNG 8656
	LPNG 8657
	INLINE
	FCAT  "Help"
	FNAME "Knowledge Base"
END_FUNCTION


# LATHE GEOMETRY CREATION /////////////////////////////////////////////////////////

FUNC_DLL "MCCAD.DLL"
RES_DLL  "MCCADRES.DLL"
CATEGORY 3907

FUNCTION CPP "MakeReliefGrooves"
	SPNG 5387
	LPNG 5388
	TIP 32849
	FCAT  "Lathe Geometry Creation"
	FNAME "Relief Groove"
END_FUNCTION

FUNC_DLL "MCCAD.DLL"
RES_DLL  "MCCADRES.DLL"
CATEGORY 3907

FUNCTION CPP "create_TurnProfile"
	SPNG 1521
	LPNG 1522
	TIP 40022
	FCAT  "Lathe Geometry Creation"
	FNAME "Turn Profile"
END_FUNCTION


# LATHE TOOLPATHS /////////////////////////////////////////////////////////

FUNC_DLL "MCLATHE.DLL"
RES_DLL  "MCLATHERES.DLL"
CATEGORY 3908

FUNCTION CPP "lathe_thread"
	SPNG 5391
	LPNG 5392
	TIP 32797
	FCAT  "Lathe Toolpaths"
	FNAME "Thread"
END_FUNCTION

FUNCTION CPP "CreateLatheThreadCustom"
	SPNG 5575
	LPNG 5576
	TIP 32837
	FCAT  "Lathe Toolpaths"
	FNAME "Custom Thread"
END_FUNCTION

FUNCTION CPP "CreateLatheBAxisContourTurning"
	SPNG 5605
	LPNG 5606
	TIP 32841
	FCAT  "Lathe Toolpaths"
	FNAME "Lathe B-axis Contour Turning"
END_FUNCTION

FUNCTION CPP "CreateLatheAAxisContourTurning"
	SPNG 5628
	LPNG 5629
	TIP 3
	FCAT  "Lathe Toolpaths"
	FNAME "Lathe A-axis Contour Turning"
END_FUNCTION

FUNCTION CPP "lathe_steadyrest"
	SPNG 5393
	LPNG 5394
	TIP 32798
	FCAT  "Lathe Toolpaths"
	FNAME "Steady Rest"
END_FUNCTION

FUNCTION CPP "lathe_stock_flip"
	SPNG 5395
	LPNG 5396
	TIP 32799
	FCAT  "Lathe Toolpaths"
	FNAME "Stock Flip"
END_FUNCTION

FUNCTION CPP "lathe_stock_xfer"
	SPNG 5397
	LPNG 5398
	TIP 32800
	FCAT  "Lathe Toolpaths"
	FNAME "Stock Transfer"
END_FUNCTION

FUNCTION CPP "lathe_barfeed"
	SPNG 5399
	LPNG 5400
	TIP 32809
	FCAT  "Lathe Toolpaths"
	FNAME "Stock Advance"
END_FUNCTION

FUNCTION CPP "lathe_tailstock"
	SPNG 5401
	LPNG 5402
	TIP 32801
	FCAT  "Lathe Toolpaths"
	FNAME "Tailstock"
END_FUNCTION

FUNCTION CPP "lathe_easy_finish"
	SPNG 5403
	LPNG 5404
	TIP 32803
	FCAT  "Lathe Toolpaths"
	FNAME "Quick Finish"
END_FUNCTION

FUNCTION CPP "lathe_easy_groove"
	SPNG 5405
	LPNG 5406
	TIP 32804
	FCAT  "Lathe Toolpaths"
	FNAME "Quick Groove"
END_FUNCTION

FUNCTION CPP "lathe_easy_rough"
	SPNG 5407
	LPNG 5408
	TIP 32805
	FCAT  "Lathe Toolpaths"
	FNAME "Quick Rough"
END_FUNCTION

FUNCTION CPP "lathe_rough"
	SPNG 5409
	LPNG 5410
	TIP 32806
	FCAT  "Lathe Toolpaths"
	FNAME "Rough"
END_FUNCTION

FUNCTION CPP "lathe_canned_pattern"
	SPNG 5411
	LPNG 5412
	TIP 32807
	FCAT  "Lathe Toolpaths"
	FNAME "Pattern Repeat"
END_FUNCTION

FUNCTION CPP "lathe_nc_point"
	SPNG 5413
	LPNG 5414
	TIP 32808
	FCAT  "Lathe Toolpaths"
	FNAME "Point"
END_FUNCTION

FUNCTION CPP "lathe_finish"
	SPNG 5415
	LPNG 5416
	TIP 32802
	FCAT  "Lathe Toolpaths"
	FNAME "Finish"
END_FUNCTION

FUNCTION CPP "lathe_canned_finish"
	SPNG 5417
	LPNG 5418
	TIP 32810
	FCAT  "Lathe Toolpaths"
	FNAME "Canned Finish"
END_FUNCTION

FUNCTION CPP "lathe_canned_groove"
	SPNG 5419
	LPNG 5420
	TIP 32811
	FCAT  "Lathe Toolpaths"
	FNAME "Canned Groove"
END_FUNCTION

FUNCTION CPP "lathe_canned_rough"
	SPNG 5421
	LPNG 5422
	TIP 32812
	FCAT  "Lathe Toolpaths"
	FNAME "Canned Rough"
END_FUNCTION

FUNCTION CPP "lathe_chuck_clamp"
	SPNG 5423
	LPNG 5424
	TIP 32813
	FCAT  "Lathe Toolpaths"
	FNAME "Chuck"
END_FUNCTION

FUNCTION CPP "lathe_cutoff"
	SPNG 5425
	LPNG 5426
	TIP 32814
	FCAT  "Lathe Toolpaths"
	FNAME "Cutoff"
END_FUNCTION

FUNCTION CPP "lathe_drill"
	SPNG 5427
	LPNG 5428
	TIP 32815
	FCAT  "Lathe Toolpaths"
	FNAME "Drill"
END_FUNCTION

FUNCTION CPP "lathe_face"
	SPNG 5429
	LPNG 5430
	TIP 32816
	FCAT  "Lathe Toolpaths"
	FNAME "Face"
END_FUNCTION

FUNCTION CPP "lathe_groove"
	SPNG 5431
	LPNG 5432
	TIP 32817
	FCAT  "Lathe Toolpaths"
	FNAME "Groove"
END_FUNCTION

FUNCTION CPP "lathe_plunge_turn"
	SPNG 5433
	LPNG 5434
	TIP 32864
	FCAT  "Lathe Toolpaths"
	FNAME "Plunge Turn"
END_FUNCTION

FUNCTION CPP "lathe_dynamic_rough"
	SPNG 5435
	LPNG 5436
	TIP 32886
	FCAT  "Lathe Toolpaths"
	FNAME "Dynamic Rough"
END_FUNCTION

FUNCTION CPP "lathe_contour_rough"
	SPNG 5465
	LPNG 5466
	TIP 32887
	FCAT  "Lathe Toolpaths"
	FNAME "Contour Rough"
END_FUNCTION

FUNCTION CPP "CreateLathePrimeTurning"
	SPNG 6334
	LPNG 6335
	TIP 32904
	FCAT  "Lathe Toolpaths"
	FNAME "PrimeTurning"
END_FUNCTION

FUNCTION CPP "MakeCView"
	SPNG 5437
	LPNG 5438
	TIP 32850
	FCAT  "Lathe Toolpaths"
	FNAME "Cview Utility"
END_FUNCTION

FUNCTION CPP "LatheStockView"
	SPNG 25556
	LPNG 25557
	TIP 32851
	FCAT  "Lathe Toolpaths"
	FNAME "Lathe Stock View"
END_FUNCTION

FUNCTION CPP "MtMiscOpMgr"
	SPNG 5439
	LPNG 5440
	TIP 32879
	FCAT  "Lathe Toolpaths"
	FNAME "Pickoff/Pull/Cutoff (MT)"
END_FUNCTION

FUNCTION CPP "RunAlignToZ"
	RES_DLL  "MCLATHERES.DLL"
	SPNG 25669
	LPNG 25670
	TIP 32888
	FCAT  "Lathe Toolpaths"
	FNAME "Align to Z"
END_FUNCTION

FUNC_DLL "apps\PickoffSetup.dll"
RES_DLL "PickoffSetupRes.dll"
FUNCTION CPP "PickoffSetupEntry"
    SPNG 18049
    LPNG 18050
    TIP 1
	FCAT  "Lathe Toolpaths"
    FNAME "PickOff SetUp"
END_FUNCTION

# MILL-TURN /////////////////////////////////////////////////////////

FUNC_DLL "MCLATHE.DLL"
RES_DLL  "MCLATHERES.DLL"
CATEGORY 3909

FUNCTION CPP "MtPOCO"
	SPNG 5441
	LPNG 5442
	UICALLBACK "OnUpdatePartHandlingToolbar"
	TIP 32880
	FCAT  "Mill-Turn"
	FNAME "Pickoff/Cutoff (MT)"
END_FUNCTION

FUNCTION CPP "MtPickoff"
	SPNG 5443
	LPNG 5444
	UICALLBACK "OnUpdatePartHandlingToolbar"
	TIP 32881
	FCAT  "Mill-Turn"
	FNAME "Pickoff (MT)"
END_FUNCTION

FUNCTION CPP "MtStockPull"
	SPNG 5445
	LPNG 5446
	UICALLBACK "OnUpdatePartHandlingToolbar"
	TIP 32883
	FCAT  "Mill-Turn"
	FNAME "Stock Pull (MT)"
END_FUNCTION

FUNCTION CPP "MtTailstockOps"
	SPNG 6519
	LPNG 6520
	UICALLBACK "OnUpdatePartHandlingToolbar"
	TIP 111
	FCAT  "Mill-Turn"
	FNAME "Tailstock Ops (MT)"
END_FUNCTION

FUNCTION CPP "MtBarFeed"
	SPNG 5447
	LPNG 5448
	TIP 32870
	FCAT  "Mill-Turn"
	FNAME "Bar Feed (MT)"
END_FUNCTION

FUNCTION CPP "MtSpindleGrip"
	SPNG 5449
	LPNG 5450
	TIP 32871
	FCAT  "Mill-Turn"
	FNAME "Spindle Clamping (MT)"
END_FUNCTION

FUNCTION CPP "MtSpindleMove"
	SPNG 5451
	LPNG 5452
	TIP 32872
	FCAT  "Mill-Turn"
	FNAME "Spindle Move (MT)"
END_FUNCTION

FUNCTION CPP "MtSpindleSync"
	SPNG 5453
	LPNG 5454
	TIP 32873
	FCAT  "Mill-Turn"
	FNAME "Spindle Sync (MT)"
END_FUNCTION

FUNCTION CPP "MtTailstock"
	SPNG 5455
	LPNG 5456
	UICALLBACK "OnUpdatePartHandlingToolbar"
	TIP 32876
	FCAT  "Mill-Turn"
	FNAME "Tailstock (MT)"
END_FUNCTION

FUNCTION CPP "MtTurret"
	SPNG 5457
	LPNG 5458
	TIP 32878
	FCAT  "Mill-Turn"
	FNAME "Turret Park (MT)"
END_FUNCTION

FUNCTION CPP "MtCenterPointTp"
	SPNG 5486
	LPNG 5487
	UICALLBACK "OnUpdatePartHandlingToolbar"
	TIP 131
	FCAT  "Mill-Turn"
	FNAME "Center Tool Point (MT)"
END_FUNCTION

FUNCTION CPP "lathe_pinch_turn"
	SPNG 5463
	LPNG 5463
	TIP 32818
	FCAT  "Mill-Turn"
	FNAME "Pinch Turn"
END_FUNCTION

FUNCTION CPP "MTSteadyRest"
	SPNG 5578
	LPNG 5579
	TIP 32906
	FCAT  "Mill-Turn"
	FNAME "Steady Rest (MT)"
END_FUNCTION

FUNCTION CPP "MTSteadyRestPoint"
	SPNG 5580
	LPNG 5581
	TIP 32907
	FCAT  "Mill-Turn"
	FNAME "Steady Rest Point (MT)"
END_FUNCTION



# MACHINE DEFINITION //////////////////////////////////////////////////////

FUNC_DLL "MCCORE.DLL"
RES_DLL  "MCCORERES.DLL"
CATEGORY 7583

FUNCTION CPP "RunMachineDefinitionManager"
	SPNG 10450
	LPNG 10451
	TIP 32930
	FCAT  "Machine Definition"
	FNAME "Machine Definition Manager"
END_FUNCTION

FUNCTION CPP "RunControlDefinitionManager"
	SPNG 10447
	LPNG 10448
	TIP 32931
	FCAT  "Control Definition"
	FNAME "Control Definition Manager"
END_FUNCTION

FUNCTION CPP "RunMillToolManager"
	SPNG 10452
	LPNG 10453
	TIP 32932
	FCAT  "Tool Manager"
	FNAME "Mill Tool Manager"
END_FUNCTION

FUNCTION CPP "RunLatheToolManager"
	SPNG 10454
	LPNG 10455
	TIP 32934
	FCAT  "Tool Manager"
	FNAME "Lathe Tool Manager"
END_FUNCTION

FUNCTION CPP "RunMaterialManager"
	SPNG 10456
	LPNG 10457
	TIP 32936
	FCAT  "Material Manager"
	FNAME "Material Manager"
END_FUNCTION

FUNCTION CPP "CreateMtTooplanes"
	SPNG 10458
	LPNG 10459
	TIP 12113
	FCAT  "Toolplanes"
	FNAME "Toolplanes"
END_FUNCTION


# MULTI SURFACE TOOLPATHS /////////////////////////////////////////////////

FUNC_DLL "MCMSURF.DLL"
RES_DLL  "OPMANRES.DLL"
CATEGORY 3350

FUNCTION CPP "CheckHolder"
	RES_DLL  "MCMSurfRes.dll"
	SPNG 105
	LPNG 106
	TIP 269
	FCAT  "Multi Surface Toolpaths"
	FNAME "Check Holder"
END_FUNCTION

FUNCTION CPP "CheckToolReach"
	RES_DLL  "MCMSurfRes.dll"
	SPNG 1611
	LPNG 1612
	TIP 520
	FCAT  "Multi Surface Toolpaths"
	FNAME "Check Tool Reach"
END_FUNCTION

# MULTI SURFACE FINISH TOOLPATHS ////////////////////////////////

FUNCTION CPP "msurf_parallel_toolbar"
	SPNG 6305
	LPNG 6306
	TIP 33358
	FCAT  "Multi Surface Toolpaths"
	FNAME "Finish Parallel"
END_FUNCTION

FUNCTION CPP "msurf_steep_parallel_toolbar"
	SPNG 6307
	LPNG 6308
	TIP 33359
	FCAT  "Multi Surface Toolpaths"
	FNAME "Finish Parallel Steep"
END_FUNCTION

FUNCTION CPP "msurf_radial_toolbar"
	SPNG 6309
	LPNG 6310
	TIP 33360
	FCAT  "Multi Surface Toolpaths"
	FNAME "Finish Radial"
END_FUNCTION

FUNCTION CPP "msurf_project_toolbar"
	SPNG 6311
	LPNG 6312
	TIP 33361
	FCAT  "Multi Surface Toolpaths"
	FNAME "Finish Project"
END_FUNCTION

FUNCTION CPP "msurf_blend_toolbar"
	SPNG 8700
	LPNG 8701
	TIP 33365
	FCAT  "Multi Surface Toolpaths"
	FNAME "Finish Blend"
END_FUNCTION

FUNCTION CPP "msurf_flowline_toolbar"
	SPNG 6315
	LPNG 6316
	TIP 33362
	FCAT  "Multi Surface Toolpaths"
	FNAME "Finish Flowline"
END_FUNCTION

FUNCTION CPP "msurf_contour_toolbar"
	SPNG 6317
	LPNG 6318
	TIP 33363
	FCAT  "Multi Surface Toolpaths"
	FNAME "Finish Contour"
END_FUNCTION

FUNCTION CPP "msurf_shallow_toolbar"
	SPNG 6319
	LPNG 6320
	TIP 33364
	FCAT  "Multi Surface Toolpaths"
	FNAME "Finish Shallow"
END_FUNCTION

FUNCTION CPP "msurf_pencil_toolbar"
	SPNG 6321
	LPNG 6322
	TIP 33352
	FCAT  "Multi Surface Toolpaths"
	FNAME "Finish Pencil"
END_FUNCTION

FUNCTION CPP "msurf_leftover_toolbar"
	SPNG 6323
	LPNG 6324
	TIP 33353
	FCAT  "Multi Surface Toolpaths"
	FNAME "Finish Leftover"
END_FUNCTION

FUNCTION CPP "msurf_scallop_toolbar"
	SPNG 6325
	LPNG 6326
	TIP 33354
	FCAT  "Multi Surface Toolpaths"
	FNAME "Finish Scallop"
END_FUNCTION

FUNCTION CPP "msurf_radial_1_toolbar"
	SPNG 6327
	LPNG 6328
	TIP 33377
	FCAT  "Multi Surface Toolpaths"
	FNAME "Finish One Surface Radial"
END_FUNCTION

FUNCTION CPP "msurf_project_1_toolbar"
	SPNG 6329
	LPNG 6330
	TIP 33376
	FCAT  "Multi Surface Toolpaths"
	FNAME "Finish One Surface Project"
END_FUNCTION

FUNCTION CPP "msurf_blend_1_toolbar"
	SPNG 6331
	LPNG 6332
	TIP 33374
	FCAT  "Multi Surface Toolpaths"
	FNAME "Finish One Surface Blend"
END_FUNCTION

FUNCTION CPP "msurf_flowline_1_toolbar"
	SPNG 6333
	LPNG 6334
	TIP 33375
	FCAT  "Multi Surface Toolpaths"
	FNAME "Finish One Surface Flowline"
END_FUNCTION

FUNCTION CPP "msurf_contour_1_toolbar"
	SPNG 6335
	LPNG 6336
	TIP 33373
	FCAT  "Multi Surface Toolpaths"
	FNAME "Finish One Surface Contour"
END_FUNCTION

FUNCTION CPP "msurf_steep_parallel_1_toolbar"
	SPNG 6337
	LPNG 6338
	TIP 33407
	FCAT  "Multi Surface Toolpaths"
	FNAME "Finish One Surface Parallel Steep"
END_FUNCTION

FUNCTION CPP "msurf_shallow_1_toolbar"
	SPNG 6339
	LPNG 6340
	TIP 33409
	FCAT  "Multi Surface Toolpaths"
	FNAME "Finish One Surface Shallow"
END_FUNCTION

FUNCTION CPP "msurf_scallop_1_toolbar"
	SPNG 6341
	LPNG 6342
	TIP 33411
	FCAT  "Multi Surface Toolpaths"
	FNAME "Finish One Surface Scallop"
END_FUNCTION

FUNCTION CPP "msurf_leftover_1_toolbar"
	SPNG 6343
	LPNG 6344
	TIP 33413
	FCAT  "Multi Surface Toolpaths"
	FNAME "Finish One Surface Leftover"
END_FUNCTION

FUNCTION CPP "msurf_pencil_1_toolbar"
	SPNG 6345
	LPNG 6346
	TIP 33415
	FCAT  "Multi Surface Toolpaths"
	FNAME "Finish One Surface Pencil"
END_FUNCTION

# MULTI SURFACE ROUGH TOOLPATHS ////////////////////////////////

FUNCTION CPP "msurf_rgh_parallel_1_toolbar"
	SPNG 6347
	LPNG 6348
	TIP 33367
	FCAT  "Multi Surface Toolpaths"
	FNAME "Rough One Surface Parallel"
END_FUNCTION

FUNCTION CPP "msurf_rgh_parallel_toolbar"
	SPNG 6353
	LPNG 6354
	TIP 33093
	FCAT  "Multi Surface Toolpaths"
	FNAME "Rough Parallel"
END_FUNCTION

FUNCTION CPP "msurf_rgh_radial_1_toolbar"
	SPNG 6351
	LPNG 6352
	TIP 33368
	FCAT  "Multi Surface Toolpaths"
	FNAME "Rough One Surface Radial"
END_FUNCTION

FUNCTION CPP "msurf_rgh_radial_toolbar"
	SPNG 6357
	LPNG 6358
	TIP 33094
	FCAT  "Multi Surface Toolpaths"
	FNAME "Rough Radial"
END_FUNCTION

FUNCTION CPP "msurf_rgh_project_1_toolbar"
	SPNG 6349
	LPNG 6350
	TIP 33369
	FCAT  "Multi Surface Toolpaths"
	FNAME "Rough One Surface Project"
END_FUNCTION

FUNCTION CPP "msurf_rgh_project_toolbar"
	SPNG 6355
	LPNG 25075
	TIP 33095
	FCAT  "Multi Surface Toolpaths"
	FNAME "Rough Project"
END_FUNCTION

FUNCTION CPP "msurf_rgh_flowline_1_toolbar"
	SPNG 6359
	LPNG 6360
	TIP 33370
	FCAT  "Multi Surface Toolpaths"
	FNAME "Rough One Surface Flowline"
END_FUNCTION

FUNCTION CPP "msurf_rgh_flowline_toolbar"
	SPNG 6361
	LPNG 6362
	TIP 33096
	FCAT  "Multi Surface Toolpaths"
	FNAME "Rough Flowline"
END_FUNCTION

FUNCTION CPP "msurf_rgh_contour_1_toolbar"
	SPNG 6363
	LPNG 6364
	TIP 33371
	FCAT  "Multi Surface Toolpaths"
	FNAME "Rough One Surface Contour"
END_FUNCTION

FUNCTION CPP "msurf_rgh_contour_toolbar"
	SPNG 6365
	LPNG 6366
	TIP 33097
	FCAT  "Multi Surface Toolpaths"
	FNAME "Rough Contour"
END_FUNCTION

FUNCTION CPP "msurf_restmill_toolbar"
	SPNG 6367
	LPNG 6368
	TIP 33355
	FCAT  "Multi Surface Toolpaths"
	FNAME "Rough Restmill"
END_FUNCTION

FUNCTION CPP "msurf_pocket_toolbar"
	SPNG 6369
	LPNG 6370
	TIP 33356
	FCAT  "Multi Surface Toolpaths"
	FNAME "Rough Pocket"
END_FUNCTION

FUNCTION CPP "msurf_pocket_light_toolbar"
	SPNG 6369
	LPNG 6370
	TIP 33366
	FCAT  "Multi Surface Toolpaths"
	FNAME "Rough Multisurface Pocket"
END_FUNCTION

FUNCTION CPP "msurf_pocket_1_toolbar"
	SPNG 6373
	LPNG 6374
	TIP 33372
	FCAT  "Multi Surface Toolpaths"
	FNAME "Rough One Surface Pocket"
END_FUNCTION

FUNCTION CPP "msurf_plunge_toolbar"
	SPNG 6375
	LPNG 6376
	TIP 33357
	FCAT  "Multi Surface Toolpaths"
	FNAME "Rough Plunge"
END_FUNCTION

FUNCTION CPP "msurf_plunge_1_toolbar"
	SPNG 6377
	LPNG 6378
	TIP 33417
	FCAT  "Multi Surface Toolpaths"
	FNAME "Rough One Surface Plunge"
END_FUNCTION

FUNCTION CPP "msurf_restmill_1_toolbar"
	SPNG 6379
	LPNG 6380
	TIP 33419
	FCAT  "Multi Surface Toolpaths"
	FNAME "Rough One Surface Restmill"
END_FUNCTION


# MULTI SURFACE HMM TOOLPATHS ////////////////////////////////

#FUNCTION CPP "msurf_hmm_toolbar"
#	SBMP  IDB_msurf_hmm_toolbar_16
#	LBMP  IDB_msurf_hmm_toolbar_24
#	TIP   ID_TOOLPATH_MSURF_HMM
#	FCAT  "Multi Surface Toolpaths"
#	FNAME ""
#END_FUNCTION

FUNCTION CPP "msurf_hmm_opti_core_toolbar"
	RES_DLL  "OPMANRES.DLL"
	SPNG 6387
	LPNG 25072
	TIP 4254
	FCAT  "Multi Surface Toolpaths"
	FNAME "OptiCore"
END_FUNCTION

FUNCTION CPP "msurf_hmm_core_rough_toolbar"
	RES_DLL  "OPMANRES.DLL"
	SPNG 6381
	LPNG 25068
	TIP 4245
	FCAT  "Multi Surface Toolpaths"
	FNAME "Core Rough"
END_FUNCTION

FUNCTION CPP "msurf_hmm_waterline_toolbar"
	RES_DLL  "OPMANRES.DLL"
	SPNG 6393
	LPNG 25081
	TIP 4263
	FCAT  "Multi Surface Toolpaths"
	FNAME "Waterline"
END_FUNCTION

FUNCTION CPP "msurf_hmm_scallop_toolbar"
	RES_DLL  "OPMANRES.DLL"
	SPNG 6395
	LPNG 25079
	TIP 4266
	FCAT  "Multi Surface Toolpaths"
	FNAME "Scallop"
END_FUNCTION

FUNCTION CPP "msurf_hmm_horizontal_area_toolbar"
	RES_DLL  "OPMANRES.DLL"
	SPNG 6397
	LPNG 25069
	TIP 4269
	FCAT  "Multi Surface Toolpaths"
	FNAME "Horizontal Area"
END_FUNCTION

FUNCTION CPP "msurf_hmm_raster_toolbar"
	RES_DLL  "OPMANRES.DLL"
	SPNG 6399
	LPNG 25077
	TIP 4272
	FCAT  "Multi Surface Toolpaths"
	FNAME "Raster"
END_FUNCTION

FUNCTION CPP "msurf_hmm_pencil_toolbar"
	RES_DLL  "OPMANRES.DLL"
	SPNG 6401
	LPNG 25074
	TIP 4275
	FCAT  "Multi Surface Toolpaths"
	FNAME "Pencil"
END_FUNCTION

FUNCTION CPP "msurf_hmm_spiral_toolbar"
	RES_DLL  "OPMANRES.DLL"
	SPNG 6403
	LPNG 25080
	TIP 4278
	FCAT  "Multi Surface Toolpaths"
	FNAME "Spiral"
END_FUNCTION

FUNCTION CPP "msurf_hmm_radial_toolbar"
	RES_DLL  "OPMANRES.DLL"
	SPNG 6405
	LPNG 25076
	TIP 4281
	FCAT  "Multi Surface Toolpaths"
	FNAME "Radial"
END_FUNCTION

FUNCTION CPP "msurf_hmm_hybrid_toolbar"
	RES_DLL  "OPMANRES.DLL"
	SPNG 6407
	LPNG 25070
	TIP 4284
	FCAT  "Multi Surface Toolpaths"
	FNAME "Hybrid"
END_FUNCTION

FUNCTION CPP "msurf_hmm_project_toolbar"
	RES_DLL  "OPMANRES.DLL"
	SPNG 6355
	LPNG 25075
	TIP 4507
	FCAT  "Multi Surface Toolpaths"
	FNAME "Project"
END_FUNCTION

FUNCTION CPP "msurf_hmm_blend_toolbar"
	RES_DLL  "OPMANRES.DLL"
	SPNG 6313
	LPNG 28089
	TIP 4509
	FCAT  "Multi Surface Toolpaths"
	FNAME "Blend"
END_FUNCTION

FUNCTION CPP "msurf_hmm_equal_scallop_toolbar"
	RES_DLL  "OPMANRES.DLL"
	SPNG 28088
	LPNG 25082
	TIP 4267
	FCAT  "Multi Surface Toolpaths"
	FNAME "Equal Scallop"
END_FUNCTION

# MULTI SURFACE REFINE TOOLPATH ADVERT. /////////////////////////

#FUNCTION CPP "msurf_refine_toolpath_adv"
#	SBMP  IDB_msurf_refine_toolpath_adv_16
#	LBMP  IDB_msurf_refine_toolpath_adv_24
#	TIP   ID_REFINE_TOOLPATH_ADV
#	FCAT  "Multi Surface Toolpaths"
#	FNAME ""
#END_FUNCTION

# MULTIAXIS TOOLPATH UI ////////////////////////////////////////

FUNC_DLL  "MCUI5AX.DLL"
RES_DLL   "OPMANRES.DLL"
CATEGORY 3351

FUNCTION CPP "multiaxui_toolbar"
 	SPNG 6295
 	LPNG 6296
 	TIP 33384
 	FCAT  "Multi-Axis Toolpaths"
 	FNAME "Multiaxis"
END_FUNCTION

FUNCTION CPP "TriangularToolpathEntry"
	SPNG 6511
	LPNG 25680
	TIP 33612
	FCAT  "Multi-Axis Toolpaths"
	FNAME "TriangularToolpath"
END_FUNCTION

FUNCTION CPP "RoughingToolpathEntry"
	SPNG 6513
	LPNG 25684
	TIP 33613
	FCAT  "Multi-Axis Toolpaths"
	FNAME "RoughingToolpath"
END_FUNCTION

FUNCTION CPP "ConvertTo5axToolpathEntry"
	SPNG 6517
	LPNG 25687
	TIP 33615
	FCAT  "Multi-Axis Toolpaths"
	FNAME "ConvertTo5axToolpath"
END_FUNCTION

FUNCTION CPP "PortExpertToolpathEntry"
	SPNG 6519
	LPNG 25690
	TIP 33616
	FCAT  "Multi-Axis Toolpaths"
	FNAME "PortExpertToolpath"
END_FUNCTION

FUNCTION CPP "BladeExpertToolpathEntry"
	SPNG 6521
	LPNG 25691
	TIP 33617
	FCAT  "Multi-Axis Toolpaths"
	FNAME "BladeExpertToolpath"
END_FUNCTION

FUNCTION CPP "RotaryAdvancedToolpathEntry"
	SPNG 6637
 	LPNG 25692
	TIP 33627
	FCAT  "Multi-Axis Toolpaths"
	FNAME "RotaryAdvancedToolpath"
END_FUNCTION

FUNCTION CPP "DeburrToolpathEntry"
	SPNG 8695
 	LPNG 25693
	TIP 33671
	FCAT  "Multi-Axis Toolpaths"
	FNAME "DeburrToolpath"
END_FUNCTION

FUNCTION CPP "ThreeAxisDeburrToolpathEntry"
	SPNG 8749
	LPNG 25697
	TIP 277
	FCAT "Multi-Axis Toolpaths"
	FNAME "3AxisDeburrToolpath"
END_FUNCTION

FUNCTION CPP "AutomaticRoughingToolpathEntry"
	SPNG 8718
 	LPNG 25685
	TIP 33672
	FCAT  "Multi-Axis Toolpaths"
	FNAME "AutomaticRoughingToolpath"
END_FUNCTION

FUNCTION CPP "UnifiedMultiaxisToolpathEntry"
	SPNG 8726
 	LPNG 25673
	TIP 33706
	FCAT  "Multi-Axis Toolpaths"
	FNAME "UnifiedMultiaxisToolpath"
END_FUNCTION

FUNCTION CPP "SwarfToolpathEntry"
	SPNG 6523
	LPNG 25676
	TIP 33618
	FCAT  "Multi-Axis Toolpaths"
	FNAME "SwarfToolpath"
END_FUNCTION

FUNCTION CPP "Rotary4axEntry"
	SPNG 6525
	LPNG 25688
	TIP 33619
	FCAT  "Multi-Axis Toolpaths"
	FNAME "Rotary4ax"
END_FUNCTION

FUNCTION CPP "Curve5axEntry"
	SPNG 6529
	LPNG 25675
	TIP 33621
	FCAT  "Multi-Axis Toolpaths"
	FNAME "Curve5ax"
END_FUNCTION

FUNCTION CPP "Flow5axEntry"
	SPNG 6533
	LPNG 25681
	TIP 33623
	FCAT  "Multi-Axis Toolpaths"
	FNAME "Flow5ax"
END_FUNCTION

FUNCTION CPP "Msurf5axEntry"
	SPNG 6535
	LPNG 25682
	TIP 33624
	FCAT  "Multi-Axis Toolpaths"
	FNAME "Msurf5ax"
END_FUNCTION

FUNCTION CPP "Port5axEntry"
	SPNG 6537
	LPNG 25683
	TIP 33625
	FCAT  "Multi-Axis Toolpaths"
	FNAME "Port5ax"
END_FUNCTION

FUNCTION CPP "Swarf5axClassicEntry"
	SPNG 6539
	LPNG 25689
	TIP 33626
	FCAT  "Multi-Axis Toolpaths"
	FNAME "Swarf5axClassic"
END_FUNCTION

# SETUP SHEET /////////////////////////////////////////////////////////////

FUNC_DLL "MCCORE.DLL"
RES_DLL  "OPMANRES.DLL"
CATEGORY 171

FUNCTION CPP "setup_sheet"
	SPNG 5994
	LPNG 5995
	TIP 3584
	FCAT  "Utilities"
	FNAME "Setup Sheet"
END_FUNCTION

FUNCTION CPP "imageRIBBON"
	SPNG 5996
	LPNG 5997
	TIP 4145
	INLINE
	FCAT  "Utilities"
	FNAME "Setup Sheet Image Capture"
END_FUNCTION

FUNCTION CPP "imageCLEAR"
	SPNG 5992
	LPNG 5993
	TIP 4146
	INLINE
	FCAT  "Utilities"
	FNAME "Clear Setup Sheet Image List"
END_FUNCTION

# NESTING /////////////////////////////////////////////////////////////////

FUNC_DLL "MCCORE.DLL"
RES_DLL  "OPMANRES.DLL"
CATEGORY 3352

FUNCTION CPP "do_nest_cfg"
	SPNG 5998
	LPNG 5999
	UICALLBACK "OnUpdateNestingToolbar"
	TIP 38029
	FCAT  "Nesting"
	FNAME "Nesting Configuration"
END_FUNCTION

FUNCTION CPP "do_nest_g"
	SPNG 6000
	LPNG 6001
	UICALLBACK "OnUpdateNestingToolbar"
	TIP 38030
	FCAT  "Nesting"
	FNAME "Geometry Nesting"
END_FUNCTION

FUNCTION CPP "do_nest_t"
	SPNG 6010
	LPNG 6011
	UICALLBACK "OnUpdateNestingToolbar"
	TIP 38033
	FCAT  "Nesting"
	FNAME "Toolpath Nesting"
END_FUNCTION

FUNCTION CPP "do_nest_m"
	SPNG 6002
	LPNG 6003
	UICALLBACK "OnUpdateNestingToolbar"
	TIP 38031
	FCAT  "Nesting"
	FNAME "McLink Nesting"
END_FUNCTION

FUNCTION CPP "do_nest_r"
	SPNG 6008
	LPNG 6009
	UICALLBACK "OnUpdateNestingToolbar"
	TIP 38032
	FCAT  "Nesting"
	FNAME "Nesting Report"
END_FUNCTION

# PLANES MANIPULATION //////////////////////////////////////////////////////

FUNC_DLL "EXE"
RES_DLL "OPMANRES.DLL"
CATEGORY 3353

FUNCTION CPP "OnPlanesTop"
	SPNG 4968
	LPNG 4969
	TIP 33241
	INLINE
	FCAT  "Planes"
	FNAME "Top (WCS)"
END_FUNCTION

FUNCTION CPP "OnPlanesFront"
	SPNG 4960
	LPNG 4961
	TIP 33242
	INLINE
	FCAT  "Planes"
	FNAME "Front (WCS)"
END_FUNCTION

FUNCTION CPP "OnPlanesBack"
	SPNG 4956
	LPNG 4957
	TIP 33243
	INLINE
	FCAT  "Planes"
	FNAME "Back (WCS)"
END_FUNCTION

FUNCTION CPP "OnPlanesBottom"
	SPNG 4958
	LPNG 4959
	TIP 33244
	INLINE
	FCAT  "Planes"
	FNAME "Bottom (WCS)"
END_FUNCTION

FUNCTION CPP "OnPlanesSide"
	SPNG 4966
	LPNG 4967
	TIP 33245
	INLINE
	FCAT  "Planes"
	FNAME "Right (WCS)"
END_FUNCTION

FUNCTION CPP "OnPlanesLeft"
	SPNG 4964
	LPNG 4965
	TIP 33246
	INLINE
	FCAT  "Planes"
	FNAME "Left (WCS)"
END_FUNCTION

FUNCTION CPP "OnPlanesIso"
	SPNG 4962
	LPNG 4963
	TIP 33247
	INLINE
	FCAT  "Planes"
	FNAME "Isometric (WCS)"
END_FUNCTION

FUNCTION CPP "OnPlanesIsoRev"
	SPNG 6179
	LPNG 6180
	TIP 6177
	INLINE
	FCAT  "Planes"
	FNAME "Isometric Reverse (WCS)"
END_FUNCTION

FUNCTION CPP "OnPlanesTrimetric"
	SPNG 6181
	LPNG 6182
	TIP 6178
	INLINE
	FCAT  "Planes"
	FNAME "Trimetric (WCS)"
END_FUNCTION

FUNCTION CPP "OnPlanesGeometry"
	SPNG 6038
	LPNG 6039
	TIP 33249
	INLINE
	FCAT  "Planes"
	FNAME "Plane from geometry"
END_FUNCTION

FUNCTION CPP "OnPlanesSolidface"
	SPNG 6042
	LPNG 6043
	TIP 33250
	INLINE
	FCAT  "Planes"
	FNAME "Plane From solid face"
END_FUNCTION

FUNCTION CPP "OnPlanesDynamic"
	SPNG 6040
	LPNG 6041
	TIP 33433
	INLINE
	FCAT  "Planes"
	FNAME "Dynamic plane"
END_FUNCTION

FUNCTION CPP "OnPlanesNormal"
	SPNG 6048
	LPNG 6049
	TIP 33256
	INLINE
	FCAT  "Planes"
	FNAME "Plane From line normal"
END_FUNCTION

FUNCTION CPP "OnPlanesEqualsGView"
	SPNG 6050
	LPNG 6051
	TIP 33252
	INLINE
	FCAT  "Planes"
	FNAME "Plane from gview"
END_FUNCTION

FUNCTION CPP "OnPlanesLathe_XP_ZP"
	SPNG 6054
	LPNG 6055
	TIP 33264
	INLINE
	FCAT  "Planes"
	FNAME "+X+Z"
END_FUNCTION

FUNCTION CPP "OnPlanesLathe_XM_ZP"
	SPNG 6056
	LPNG 6057
	TIP 33265
	INLINE
	FCAT  "Planes"
	FNAME "-X+Z"
END_FUNCTION

FUNCTION CPP "OnPlanesLathe_XP_ZM"
	SPNG 6058
	LPNG 6059
	TIP 33266
	INLINE
	FCAT  "Planes"
	FNAME "+X-Z"
END_FUNCTION

FUNCTION CPP "OnPlanesLathe_XM_ZM"
	SPNG 6060
	LPNG 6061
	TIP 33267
	INLINE
	FCAT  "Planes"
	FNAME "-X-Z"
END_FUNCTION

FUNCTION CPP "OnPlanesLathe_DP_ZP"
	SPNG 6062
	LPNG 6063
	TIP 33268
	INLINE
	FCAT  "Planes"
	FNAME "+D+Z"
END_FUNCTION

FUNCTION CPP "OnPlanesLathe_DM_ZP"
	SPNG 6064
	LPNG 6065
	TIP 33269
	INLINE
	FCAT  "Planes"
	FNAME "-D+Z"
END_FUNCTION

FUNCTION CPP "OnPlanesLathe_DP_ZM"
	SPNG 6066
	LPNG 6067
	TIP 33270
	INLINE
	FCAT  "Planes"
	FNAME "+D-Z"
END_FUNCTION

FUNCTION CPP "OnPlanesLathe_DM_ZM"
	SPNG 6068
	LPNG 6069
	TIP 33271
	INLINE
	FCAT  "Planes"
	FNAME "-D-Z"
END_FUNCTION

FUNCTION CPP "OnPlanesFindBack"
	SPNG 6648
	LPNG 6649
	TIP 6665
	FCAT "Planes"
	FNAME "Find back (WCS)"
END_FUNCTION

FUNCTION CPP "OnPlanesFindBottom"
	SPNG 6650
	LPNG 6651
	TIP 6666
	FCAT "Planes"
	FNAME "Find bottom (WCS)"
END_FUNCTION

FUNCTION CPP "OnPlanesFindFront"
	SPNG 6652
	LPNG 6653
	TIP 6667
	FCAT "Planes"
	FNAME "Find front (WCS)"
END_FUNCTION

FUNCTION CPP "OnPlanesFindGeom"
	SPNG 6654
	LPNG 6655
	TIP 6668
	FCAT "Planes"
	FNAME "Find from geometry"
END_FUNCTION

FUNCTION CPP "OnPlanesFindLeft"
	SPNG 6656
	LPNG 6657
	TIP 6669
	FCAT "Planes"
	FNAME "Find left (WCS)"
END_FUNCTION

FUNCTION CPP "OnPlanesFindAll"
	SPNG 6658
	LPNG 6659
	TIP 6670
	FCAT "Planes"
	FNAME "Select plane from all planes"
END_FUNCTION

FUNCTION CPP "OnPlanesFindSelected"
	SPNG 6658
	LPNG 6659
	TIP 6646
	FCAT "Planes"
	FNAME "Select plane from selected planes"
END_FUNCTION

FUNCTION CPP "OnPlanesFindDisplayed"
	SPNG 6658
	LPNG 6659
	TIP 6647
	FCAT "Planes"
	FNAME "Select plane from displayed planes"
END_FUNCTION

FUNCTION CPP "OnPlanesFindRight"
	SPNG 6660
	LPNG 6661
	TIP 6671
	FCAT "Planes"
	FNAME "Find right (WCS)"
END_FUNCTION

FUNCTION CPP "OnPlanesFindTop"
	SPNG 6662
	LPNG 6663
	TIP 6672
	FCAT "Planes"
	FNAME "Find top (WCS)"
END_FUNCTION

FUNCTION CPP "OnPlanesQuickCplane"
	SPNG 6711
	LPNG 6712
	TIP 6626
	INLINE
	FCAT "Planes"
	FNAME "Quick Cplane"
END_FUNCTION

# ROUTER CREATE ///////////////////////////////////////////////////////////

FUNC_DLL "MCCAD.DLL"
RES_DLL  "MCCADRES.DLL"
CATEGORY 267

FUNCTION CPP "DoStairDlg"
	SPNG 329
	LPNG 330
	TIP 32779
	FCAT  "Router Creation Utilities"
	FNAME "Stair Geometry"
END_FUNCTION

FUNCTION CPP "DoDoorDlg"
	SPNG 327
	LPNG 328
	TIP 32780
	FCAT  "Router Creation Utilities"
	FNAME "Door Geometry"
END_FUNCTION

FUNC_DLL "MCCADUTIL.DLL"
RES_DLL  "OPMANRES.DLL"

CATEGORY 3347
FUNCTION CPP "DoAutoSync"
	SPNG 6076
	LPNG 6077
	TIP 33108
	FCAT  "Geometry"
	FNAME "Autosync Rails"
END_FUNCTION

# SCREEN //////////////////////////////////////////////////////////////////

FUNC_DLL "EXE"
RES_DLL  "OPMANRES.DLL"
CATEGORY 3354

FUNCTION CPP "ShowAxesIbeam"
	CALL_FUNC "ShowHideAxesIbeam"
	PARAM 1
	INLINE
	HIDDEN
	FCAT  "Hidden"
	FNAME "Show Axes & Ibeam"
END_FUNCTION

FUNCTION CPP "HideAxesIbeam"
	CALL_FUNC "ShowHideAxesIbeam"
	PARAM 0
	INLINE
	HIDDEN
	FCAT  "Hidden"
	FNAME "Hide Axes & Ibeam"
END_FUNCTION

FUNCTION CPP "CaptureScreen"
	CALL_FUNC "CaptureScreen"
	PARAM 0
	INLINE
	HIDDEN
	FCAT  "Hidden"
	FNAME "Capture Screen"
END_FUNCTION

FUNCTION CPP "RecalcLayout"
	CALL_FUNC "RecalcLayout"
	PARAM 0
	INLINE
	HIDDEN
	FCAT  "Hidden"
	FNAME "Recalculate Layout"
END_FUNCTION

FUNCTION CPP "OnHideToolpath"
	HIDDEN
	SPNG 6078
	LPNG 6079
	TIP 33342
	INLINE
	FCAT  "Screen"
	FNAME "Toggle Display of Selected Operations"
END_FUNCTION

FUNCTION CPP "OnHide"
	SPNG 6080
	LPNG 6081
	TIP 33118
	INLINE
	FCAT  "Screen"
	FNAME "Hide Entity"
END_FUNCTION

FUNCTION CPP "OnHideMore"
	SPNG 6082
	LPNG 6083
	TIP 33119
	UICALLBACK "OnUpdateHideMore"
	INLINE
	FCAT  "Screen"
	FNAME "Hide More Entities"
END_FUNCTION

FUNCTION CPP "OnUnhideSome"
	SPNG 6084
	LPNG 6085
	TIP 33120
	UICALLBACK "OnUpdateUnhideSome"
	INLINE
	FCAT  "Screen"
	FNAME "Unhide Some"
END_FUNCTION

FUNCTION CPP "OnScreenGrid"
	SPNG 6086
	LPNG 6087
	TIP 32860
	INLINE
	FCAT  "Screen"
	FNAME "Grid Settings"
END_FUNCTION

FUNCTION CPP "OnScreenRegenerate"
	SPNG 6088
	LPNG 6089
	TIP 33117
	INLINE
	FCAT  "Screen"
	FNAME "Regenerate Display List"
END_FUNCTION

FUNCTION CPP "screen_statistics"
	FUNC_DLL "MCCORE.DLL"
	RES_DLL  "MCCORERES.DLL"
	SPNG 5672
	LPNG 10461
	TIP 33007
	INLINE
	FCAT  "Screen"
	FNAME "Statistics"
END_FUNCTION

FUNCTION CPP "ClearColors"
	TIP 33019
	SPNG 6090
	LPNG 6091
	FCAT  "Screen"
	FNAME "Clear Colors"
END_FUNCTION

FUNCTION CPP "ToClipboard"
	TIP 33091
	SPNG 6092
	LPNG 6093
	INLINE
	FCAT  "Screen"
	FNAME "Copy Image to Clipboard"
END_FUNCTION

FUNCTION CPP "OnDisplayInfo"
	SPNG 6497
	LPNG 6498
	UICALLBACK "OnUpdateDisplayInfo"
	TIP 32840
	INLINE
	FCAT  "Screen"
	FNAME "Show Axes"
END_FUNCTION

FUNCTION CPP "OnToggleShowGrid"
	SPNG 6493
	LPNG 6494
	TIP 349
	UICALLBACK "OnToggleShowGridCallback"
	INLINE
	FCAT  "Screen"
	FNAME "Show Grid"
END_FUNCTION

FUNCTION CPP "OnToggleSnapToGrid"
	SPNG 6495
	LPNG 6496
	TIP 346
	UICALLBACK "OnToggleSnapToGridCallback"
	INLINE
	FCAT  "Screen"
	FNAME "Snap to Grid"
END_FUNCTION

FUNCTION CPP "OnDrawWorldAxesLinesToggle"
	HIDDEN
	SPNG 6497
	LPNG 6498
	TIP 350
	UICALLBACK "OnDrawWorldAxesLinesToggleCallback"
	INLINE
	FCAT  "Screen"
	FNAME "World Axes Toggle"
END_FUNCTION

FUNCTION CPP "OnDrawTPlaneAxesLinesToggle"
	HIDDEN
	SPNG 6497
	LPNG 6498
	TIP 3059
	UICALLBACK "OnDrawTPlaneAxesLinesToggleCallback"
	INLINE
	FCAT  "Screen"
	FNAME "TPlane Axes Toggle"
END_FUNCTION

FUNCTION CPP "OnDrawCPlaneAxesLinesToggle"
	HIDDEN
	SPNG 6497
	LPNG 6498
	TIP 3280
	UICALLBACK "OnDrawCPlaneAxesLinesToggleCallback"
	INLINE
	FCAT  "Screen"
	FNAME "CPlane Axes Toggle"
END_FUNCTION

FUNCTION CPP "OnDrawWCSPlaneAxesLinesToggle"
	HIDDEN
	SPNG 6497
	LPNG 6498
	TIP 3058
	UICALLBACK "OnDrawWCSPlaneAxesLinesToggleCallback"
	INLINE
	FCAT  "Screen"
	FNAME "WCS Axes Toggle"
END_FUNCTION

FUNCTION CPP "OnDrawTPlaneAxesGnomonToggle"
	HIDDEN
	SPNG 6499
	LPNG 6500
	TIP 3059
	UICALLBACK "OnDrawTPlaneAxesGnomonToggleCallback"
	INLINE
	FCAT  "Screen"
	FNAME "TPlane Gnomon Toggle"
END_FUNCTION

FUNCTION CPP "OnDrawCPlaneAxesGnomonToggle"
	HIDDEN
	SPNG 6499
	LPNG 6500
	TIP 3280
	UICALLBACK "OnDrawCPlaneAxesGnomonToggleCallback"
	INLINE
	FCAT  "Screen"
	FNAME "CPlane Gnomon Toggle"
END_FUNCTION

FUNCTION CPP "OnDrawWCSPlaneAxesGnomonToggle"
	HIDDEN
	SPNG 6499
	LPNG 6500
	TIP 3058
	UICALLBACK "OnDrawWCSPlaneAxesGnomonToggleCallback"
	INLINE
	FCAT  "Screen"
	FNAME "WCS Gnomon Toggle"
END_FUNCTION

FUNCTION CPP "OnDrawCTPlaneAxesCornersToggle"
	HIDDEN
	SPNG 6499
	LPNG 6500
	TIP 1643
	UICALLBACK "OnDrawCTPlaneAxesCornersUpdate"
	INLINE
	FCAT  "Screen"
	FNAME "C/T Corners Toggle"
END_FUNCTION

FUNCTION CPP "OnShowPlaneNamesToggle"
	HIDDEN
	SPNG 6499
	LPNG 6500
	TIP 1644
	UICALLBACK "OnShowPlaneNamesUpdate"
	INLINE
	FCAT  "Screen"
	FNAME "Show Plane Names"
END_FUNCTION

FUNCTION CPP "OnUseOriginColorsToggle"
	HIDDEN
	SPNG 6499
	LPNG 6500
	TIP 1644
	UICALLBACK "OnUseOriginColorsUpdate"
	INLINE
	FCAT  "Screen"
	FNAME "Use Origin Colors"
END_FUNCTION

FUNCTION CPP "OnWCSAxesToggle"
	SPNG 6499
	LPNG 6500
	UICALLBACK "OnUpdateWCSAxesToggle"
	TIP 32843
	INLINE
	FCAT  "Screen"
	FNAME "Show Gnomons"
END_FUNCTION

FUNCTION CPP "OnGnomonAlwaysToggle"
	HIDDEN
	SPNG 6499
	LPNG 6500
	TIP 1644
	UICALLBACK "OnGnomonAlwaysUpdate"
	INLINE
	FCAT  "Screen"
	FNAME "Selected Planes"
END_FUNCTION

FUNCTION CPP "OnDisplayArcCenterPts"
	SPNG 6104
	LPNG 6105
	TIP 32849
	UICALLBACK "OnUpdateDisplayArcCenterPts"
	INLINE
	NOTASK
	FCAT  "Screen"
	FNAME "Toggle Arc Center Point Display"
END_FUNCTION

FUNCTION CPP "OnDisplayEndpoints"
	SPNG 33668
	LPNG 33669
	TIP 32872
	UICALLBACK "OnUpdateDisplayEndpoints"
	INLINE
	NOTASK
	FCAT  "Screen"
	FNAME "Toggle Endpoints Display"
END_FUNCTION

FUNCTION CPP "OnGeometryDisplayConfiguration"
	SPNG 60243
	LPNG 60244
	TIP 197
	INLINE
	FCAT  "Screen"
	FNAME "Geometry Display Settings"
END_FUNCTION

FUNCTION CPP "ViewOpManager"
	SPNG 6106
	LPNG 6107
	TIP 32867
	UICALLBACK "UpdateViewOpManager"
	INLINE
	FCAT  "Screen"
	FNAME "Toggle Toolpaths Manager"
END_FUNCTION

FUNCTION CPP "ViewSolidsManager"
	SPNG 6106
	LPNG 6107
	TIP 33548
	UICALLBACK "UpdateViewSolidsManager"
	INLINE
	FCAT  "Screen"
	FNAME "Toggle Solids Manager"
END_FUNCTION

FUNCTION CPP "ViewPlanesManager"
	SPNG 6106
	LPNG 6107
	TIP 33551
	UICALLBACK "UpdateViewPlanesManager"
	INLINE
	FCAT  "Screen"
	FNAME "Toggle Planes Manager"
END_FUNCTION

FUNCTION CPP "OnScreenLevels"
	SPNG 6106
	LPNG 6107
	UICALLBACK "OnUpdateScreenLevels"
	INLINE
	TIP 33085
	FCAT  "Screen"
	FNAME "Toggle Levels Manager"
END_FUNCTION

FUNCTION CPP "run_group_dialog"
	SPNG 6106
	LPNG 6107
	INLINE
	TIP 33082
	FCAT  "Screen"
	FNAME "Toggle Groups Manager"
END_FUNCTION

FUNCTION CPP "ViewRecentFunctionsManager"
	SPNG 6106
	LPNG 6107
	TIP 33553
	UICALLBACK "UpdateViewRecentFunctionsManager"
	INLINE
	FCAT  "Screen"
	FNAME "Toggle Recently Used Functions Manager"
END_FUNCTION

FUNCTION CPP "ChangeWireframeColor"
	CALL_FUNC "ChangeEntityColor"
	PARAM 0
	SPNG 6108
	LPNG 6109
	INLINE
	TIP 3909
	FCAT  "Screen"
	FNAME "Change Wireframe Color"
END_FUNCTION

FUNCTION CPP "ChangeSolidsColor"
	CALL_FUNC "ChangeEntityColor"
	PARAM 1
	SPNG 6108
	LPNG 6109
	INLINE
	TIP 33597
	FCAT  "Screen"
	FNAME "Change Solid Color"
END_FUNCTION

FUNCTION CPP "ChangeSurfacesColor"
	CALL_FUNC "ChangeEntityColor"
	PARAM 2
	SPNG 6108
	LPNG 6109
	INLINE
	TIP 33598
	FCAT  "Screen"
	FNAME "Change Surface Color"
END_FUNCTION

FUNCTION CPP "ChangeSelectedWireframeColor"
	PARAM -1
	SPNG 6639
	LPNG 6640
	INLINE
	TIP 352
	FCAT  "Screen"
	FNAME "Change Selected Wireframe Entity Color"
END_FUNCTION

FUNCTION CPP "ChangeSelectedWireframeColorWithPicker"
	SPNG 6639
	LPNG 6640
	INLINE
	TIP 355
	FCAT  "Screen"
	FNAME "Change Selected Wireframe Entity Color with Color Picker"
END_FUNCTION

FUNCTION CPP "ChangeSelectedSolidsColor"
	PARAM -1
	SPNG 6641
	LPNG 6642
	INLINE
	TIP 354
	FCAT  "Screen"
	FNAME "Change Selected Solid Entity Color"
END_FUNCTION

FUNCTION CPP "ChangeSelectedSolidsColorWithPicker"
	SPNG 6641
	LPNG 6642
	INLINE
	TIP 356
	FCAT  "Screen"
	FNAME "Change Selected Solid Entity Color with Color Picker"
END_FUNCTION

FUNCTION CPP "ChangeSelectedSurfacesColor"
	PARAM -1
	SPNG 6643
	LPNG 6644
	INLINE
	TIP 353
	FCAT  "Screen"
	FNAME "Change Selected Surface Entity Color"
END_FUNCTION

FUNCTION CPP "ChangeSelectedSurfacesColorWithPicker"
	SPNG 6643
	LPNG 6644
	INLINE
	TIP 357
	FCAT  "Screen"
	FNAME "Change Selected Surface Entity Color with Color Picker"
END_FUNCTION

FUNCTION CPP "ChangeSelectedMeshColor"
	PARAM -1
	SPNG 6503
	LPNG 6506
	INLINE
	TIP 544
	FCAT  "Screen"
	FNAME "Change Selected Mesh Entity Color"
END_FUNCTION

FUNCTION CPP "ChangeSelectedMeshColorWithPicker"
	SPNG 6503
	LPNG 6506
	INLINE
	TIP 549
	FCAT  "Screen"
	FNAME "Change Selected Mesh Entity Color with Color Picker"
END_FUNCTION

FUNCTION CPP "ChangeEntityLevel"
	SPNG 6110
	LPNG 6111
	TIP 3925
	INLINE
	FCAT  "Screen"
	FNAME "Change Entity Level"
END_FUNCTION

FUNCTION CPP "ChangeEntityAttribs"
	SPNG 6112
	LPNG 6113
	TIP 3926
	INLINE
	FCAT  "Screen"
	FNAME "Change Entity Attributes"
END_FUNCTION

FUNCTION CPP "ChangeEntityPointStyle"
	SPNG 6114
	LPNG 6115
	TIP 3908
	INLINE
	FCAT  "Screen"
	FNAME "Change Point Style"
END_FUNCTION

FUNCTION CPP "ChangeEntityLineStyle"
	SPNG 6116
	LPNG 6117
	TIP 3907
	INLINE
	FCAT  "Screen"
	FNAME "Change Line Style"
END_FUNCTION

FUNCTION CPP "ChangeEntityLineWidth"
	SPNG 6118
	LPNG 6119
	TIP 3906
	INLINE
	FCAT  "Screen"
	FNAME "Change Line Width"
END_FUNCTION

FUNCTION CPP "ChangeSelectedEntityPointStyle"
	PARAM -1
	SPNG 6114
	LPNG 6115
	TIP 358
	INLINE
	FCAT  "Screen"
	FNAME "Change Selected Entity Point Style"
END_FUNCTION

FUNCTION CPP "ChangeSelectedEntityLineStyle"
	PARAM -1
	SPNG 6116
	LPNG 6117
	TIP 359
	INLINE
	FCAT  "Screen"
	FNAME "Change Selected Entity Line Style"
END_FUNCTION

FUNCTION CPP "ChangeSelectedEntityLineWidth"
	PARAM -1
	SPNG 6118
	LPNG 6119
	TIP 365
	INLINE
	FCAT  "Screen"
	FNAME "Change Selected Entity Line Width"
END_FUNCTION

FUNCTION CPP "OnShowToolToggle"
	SPNG 8729
	LPNG 8730
	TIP 8735
	UICALLBACK "OnShowToolToggleCallback"
	INLINE
	FCAT  "Screen"
	FNAME "Show Tool"
END_FUNCTION

FUNCTION CPP "OnShowToolDrawToolToggle"
	HIDDEN
	SPNG 8731
	LPNG 8732
	TIP 8736
	UICALLBACK "OnShowToolDrawToolToggleCallback"
	INLINE
	FCAT  "Screen"
	FNAME "Tool Display Toggle"
END_FUNCTION

FUNCTION CPP "OnShowToolDrawHolderToggle"
	HIDDEN
	SPNG 8733
	LPNG 8734
	TIP 8737
	UICALLBACK "OnShowToolDrawHolderToggleCallback"
	INLINE
	FCAT  "Screen"
	FNAME "Holder Display Toggle"
END_FUNCTION

FUNCTION CPP "OnShowToolDisplayInFrontToggle"
	HIDDEN
	TIP 8740
	UICALLBACK "OnShowToolDisplayInFrontToggleCallback"
	INLINE
	FCAT  "Screen"
	FNAME "Tool Display in Front Toggle"
END_FUNCTION

FUNCTION CPP "OnShowToolSnapToAutoCursorToggle"
	HIDDEN
	TIP 8741
	UICALLBACK "OnShowToolSnapToAutoCursorToggleCallback"
	INLINE
	FCAT  "Screen"
	FNAME "Snap Tool to AutoCursor Positions Toggle"
END_FUNCTION

FUNCTION CPP "OnShowToolDisplayFromSelectedOperationToggle"
	HIDDEN
	TIP 8742
	UICALLBACK "OnShowToolDisplayFromSelectedOperationToggleCallback"
	INLINE
	FCAT  "Screen"
	FNAME "Tool From Selected Operation Toggle"
END_FUNCTION

FUNC_DLL "MCCADUTIL.DLL"
RES_DLL  "MCCADUtilRes.DLL"

FUNCTION CPP "blank_entities"
	SPNG 6120
	LPNG 6121
	TIP 33029
	FCAT  "Screen"
	FNAME "Blank Entity"
END_FUNCTION

FUNCTION CPP "unblank_entities"
	SPNG 6122
	LPNG 6123
	TIP 33030
	FCAT  "Screen"
	FNAME "Un-Blank Entity"
END_FUNCTION

FUNC_DLL "MCCAD.DLL"
RES_DLL  "MCCADRES.DLL"

FUNC_DLL "EXE"
RES_DLL  "OPMANRES.DLL"


# TOOLS ///////////////////////////////////////////////////////////////////

FUNC_DLL "EXE"
RES_DLL  "OPMANRES.DLL"
CATEGORY 3355

FUNCTION CPP "ConfigureX"
	TIP 32890
	SPNG 6128
	LPNG 6129
	FCAT  "Settings"
	FNAME "Configuration"
END_FUNCTION

FUNCTION CPP "Customize"
	TIP 33087
	SPNG 6130
	LPNG 6131
	FCAT  "Settings"
	FNAME "Customize"
END_FUNCTION

FUNCTION CPP "CompactAndRepairFile"
	TIP 3869
	SPNG 6132
	LPNG 6133
	FCAT  "Settings"
	FNAME "Compact and Repair File"
END_FUNCTION

FUNCTION CPP "OnNetHASPLicensing"
	TIP 3870
	SPNG 6134
	LPNG 6135
	FCAT  "Settings"
	FNAME "Network Licensing"
END_FUNCTION

FUNCTION CPP "OnLicenseInfo"
	HIDDEN
	TIP 3870
	FCAT "Settings"
	FNAME "License Information"
END_FUNCTION

FUNCTION CPP "OnEndUserLicenseAgreement"
	HIDDEN
	TIP 3870
	FCAT "Settings"
	FNAME "End User License Agreement"
END_FUNCTION

FUNC_DLL "EXE"
FUNCTION CPP "ReloadCurrentWorkspace"
	HIDDEN
	FCAT  "Hidden"
	FNAME ""
END_FUNCTION

# VIEWSHEETS /////////////////////////////////////////////////////////////////

FUNC_DLL "EXE"
RES_DLL  "OPMANRES.DLL"
CATEGORY 3500

FUNCTION CPP "ToggleWorksheetsEnabled"
	ENABLED F
	UICALLBACK "WorksheetOnOffStatusCheck"
	SPNG 6142
	LPNG 6143
	TIP 4051
	FCAT  "Viewsheets"
	FNAME "Viewsheets Enabled"
END_FUNCTION

FUNCTION CPP "NewWorksheet"
	ENABLED F
	UICALLBACK "AllWorksheetEnabled"
	SPNG 6144
	LPNG 6145
	TIP 4044
	FCAT  "Viewsheets"
	FNAME "Create New Viewsheet"
END_FUNCTION

FUNCTION CPP "CopyCurrentWorksheet"
	ENABLED F
	UICALLBACK "AllWorksheetEnabled"
	SPNG 6146
	LPNG 6147
	TIP 4045
	FCAT  "Viewsheets"
	FNAME "Copy Current Viewsheet"
END_FUNCTION

FUNCTION CPP "RenameCurrentWorksheet"
	ENABLED F
	UICALLBACK "MainWorksheetEnabled"
	SPNG 6148
	LPNG 6149
	TIP 4047
	FCAT  "Viewsheets"
	FNAME "Rename Current Viewsheet"
END_FUNCTION

FUNCTION CPP "DeleteCurrentWorksheet"
	ENABLED F
	UICALLBACK "CanDeleteCurrentViewsheet"
	SPNG 6150
	LPNG 6151
	TIP 4046
	FCAT  "Viewsheets"
	FNAME "Delete Current Viewsheet"
END_FUNCTION

FUNCTION CPP "RestoreCurrentWorksheetBookmark"
	ENABLED F
	UICALLBACK "DoesCurrentWorksheetHaveBookmark"
	SPNG 6152
	LPNG 6153
	TIP 4057
	FCAT  "Viewsheets"
	FNAME "Restore Bookmark"
END_FUNCTION

FUNCTION CPP "SaveCurrentWorksheetBookmark"
	ENABLED F
	UICALLBACK "AllWorksheetEnabled"
	SPNG 6154
	LPNG 6155
	TIP 4055
	FCAT  "Viewsheets"
	FNAME "Save Bookmark"
END_FUNCTION

FUNCTION CPP "ViewsheetGroupOpen"
	HIDDEN
	INLINE
	SPNG 5615
	LPNG 5616
	FCAT  "Viewsheets"
	FNAME "ViewsheetGroupOpen"
END_FUNCTION

FUNCTION CPP "ViewsheetGroupClosed"
	HIDDEN
	INLINE
	SPNG 5613
	LPNG 5614
	FCAT  "Viewsheets"
	FNAME "ViewsheetGroupClosed"
END_FUNCTION

FUNCTION CPP "ConfigureViewsheets"
	HIDDEN
	INLINE
	FCAT  "View"
	FNAME ""
END_FUNCTION

# SHADING /////////////////////////////////////////////////////////////////

FUNC_DLL "EXE"
RES_DLL  "OPMANRES.DLL"
CATEGORY 3356

FUNCTION CPP "OnMeshShowTriangleEdges"
	SPNG 8744
	LPNG 8745
	UICALLBACK "OnUpdateMeshShowTriangleEdges"
	TIP 259
	INLINE
	FCAT  "View"
	FNAME "Mesh Facet Edges"
END_FUNCTION

FUNCTION CPP "onToggleSurfaceBacksideShading"
	TIP 59394
	SPNG 6293
	LPNG 6294
	UICALLBACK "OnUpdateSurfaceBacksideShading"
	INLINE
	FCAT  "View"
	FNAME "Toggle Surface Backside Shading"
END_FUNCTION

FUNCTION CPP "OnStatusDisplayWireAll"
	HIDDEN
	SPNG 6158
	LPNG 6159
	TIP 33126
	UICALLBACK "OnUpdateDisplayWireAll"
	INLINE
	FCAT  "View"
	FNAME "Wireframe"
END_FUNCTION

FUNCTION CPP "OnShadeWire"
	SPNG 6158
	LPNG 6159
	TIP 33126
	INLINE
	FCAT  "View"
	FNAME "Wireframe"
END_FUNCTION

FUNCTION CPP "OnStatusDisplayWireDimmed"
	HIDDEN
	SPNG 6160
	LPNG 6161
	TIP 33127
	UICALLBACK "OnUpdateDisplayWireDimmed"
	INLINE
	FCAT  "View"
	FNAME "Dimmed Wireframe"
END_FUNCTION

FUNCTION CPP "OnShadeWireDimmed"
	SPNG 6160
	LPNG 6161
	TIP 33127
	INLINE
	FCAT  "View"
	FNAME "Dimmed Wireframe"
END_FUNCTION

FUNCTION CPP "OnStatusDisplayWireHidden"
	HIDDEN
	SPNG 6162
	LPNG 6163
	TIP 33128
	UICALLBACK "OnUpdateDisplayWireHidden"
	INLINE
	FCAT  "View"
	FNAME "No Hidden Wireframe"
END_FUNCTION

FUNCTION CPP "OnShadeWireHidden"
	SPNG 6162
	LPNG 6163
	TIP 33128
	INLINE
	FCAT  "View"
	FNAME "No Hidden Wireframe"
END_FUNCTION

FUNCTION CPP "OnStatusDisplayShadedOutlined"
	HIDDEN
	SPNG 6164
	LPNG 6165
	TIP 33129
	UICALLBACK "OnUpdateDisplayShadedOutlined"
	INLINE
	FCAT  "View"
	FNAME "Outline Shaded"
END_FUNCTION

FUNCTION CPP "OnShadeShadedOutline"
	SPNG 6164
	LPNG 6165
	TIP 33129
	INLINE
	FCAT  "View"
	FNAME "Outline Shaded"
END_FUNCTION

FUNCTION CPP "OnStatusDisplayShadedAll"
	HIDDEN
	SPNG 6166
	LPNG 6167
	TIP 33130
	UICALLBACK "OnUpdateDisplayShadedAll"
	INLINE
	FCAT  "View"
	FNAME "Shaded"
END_FUNCTION

FUNCTION CPP "OnShadeShaded"
	SPNG 6166
	LPNG 6167
	TIP 33130
	INLINE
	FCAT  "View"
	FNAME "Shaded"
END_FUNCTION

FUNCTION CPP "ConfigureShading"
	SPNG 7206
	LPNG 7207
	TIP 33131
	INLINE
	FCAT  "View"
	FNAME "Shading Settings"
END_FUNCTION

FUNCTION CPP "OnShadeToggle"
	SPNG 6168
	LPNG 6169
	TIP 33124
	INLINE
	FCAT  "View"
	FNAME "Shading Toggle"
END_FUNCTION

FUNCTION CPP "OnShadeTranslucentToggle"
	SPNG 6170
	LPNG 6171
	UICALLBACK "OnUpdateShadeTranslucentToggle"
	TIP 33133
	INLINE
	FCAT  "View"
	FNAME "Shading Translucency Toggle"
END_FUNCTION

FUNCTION CPP "OnToggleRenderMaterial"
	SPNG 6545
	LPNG 6546
	UICALLBACK "OnUpdateRenderMaterial"
	TIP 423
	INLINE
	FCAT  "View"
	FNAME "Material Rendering Toggle"
END_FUNCTION


FUNCTION CPP "ApplyCurrentMaterialAppearance"
	INLINE
	HIDDEN
	FCAT  "View"
	FNAME "Apply Current Material Appearance"
END_FUNCTION


FUNCTION CPP "ApplyMaterialAppearance"
	INLINE
	HIDDEN
	FCAT  "View"
	FNAME "Apply Material Appearance"
END_FUNCTION


FUNC_DLL "MCLATHE.DLL"
RES_DLL  "MCLATHERES.DLL"

CATEGORY 155

FUNCTION CPP "StockShow"
	SPNG 5461
	LPNG 5462
	UICALLBACK "OnUpdateStockShow"
	TIP 32885
	FCAT  "Stock Model"
	FNAME "Stock Display Toggle"
END_FUNCTION

FUNCTION CPP "StockShade"
	SPNG 5459
	LPNG 5460
	UICALLBACK "OnUpdateStockShade"
	TIP 32884
	FCAT  "Stock Model"
	FNAME "Lathe Stock Shading Toggle"
END_FUNCTION

FUNCTION CPP "ToggleFitStock"
	SPNG 5461
	LPNG 5462
	UICALLBACK "OnUpdateToggleFitStock"
	TIP 145
	FCAT  "Stock Model"
	FNAME "Stock Fit"
END_FUNCTION

FUNCTION CPP "ToggleLatheLeftStockDisplay"
	SPNG 5461
	LPNG 5462
	UICALLBACK "OnUpdateToggleLatheLeftStockDisplay"
	TIP 147
	FCAT  "Stock Model"
	FNAME "Stock Display Toggle Left Stock"
END_FUNCTION

FUNCTION CPP "ToggleLatheLeftChuckDisplay"
	SPNG 5461
	LPNG 5462
	UICALLBACK "OnUpdateToggleLatheLeftChuckDisplay"
	TIP 149
	FCAT  "Stock Model"
	FNAME "Stock Display Toggle Left Chuck"
END_FUNCTION

FUNCTION CPP "ToggleLatheRightStockDisplay"
	SPNG 5461
	LPNG 5462
	UICALLBACK "OnUpdateToggleLatheRightStockDisplay"
	TIP 148
	FCAT  "Stock Model"
	FNAME "Stock Display Toggle Right Stock"
END_FUNCTION

FUNCTION CPP "ToggleLatheRightChuckDisplay"
	SPNG 5461
	LPNG 5462
	UICALLBACK "OnUpdateToggleLatheRightChuckDisplay"
	TIP 150
	FCAT  "Stock Model"
	FNAME "Stock Display Toggle Right Chuck"
END_FUNCTION

FUNCTION CPP "ToggleLatheTailstockDisplay"
	SPNG 5461
	LPNG 5462
	UICALLBACK "OnUpdateToggleLatheTailstockDisplay"
	TIP 152
	FCAT  "Stock Model"
	FNAME "Stock Display Tailstock"
END_FUNCTION

FUNCTION CPP "ToggleLatheSteadyRestDisplay"
	SPNG 5461
	LPNG 5462
	UICALLBACK "OnUpdateToggleLatheSteadyRestDisplay"
	TIP 154
	FCAT  "Stock Model"
	FNAME "Stock Display Toggle Steady Rest"
END_FUNCTION

FUNCTION CPP "ToggleMtCenterDisplay"
	SPNG 5461
	LPNG 5462
	UICALLBACK "OnUpdateToggleMtCenterDisplay"
	TIP 151
	FCAT  "Stock Model"
	FNAME "Stock Display Toggle Center Tool"
END_FUNCTION

# SOLIDS //////////////////////////////////////////////////////////////////

FUNC_DLL "MCGEOMSLD.DLL"
RES_DLL  "OPMANRES.DLL"
CATEGORY 3357

FUNCTION CPP "OnSolidsSelectBack"
	HIDDEN
	SPNG 4557
	LPNG 4558
	UICALLBACK "OnUpdateSolidsSelectBack"
	TIP 32993
	FCAT  "Solids"
	FNAME "Select From Back"
	NOTASK
	INLINE
END_FUNCTION

FUNCTION CPP "OnSolidsSelectLast"
	HIDDEN
	SPNG 4563
	LPNG 4564
	UICALLBACK "OnUpdateSolidsSelectLast"
	TIP 32995
	INLINE
	FCAT  "Solids"
	FNAME "Select Last"
END_FUNCTION

FUNC_DLL "MCGEOMSLD.DLL"
RES_DLL  "MCGEOMSLDRES.DLL"

FUNCTION CPP "sldRegenAll"
	SPNG 1420
	LPNG 1421
	TIP 3256
	FCAT  "Solids"
	FNAME "Regen All"
END_FUNCTION

FUNCTION CPP "sld_newExtrude"
	SPNG 5772
	LPNG 5773
	TIP 32975
	FCAT  "Solids"
	FNAME "Extrude"
END_FUNCTION

FUNCTION CPP "sld_newRevolve"
	SPNG 5774
	LPNG 5775
	TIP 32976
	FCAT  "Solids"
	FNAME "Revolve"
END_FUNCTION

FUNCTION CPP "sld_newSweepV8"
	SPNG 5776
	LPNG 5777
	TIP 32977
	FCAT  "Solids"
	FNAME "Sweep"
END_FUNCTION

FUNCTION CPP "sld_newLoft"
	SPNG 5778
	LPNG 5779
	TIP 32978
	FCAT  "Solids"
	FNAME "Loft"
END_FUNCTION

FUNCTION CPP "sld_do_fillet"
	SPNG 5780
	LPNG 5781
	TIP 32979
	FCAT  "Solids"
	FNAME "Fillet"
END_FUNCTION

FUNCTION CPP "sld_do_variable_fillet"
	SPNG 5782
	LPNG 5783
	TIP 33480
	FCAT  "Solids"
	FNAME "Variable Fillet"
END_FUNCTION

FUNCTION CPP "sld_do_face_face_fillet"
	SPNG 5784
	LPNG 5785
	TIP 33210
	FCAT  "Solids"
	FNAME "Face to Face Fillet"
END_FUNCTION

FUNCTION CPP "sldChamferOneDist"
	CALL_FUNC "sldChamfer"
	PARAM 0
	SPNG 5786
	LPNG 5787
	TIP 33007
	FCAT  "Solids"
	FNAME "One Distance Chamfer"
END_FUNCTION

FUNCTION CPP "sldChamferTwoDist"
	CALL_FUNC "sldChamfer"
	PARAM 1
	SPNG 5788
	LPNG 5789
	TIP 33008
	FCAT  "Solids"
	FNAME "Two Distance Chamfer"
END_FUNCTION

FUNCTION CPP "sldChamferDistAngle"
	CALL_FUNC "sldChamfer"
	PARAM 2
	SPNG 5790
	LPNG 5791
	TIP 33009
	FCAT  "Solids"
	FNAME "Distance and Angle Chamfer"
END_FUNCTION

FUNCTION CPP "sld_do_shell"
	SPNG 5792
	LPNG 5793
	TIP 32981
	FCAT  "Solids"
	FNAME "Shell"
END_FUNCTION

FUNCTION CPP "sld_do_boolean"
	SPNG 5794
	LPNG 5795
	TIP 32982
	FCAT  "Solids"
	FNAME "Boolean"
END_FUNCTION

#FUNCTION CPP "sld_newDraftFace"
#	SBMP  IDB_sld_newDraftFace_16
#	LBMP  IDB_sld_newDraftFace_24
#	TIP   ID_SOLIDS_DRAFTFACES
#	FCAT  "Solids"
#	FNAME "Draft Faces"
#END_FUNCTION

FUNCTION CPP "sld_newDraftFace_0"
	CALL_FUNC "sld_newDraftFace"
	PARAM 0
	SPNG 5797
	LPNG 5798
	TIP 33529
	FCAT  "Solids"
	FNAME "Draft to top face"
END_FUNCTION

FUNCTION CPP "sld_newDraftFace_1"
	CALL_FUNC "sld_newDraftFace"
	PARAM 1
	SPNG 5713
	LPNG 5714
	TIP 33530
	FCAT  "Solids"
	FNAME "Draft to Z plane"
END_FUNCTION

FUNCTION CPP "sld_newDraftFace_2"
	CALL_FUNC "sld_newDraftFace"
	PARAM 2
	SPNG 5715
	LPNG 5716
	TIP 33531
	FCAT  "Solids"
	FNAME "Draft to top edge"
END_FUNCTION

FUNCTION CPP "sld_newDraftFace_3"
	CALL_FUNC "sld_newDraftFace"
	PARAM 3
	SPNG 5717
	LPNG 5718
	TIP 33532
	FCAT  "Solids"
	FNAME "Draft to extrude"
END_FUNCTION

FUNCTION CPP "sld_newTrimToPlane"
    SPNG 5719
   	LPNG 5720
    TIP 33473
	FCAT  "Solids"
	FNAME "Trim To Plane"
END_FUNCTION

FUNCTION CPP "sld_newTrimToSurfSheet"
	SPNG 5721
	LPNG 5722
	TIP 32985
	FCAT  "Solids"
	FNAME "Trim To Surface/Sheet"
END_FUNCTION

FUNCTION CPP "do_solid_layout"
	SPNG 5799
	LPNG 5800
	TIP 32986
	FCAT  "Solids"
	FNAME "Layout"
END_FUNCTION

FUNCTION CPP "sld_do_feature_detect"
	SPNG 5801
	LPNG 5802
	TIP 32987
	FCAT  "Solids"
	FNAME "Add History"
END_FUNCTION

FUNCTION CPP "sld_do_hole_axis"
	SPNG 5725
	LPNG 5726
	TIP 33513
	FCAT  "Solids"
	FNAME "Hole Axis"
END_FUNCTION

FUNCTION CPP "SldDoHole"
	SPNG 8688
	LPNG 8689
	TIP 33514
	FCAT  "Solids"
	FNAME "Hole"
END_FUNCTION

FUNCTION CPP "SldFindHoles"
	SPNG 107
	LPNG 110
	TIP 106
	FCAT  "Solids"
	FNAME "Find Holes"
END_FUNCTION

FUNCTION CPP "sld_do_solid_disassemble"
	SPNG 6459
	LPNG 6460
	TIP 33079
	FCAT  "Solids"
	FNAME "Solid Disassemble"
END_FUNCTION

FUNCTION CPP "SldAlignToFace"
	SPNG 6461
	LPNG 6462
	TIP 33080
	FCAT  "Solids"
	FNAME "Solid Align To Face"
END_FUNCTION

FUNCTION CPP "SldAlignToPlane"
	SPNG 6470
	LPNG 6471
	TIP 33110
	FCAT  "Solids"
	FNAME "Solid Align To Plane"
END_FUNCTION

FUNCTION CPP "SldSolidPosition"
	SPNG 6478
	LPNG 6479
	TIP 33111
	FCAT  "Solids"
	FNAME "Solid Position"
END_FUNCTION

FUNCTION CPP "sld_do_stitching"
	SPNG 5803
	LPNG 5804
	TIP 33032
	FCAT  "Solids"
	FNAME "From Surfaces"
END_FUNCTION

FUNCTION CPP "sld_do_thicken"
	SPNG 5727
	LPNG 4520
	TIP 33033
	FCAT  "Solids"
	FNAME "Thicken"
END_FUNCTION

FUNCTION CPP "sld_do_face_removal"
	SPNG 5729
	LPNG 5730
	TIP 33034
	FCAT  "Solids"
	FNAME "Remove Faces"
END_FUNCTION

FUNCTION CPP "sld_pattern_rect"
	CALL_FUNC "sld_do_pattern"
	PARAM 0
	SPNG 4525
	LPNG 4526
	TIP 1175
	FCAT  "Solids"
	FNAME "Rectangular Pattern"
END_FUNCTION

FUNCTION CPP "sld_pattern_circ"
	CALL_FUNC "sld_do_pattern"
	PARAM 1
	SPNG 4527
	LPNG 4528
	TIP 1177
	FCAT  "Solids"
	FNAME "Circular Pattern"
END_FUNCTION

FUNCTION CPP "sld_pattern_manual"
	CALL_FUNC "sld_do_pattern"
	PARAM 2
	SPNG 4529
	LPNG 4530
	TIP 1178
	FCAT  "Solids"
	FNAME "Manual Pattern"
END_FUNCTION

FUNCTION CPP "sld_changeFaceColor"
	CALL_FUNC "SldChangeFaceColor"
	SPNG 4531
	LPNG 4532
	TIP 1159
	FCAT  "Solids"
	FNAME "Change Solid Face Color"
END_FUNCTION

FUNCTION CPP "sld_setOpColor"
	CALL_FUNC "sld_pick_and_set_operation_color"
	SPNG 4535
	LPNG 4536
	TIP 1164
	FCAT  "Solids"
	FNAME "Set Solid Feature Color"
END_FUNCTION

FUNCTION CPP "sld_clearOpColor"
	CALL_FUNC "sld_pick_and_clear_operation_color"
	SPNG 4537
	LPNG 4538
	TIP 1166
	FCAT  "Solids"
	FNAME "Clear Solid Feature Color"
END_FUNCTION

FUNCTION CPP "sld_clearAllColor"
	CALL_FUNC "sld_pick_and_clear_all_color"
	SPNG 4539
	LPNG 4540
	TIP 1168
	FCAT  "Solids"
	FNAME "Clear All Solid Face and Feature Colors"
END_FUNCTION

FUNCTION CPP "sld_remove_history_task"
	SPNG 4541
	LPNG 4542
	TIP 1180
	FCAT  "Solids"
	FNAME "Remove All Solid History Operations"
END_FUNCTION

FUNCTION CPP "sld_modify_blend"
	SPNG 5749
	LPNG 5750
	TIP 1181
	FCAT  "Solids"
	FNAME "Modify Solid Fillets"
END_FUNCTION

FUNCTION CPP "sld_remove_blend"
	SPNG 4549
	LPNG 5752
	TIP 1183
	FCAT  "Solids"
	FNAME "Remove Solid Fillets"
END_FUNCTION

FUNCTION CPP "sld_modify_feature"
	SPNG 4545
	LPNG 4546
	TIP 1623
	FCAT  "Solids"
	FNAME "Modify Solid Feature"
END_FUNCTION

FUNCTION CPP "SldImpression"
	SPNG 6475
	LPNG 6476
	TIP 27672
	FCAT  "Solids"
	FNAME "Create Solid Impression"
END_FUNCTION

FUNCTION CPP "sld_simplify"
	SPNG 4551
	LPNG 4552
	TIP 1184
	FCAT  "Solids"
	FNAME "Simplify Solid Body"
END_FUNCTION

FUNCTION CPP "SldOptimize"
	SPNG 4553
	LPNG 4554
	TIP 1214
	FCAT  "Solids"
	FNAME "Optimize Solid Body"
END_FUNCTION

FUNCTION CPP "SldRepairSmallFaces"
	SPNG 6487
	LPNG 6488
	TIP 1217
	FCAT  "Solids"
	FNAME "Repair Small Faces"
END_FUNCTION

FUNCTION CPP "sldPushPullMove"
	SPNG 5757
	LPNG 5758
	TIP 1186
	FCAT  "Solids"
	FNAME "Move Solid Faces"
END_FUNCTION

FUNCTION CPP "sldPushPullOffset"
	SPNG 5759
	LPNG 5760
	TIP 1189
	FCAT  "Solids"
	FNAME "Push/Pull Solid Faces"
END_FUNCTION

FUNCTION CPP "sldSplitFace"
	SPNG 6291
	LPNG 6292
	TIP 1187
	FCAT  "Solids"
	FNAME "Split Solid Faces"
END_FUNCTION

FUNCTION CPP "WireframeModifyAtIntersection"
	SPNG 6468
	LPNG 6469
	TIP 33123
	FCAT  "Solids"
	FNAME "Modify At Intersection"
END_FUNCTION

FUNCTION CPP "OnSolidsSelectActivate"
	INLINE
	HIDDEN
	FCAT  "Solids"
	FNAME "Toggle Solid Selection"
END_FUNCTION

FUNCTION CPP "OnSolidsSelectEdge"
	INLINE
	HIDDEN
	NOTASK
	FCAT  "Solids"
	FNAME "Select Edge Filter"
END_FUNCTION

FUNCTION CPP "OnSolidsSelectFace"
	INLINE
	HIDDEN
	NOTASK
	FCAT  "Solids"
	FNAME "Select Face Filter"
END_FUNCTION

FUNCTION CPP "OnSolidsSelectBody"
	INLINE
	HIDDEN
	NOTASK
	FCAT  "Solids"
	FNAME "Select Body Filter"
END_FUNCTION

#FUNCTION CPP "OnSolidsSelectLoop"
#	SBMP  IDB_OnSolidsSelectLoop_16
#	LBMP  IDB_OnSolidsSelectLoop_24
#	UICALLBACK "OnUpdateSolidsSelectLoop"
#	TIP   ID_SOLIDS_SELECT_LOOP
#	INLINE
#	FCAT  "Solids"
#	FNAME ""
#END_FUNCTION

#FUNCTION CPP "OnSolidsSelectPartial"
#	SBMP  IDB_OnSolidsSelectPartial_16
#	LBMP  IDB_OnSolidsSelectPartial_24
#	UICALLBACK "OnUpdateSolidsSelectPartial"
#	TIP   ID_SOLIDS_SELECT_PARTIAL
#	INLINE
#	FCAT  "Solids"
#	FNAME ""
#END_FUNCTION

FUNCTION CPP "OnSolidsSelectReverse"
	HIDDEN
	SPNG 5763
	LPNG 5764
	UICALLBACK "OnUpdateSolidsSelectReverse"
	TIP 33067
	INLINE
	FCAT  "Solids"
	FNAME "Reverse Direction"
END_FUNCTION

FUNCTION CPP "OnSolidsSelectEnd"
	HIDDEN
	SPNG 4567
	LPNG 4568
	UICALLBACK "OnUpdateSolidsSelectEnd"
	TIP 32996
	INLINE
	FCAT  "Solids"
	FNAME "End Selection"
END_FUNCTION

FUNCTION CPP "OnSolidsSelectCancel"
	HIDDEN
	SPNG 4565
	LPNG 4566
	UICALLBACK "OnUpdateSolidsSelectCancel"
	TIP 32997
	INLINE
	FCAT  "Solids"
	FNAME "Cancel Selection"
END_FUNCTION

FUNC_DLL "MCCAD.DLL"
RES_DLL  "MCCADRES.DLL"

FUNCTION CPP "sld_convert_to_surfs"
	SPNG 5723
	LPNG 5724
	TIP 1158
	FCAT  "Solids"
	FNAME "Surfaces from Solids"
END_FUNCTION

# SURFACES ////////////////////////////////////////////////////////////////

FUNC_DLL "MCCAD.DLL"
RES_DLL  "MCCADRES.DLL"
CATEGORY 3358

FUNCTION CPP "ExtrudeSurface"
	SPNG 6180
	LPNG 6181
	TIP 33195
	FCAT  "Surfaces"
	FNAME "Extruded"
END_FUNCTION

FUNCTION CPP "ExtendTrimmedEdge"
	SPNG 4856
	LPNG 4857
	TIP 33138
	FCAT  "Surfaces"
	FNAME "Extend Trimmed Edges"
END_FUNCTION

FUNCTION CPP "FenceSurfCreation"
	SPNG 4842
	LPNG 4843
	TIP 33136
	FCAT  "Surfaces"
	FNAME "Fence"
END_FUNCTION

FUNCTION CPP "NetSurfCreation"
	SPNG 4846
	LPNG 4847
	TIP 33134
	FCAT  "Surfaces"
	FNAME "Net Surface"
END_FUNCTION

FUNCTION CPP "RuledLoftedSurfaces"
	SPNG 4852
	LPNG 4853
	TIP 33149
	FCAT  "Surfaces"
	FNAME "Ruled/Lofted"
END_FUNCTION

FUNCTION CPP "RevolvedSurfaces"
	SPNG 4850
	LPNG 4851
	TIP 33150
	FCAT  "Surfaces"
	FNAME "Revolved"
END_FUNCTION

FUNCTION CPP "OffsetSurfaces"
	SPNG 4848
	LPNG 4849
	TIP 33162
	FCAT  "Surfaces"
	FNAME "Offset"
END_FUNCTION

FUNCTION CPP "SweptSurfaces"
	SPNG 4854
	LPNG 4855
	TIP 33163
	FCAT  "Surfaces"
	FNAME "Swept"
END_FUNCTION

FUNCTION CPP "FlatBoundarySurfaces"
	SPNG 5531
	LPNG 5532
	TIP 33164
	FCAT  "Surfaces"
	FNAME "Flat Boundary"
END_FUNCTION

FUNCTION CPP "UnTrimSurfaces"
	SPNG 4858
	LPNG 4859
	TIP 33186
	FCAT  "Surfaces"
	FNAME "Un-Trim"
END_FUNCTION

FUNCTION CPP "SurfaceExtend"
	SPNG 6196
	LPNG 6197
	TIP 33400
	FCAT  "Surfaces"
	FNAME "Extend"
END_FUNCTION

FUNCTION CPP "RemoveBoundary"
	SPNG 6172
	LPNG 6173
	TIP 33188
	FCAT  "Surfaces"
	FNAME "Remove Boundary"
END_FUNCTION

FUNCTION CPP "FillHoles"
	SPNG 6174
	LPNG 6175
	TIP 33189
	FCAT  "Surfaces"
	FNAME "Fill Holes"
END_FUNCTION

FUNCTION CPP "SplitSurface"
	SPNG 6176
	LPNG 6177
	TIP 33193
	FCAT  "Surfaces"
	FNAME "Split"
END_FUNCTION

FUNCTION CPP "trim_surface_1"
	SPNG 6182
	LPNG 6183
	TIP 33200
	FCAT  "Surfaces"
	FNAME "Trim to Surfaces"
END_FUNCTION

FUNCTION CPP "trim_surface_2"
	SPNG 6184
	LPNG 6185
	TIP 33201
	FCAT  "Surfaces"
	FNAME "Trim to Curves"
END_FUNCTION

FUNCTION CPP "trim_surface_3"
	SPNG 6186
	LPNG 6187
	TIP 33203
	FCAT  "Surfaces"
	FNAME "Trim to Plane"
END_FUNCTION

FUNCTION CPP "SurfaceFilletToSurface"
	SPNG 6188
	LPNG 6189
	TIP 33207
	FCAT  "Surfaces"
	FNAME "Fillet to Surfaces"
END_FUNCTION

FUNCTION CPP "SurfaceFilletToCurve"
	SPNG 6190
	LPNG 6191
	TIP 33208
	FCAT  "Surfaces"
	FNAME "Fillet to Curves"
END_FUNCTION

FUNCTION CPP "SurfaceFilletToPlane"
	SPNG 6192
	LPNG 6193
	TIP 33209
	FCAT  "Surfaces"
	FNAME "Fillet to Plane"
END_FUNCTION

FUNCTION CPP "DraftSurface"
	SPNG 6178
	LPNG 6179
	TIP 33194
	FCAT  "Surfaces"
	FNAME "Draft"
END_FUNCTION

FUNCTION CPP "blend_2_surfs"
	SPNG 6194
	LPNG 6195
	TIP 33398
	FCAT  "Surfaces"
	FNAME "Two Surface Blend"
END_FUNCTION

FUNCTION CPP "blend_3_surfs"
	SPNG 6198
	LPNG 6199
	TIP 33399
	FCAT  "Surfaces"
	FNAME "Three Surface Blend"
END_FUNCTION

FUNCTION CPP "EditSurface"
	SPNG 1201
	LPNG 1028
	TIP 3621
	FCAT  "Surfaces"
	FNAME "Edit Surface"
END_FUNCTION

FUNCTION CPP "ReflowSurfaceUV"
	SPNG 1030
	LPNG 1029
	TIP 126
	FCAT  "Surfaces"
	FNAME "Reflow UV"
END_FUNCTION

FUNCTION CPP "EditSurfaceUV"
	SPNG 1032
	LPNG 1031
	TIP 136
	FCAT  "Surfaces"
	FNAME "Edit UV"
END_FUNCTION

FUNCTION CPP "OverflowSurfaceUV"
	SPNG 1033
	LPNG 1034
	TIP 148
	FCAT  "Surfaces"
	FNAME "Overflow UV"
END_FUNCTION

FUNCTION CPP "blend_3_fils"
	SPNG 6200
	LPNG 6201
	TIP 33401
	FCAT  "Surfaces"
	FNAME "Three Fillet Blend"
END_FUNCTION

FUNCTION CPP "PowerSurface"
	SPNG 10448
	LPNG 10447
	TIP 33187
	FCAT  "Surfaces"
	FNAME "Power Surface"
END_FUNCTION


# TOOL PLANE MANIPULATION //////////////////////////////////////////////////////

FUNC_DLL "EXE"
RES_DLL "OPMANRES.DLL"
CATEGORY 3359

FUNCTION CPP "OnTPlaneTop"
	SPNG 6202
	LPNG 6203
	TIP 32819
	INLINE
	FCAT  "Tool Plane"
	FNAME "Top Tplane"
END_FUNCTION

FUNCTION CPP "OnTPlaneBottom"
	SPNG 5928
	LPNG 5929
	TIP 33051
	INLINE
	FCAT  "Tool Plane"
	FNAME "Bottom Tplane"
END_FUNCTION

FUNCTION CPP "OnTPlaneFront"
	SPNG 6204
	LPNG 6205
	TIP 32820
	INLINE
	FCAT  "Tool Plane"
	FNAME "Front Tplane"
END_FUNCTION

FUNCTION CPP "OnTPlaneBack"
	SPNG 5930
	LPNG 5931
	TIP 33052
	INLINE
	FCAT  "Tool Plane"
	FNAME "Back Tplane"
END_FUNCTION

FUNCTION CPP "OnTPlaneLeft"
	SPNG 6120
	LPNG 6122
	TIP 33211
	INLINE
	FCAT  "Tool Plane"
	FNAME "Left Tplane"
END_FUNCTION

FUNCTION CPP "OnTPlaneSide"
	SPNG 6206
	LPNG 6207
	TIP 32821
	INLINE
	FCAT  "Tool Plane"
	FNAME "Right Tplane"
END_FUNCTION

FUNCTION CPP "OnTPlaneIso"
	SPNG 6124
	LPNG 6125
	TIP 33212
	INLINE
	FCAT  "Tool Plane"
	FNAME "Isometric Tplane"
END_FUNCTION

FUNCTION CPP "OnTPlaneIsoRev"
	SPNG 6126
	LPNG 6172
	TIP 33213
	INLINE
	FCAT  "Tool Plane"
	FNAME "Isometric Reverse Tplane"
END_FUNCTION

FUNCTION CPP "OnTPlaneTrimetric"
	SPNG 6173
	LPNG 6174
	TIP 33214
	INLINE
	FCAT  "Tool Plane"
	FNAME "Trimetric Tplane"
END_FUNCTION

# VIEW MANIPULATION ///////////////////////////////////////////////////////

FUNC_DLL "EXE"
RES_DLL  "OPMANRES.DLL"
CATEGORY 3360

FUNCTION CPP "OnScreenFit"
	SPNG 4928
	LPNG 4929
	TIP 32826
	INLINE
	NOTASK
	FCAT  "View"
	FNAME "Fit"
END_FUNCTION

FUNCTION CPP "OnScreenPan"
	SPNG 4932
	LPNG 4933
	TIP 32891
	INLINE
	FCAT  "View"
	FNAME "Pan"
END_FUNCTION

FUNCTION CPP "OnScreenUnzoom"
	SPNG 4940
	LPNG 4941
	TIP 32825
	INLINE
	FCAT  "View"
	FNAME "Un-Zoom .8"
END_FUNCTION

FUNCTION CPP "OnScreenUnzoomPrevious"
	SPNG 5543
	LPNG 5544
	TIP 32839
	INLINE
	FCAT  "View"
	FNAME "Un-Zoom Previous"
END_FUNCTION

FUNCTION CPP "OnScreenZoomTarget"
	SPNG 4952
	LPNG 4953
	TIP 33139
	INLINE
	FCAT  "View"
	FNAME "Zoom Target"
END_FUNCTION

FUNCTION CPP "OnScreenZoom"
	SPNG 4954
	LPNG 4955
	TIP 33140
	INLINE
	FCAT  "View"
	FNAME "Zoom Window"
END_FUNCTION

FUNCTION CPP "OnScreenZoomSelected"
	SPNG 4950
	LPNG 4951
	TIP 33141
	INLINE
	FCAT  "View"
	FNAME "Zoom Selected"
END_FUNCTION

FUNCTION CPP "OnViewDynamicRotation"
	SPNG 4926
	LPNG 4927
	TIP 33143
	INLINE
	FCAT  "Plane Manipulation"
	FNAME "Dynamic Rotation"
END_FUNCTION

FUNCTION CPP "OnViewPreviousView"
	SPNG 4936
	LPNG 4937
	TIP 33144
	INLINE
	FCAT  "Plane Manipulation"
	FNAME "Previous View"
END_FUNCTION

FUNCTION CPP "OnViewNormal"
	SPNG 4930
	LPNG 4931
	TIP 33145
	INLINE
	FCAT  "Plane Manipulation"
	FNAME "View From Line Normal"
END_FUNCTION

FUNCTION CPP "OnGviewGeometrySelect"
	SPNG 4938
	LPNG 4939
	TIP 33607
	INLINE
	FCAT  "Plane Manipulation"
	FNAME "Set View Associated with Geometry"
END_FUNCTION

FUNCTION CPP "OnViewEntity"
	SPNG 4944
	LPNG 4945
	TIP 33147
	INLINE
	FCAT  "Plane Manipulation"
	FNAME "View From Entity"
END_FUNCTION

FUNCTION CPP "OnViewSolidface"
	SPNG 4946
	LPNG 4947
	TIP 33148
	INLINE
	FCAT  "Plane Manipulation"
	FNAME "View From Solid Face"
END_FUNCTION

FUNCTION CPP "OnViewFlipXForY"
	SPNG 4970
	LPNG 4971
	TIP 33160
	INLINE
	FCAT  "Plane Manipulation"
	FNAME "Flip View X for Y"
END_FUNCTION

FUNCTION CPP "OnViewFlipXForZ"
	SPNG 4972
	LPNG 4973
	TIP 33159
	INLINE
	FCAT  "Plane Manipulation"
	FNAME "Flip View X for Z"
END_FUNCTION

FUNCTION CPP "OnViewFlipYForZ"
	SPNG 4974
	LPNG 4975
	TIP 33161
	INLINE
	FCAT  "Plane Manipulation"
	FNAME "Flip View Y for Z"
END_FUNCTION

FUNCTION CPP "OnViewTop"
	SPNG 6012
	LPNG 6013
	TIP 33152
	INLINE
	FCAT  "View"
	FNAME "Top (WCS)"
END_FUNCTION

FUNCTION CPP "OnViewLeft"
	SPNG 6014
	LPNG 6015
	TIP 33154
	INLINE
	FCAT  "View"
	FNAME "Left (WCS)"
END_FUNCTION

FUNCTION CPP "OnViewBack"
	SPNG 6016
	LPNG 6017
	TIP 33151
	INLINE
	FCAT  "View"
	FNAME "Back (WCS)"
END_FUNCTION

FUNCTION CPP "OnViewFront"
	SPNG 6018
	LPNG 6019
	TIP 33153
	INLINE
	FCAT  "View"
	FNAME "Front (WCS)"
END_FUNCTION

FUNCTION CPP "OnViewRight"
	SPNG 6020
	LPNG 6021
	TIP 33155
	INLINE
	FCAT  "View"
	FNAME "Right (WCS)"
END_FUNCTION

FUNCTION CPP "OnViewBottom"
	SPNG 6022
	LPNG 6023
	TIP 33156
	INLINE
	FCAT  "View"
	FNAME "Bottom (WCS)"
END_FUNCTION

FUNCTION CPP "OnViewIsometric"
	SPNG 6024
	LPNG 6025
	TIP 33157
	INLINE
	FCAT  "View"
	FNAME "Isometric (WCS)"
END_FUNCTION

FUNCTION CPP "OnViewIsoRev"
	SPNG 6189
	LPNG 6190
	TIP 33215
	INLINE
	FCAT  "View"
	FNAME "Isometric Reverse (WCS)"
END_FUNCTION

FUNCTION CPP "OnViewTrimetric"
	SPNG 6191
	LPNG 6192
	TIP 33216
	INLINE
	FCAT  "View"
	FNAME "Trimetric (WCS)"
END_FUNCTION

FUNCTION CPP "OnViewRotate"
	SPNG 6026
	LPNG 6027
	TIP 33062
	INLINE
	FCAT  "View"
	FNAME "Rotate Gview"
END_FUNCTION

FUNCTION CPP "OnViewEqualsCPlane"
	SPNG 6028
	LPNG 6029
	TIP 32811
	INLINE
	FCAT  "View"
	FNAME "Gview = Cplane"
END_FUNCTION

FUNCTION CPP "OnViewEqualsTPlane"
	SPNG 6030
	LPNG 6031
	TIP 32812
	INLINE
	FCAT  "View"
	FNAME "Gview = Tplane"
END_FUNCTION

FUNCTION CPP "OnGViewSave"
	SPNG 6032
	LPNG 6033
	UICALLBACK "OnUpdateGViewSave"
	TIP 33183
	INLINE
	FCAT  "View"
	FNAME "Save Graphics View"
END_FUNCTION

FUNCTION CPP "OnToggleSectionViewDisplay"
	SPNG 8693
	LPNG 8694
	UICALLBACK "OnUpdateSectionViewDisplay"
	TIP 424
	INLINE
	FCAT  "View"
	FNAME "Section View Toggle"
END_FUNCTION

FUNCTION CPP "OnToggleSectionViewDisplayCaps"
	HIDDEN
	UICALLBACK "OnUpdateSectionViewDisplayCaps"
	TIP 443
	INLINE
	FCAT  "View"
	FNAME "Show Caps"
END_FUNCTION

FUNCTION CPP "OnToggleSectionViewDisplayWireframe"
	HIDDEN
	UICALLBACK "OnUpdateSectionViewDisplayWireframe"
	TIP 372
	INLINE
	FCAT  "View"
	FNAME "Section View Toggle Wires"
END_FUNCTION

FUNCTION CPP "OnToggleSectionViewDisplayShaded"
	HIDDEN
	UICALLBACK "OnUpdateSectionViewDisplayShaded"
	TIP 426
	INLINE
	FCAT  "View"
	FNAME "Section View Toggle Shaded"
END_FUNCTION

FUNCTION CPP "OnToggleSectionViewDisplayStockModel"
	HIDDEN
	UICALLBACK "OnUpdateSectionViewDisplayStockModel"
	TIP 425
	INLINE
	FCAT  "View"
	FNAME "Section View Toggle Stock Model"
END_FUNCTION

FUNCTION CPP "OnToggleSectionViewDisplayStockPrimitive"
	HIDDEN
	UICALLBACK "OnUpdateSectionViewDisplayStockPrimitive"
	TIP 427
	INLINE
	FCAT  "View"
	FNAME "Section View Toggle Stock Primitive"
END_FUNCTION

FUNCTION CPP "OnToggleSectionViewDisplayToolpath"
	HIDDEN
	UICALLBACK "OnUpdateSectionViewDisplayToolpath"
	TIP 364
	INLINE
	FCAT  "View"
	FNAME "Section View Toggle Toolpath"
END_FUNCTION

FUNCTION CPP "SbSelectRotationPosition"
	SPNG 6034
	LPNG 6035
	TIP 3316
	INLINE
	FCAT  "Settings"
	FNAME "Select Motion Controller Rotation Position"
END_FUNCTION

# WCS MANIPULATION ////////////////////////////////////////////////////////

FUNC_DLL "EXE"
RES_DLL "OPMANRES.DLL"
CATEGORY 3361

FUNCTION CPP "OnWCSTop"
	SPNG 26033
	LPNG 26032
	TIP 33165
	INLINE
	FCAT  "WCS"
	FNAME "Top WCS"
END_FUNCTION

FUNCTION CPP "OnWCSFront"
	SPNG 26034
	LPNG 26035
	TIP 33166
	INLINE
	FCAT  "WCS"
	FNAME "Front WCS"
END_FUNCTION

FUNCTION CPP "OnWCSBack"
	SPNG 26036
	LPNG 26037
	TIP 33167
	INLINE
	FCAT  "WCS"
	FNAME "Back WCS"
END_FUNCTION

FUNCTION CPP "OnWCSBottom"
	SPNG 26038
	LPNG 26039
	TIP 33168
	INLINE
	FCAT  "WCS"
	FNAME "Bottom WCS"
END_FUNCTION

FUNCTION CPP "OnWCSRight"
	SPNG 26040
	LPNG 26041
	TIP 33169
	INLINE
	FCAT  "WCS"
	FNAME "Right WCS"
END_FUNCTION

FUNCTION CPP "OnWCSLeft"
	SPNG 26042
	LPNG 26043
	TIP 33170
	INLINE
	FCAT  "WCS"
	FNAME "Left WCS"
END_FUNCTION

FUNCTION CPP "OnWCSIsometric"
	SPNG 6243
	LPNG 6244
	TIP 33172
	INLINE
	FCAT  "WCS"
	FNAME "Isometric WCS"
END_FUNCTION

FUNCTION CPP "OnWCSIsoRev"
	SPNG 6185
	LPNG 6186
	TIP 6175
	INLINE
	FCAT  "WCS"
	FNAME "Isometric Reverse WCS"
END_FUNCTION

FUNCTION CPP "OnWCSTrimetric"
	SPNG 6187
	LPNG 6188
	TIP 6176
	INLINE
	FCAT  "WCS"
	FNAME "Trimetric WCS"
END_FUNCTION

FUNCTION CPP "OnWCSEqualsCPlane"
	SPNG 6259
	LPNG 6260
	TIP 33178
	INLINE
	FCAT  "WCS"
	FNAME "WCS = Cplane"
END_FUNCTION

FUNCTION CPP "OnWCSEqualsTPlane"
	SPNG 6261
	LPNG 6262
	TIP 33179
	INLINE
	FCAT  "WCS"
	FNAME "WCS = Tplane"
END_FUNCTION

# WIREFRAME TOOLPATHS /////////////////////////////////////////////////////

FUNC_DLL "MCMILL.DLL"
RES_DLL  "OPMANRES.DLL"
CATEGORY 3362

FUNCTION CPP "ruled_toolbar"
	SPNG 6271
	LPNG 6272
	TIP 33099
	FCAT  "Wireframe Toolpaths"
	FNAME "Ruled"
END_FUNCTION

FUNCTION CPP "loft_toolbar"
	SPNG 6273
	LPNG 6274
	TIP 33104
	FCAT  "Wireframe Toolpaths"
	FNAME "Lofted"
END_FUNCTION

FUNCTION CPP "coons_toolbar"
	SPNG 6275
	LPNG 6276
	TIP 33103
	FCAT  "Wireframe Toolpaths"
	FNAME "Coons"
END_FUNCTION

FUNCTION CPP "swept2D_toolbar"
	SPNG 6277
	LPNG 6278
	TIP 33102
	FCAT  "Wireframe Toolpaths"
	FNAME "Swept 2D"
END_FUNCTION

FUNCTION CPP "swept3D_toolbar"
	SPNG 6279
	LPNG 6280
	TIP 33101
	FCAT  "Wireframe Toolpaths"
	FNAME "Swept 3D"
END_FUNCTION

FUNCTION CPP "revolved_toolbar"
	SPNG 6281
	LPNG 6282
	TIP 33100
	FCAT  "Wireframe Toolpaths"
	FNAME "Revolved"
END_FUNCTION



# XFORM ///////////////////////////////////////////////////////////////////

FUNC_DLL "MCCADUTIL.DLL"
RES_DLL  "MCCADUtilRes.DLL"
CATEGORY 3363

FUNCTION CPP "do_xform_trans"
	SPNG 4820
	LPNG 4821
	TIP 32943
	FCAT  "Transform"
	FNAME "Translate"
END_FUNCTION

FUNCTION CPP "do_xform_stretch"
	SPNG 4816
	LPNG 4817
	TIP 33280
	FCAT  "Transform"
	FNAME "Stretch"
END_FUNCTION

FUNCTION CPP "do_xform_trans3d"
	SPNG 4818
	LPNG 4819
	TIP 32944
	FCAT  "Transform"
	FNAME "Translate 3D"
END_FUNCTION

FUNCTION CPP "do_xform_mirror"
	SPNG 4810
	LPNG 4811
	TIP 32945
	FCAT  "Transform"
	FNAME "Mirror"
END_FUNCTION

FUNCTION CPP "do_xform_rotate"
	SPNG 4812
	LPNG 4813
	TIP 32946
	FCAT  "Transform"
	FNAME "Rotate"
END_FUNCTION

FUNCTION CPP "do_xform_scale"
	SPNG 4814
	LPNG 4815
	TIP 32947
	FCAT  "Transform"
	FNAME "Scale"
END_FUNCTION

FUNCTION CPP "do_xform_offset"
	SPNG 4822
	LPNG 4823
	TIP 32948
	FCAT  "Transform"
	FNAME "Offset"
END_FUNCTION

FUNCTION CPP "do_xform_offset_ctour"
	SPNG 4824
	LPNG 4825
	TIP 32949
	FCAT  "Transform"
	FNAME "Offset Contour"
END_FUNCTION

FUNCTION CPP "do_xform_project"
	SPNG 4826
	LPNG 4827
	TIP 32950
	FCAT  "Transform"
	FNAME "Project"
END_FUNCTION

FUNCTION CPP "do_xform_array"
	SPNG 4828
	LPNG 4829
	TIP 32951
	FCAT  "Transform"
	FNAME "Rectangular Array"
END_FUNCTION

FUNCTION CPP "do_xform_roll"
	SPNG 4830
	LPNG 4831
	TIP 32958
	FCAT  "Transform"
	FNAME "Roll"
END_FUNCTION

FUNCTION CPP "do_xform_movetoorigin"
	SPNG 4838
	LPNG 4839
	TIP 32961
	FCAT  "Transform"
	FNAME "Move to Origin"
END_FUNCTION

FUNCTION CPP "TransformDistribute"
	SPNG 4836
	LPNG 4837
	TIP 33475
	FCAT  "Transform"
	FNAME "Distribute"
END_FUNCTION

FUNCTION CPP "DynamicXform"
	SPNG 10462
	LPNG 10463
	TIP 422
	FCAT  "Transform"
	FNAME "Dynamic Transform"
END_FUNCTION

FUNC_DLL "EXE"
RES_DLL  "OPMANRES.DLL"

FUNCTION CPP "OnScreenCombineViews"
	SPNG 6094
	LPNG 6095
	TIP 33114
	INLINE
	FCAT  "Screen"
	FNAME "Combine Views"
END_FUNCTION


# WIRE TOOLPATHS //////////////////////////////////////////////////////////

FUNC_DLL "MCWIRE.DLL"
RES_DLL  "MCWIRERES.DLL"
CATEGORY 107

FUNCTION CPP "wctour_assoc"
	SPNG 2293
	LPNG 2294
	TIP 32771
	FCAT  "Wirepath"
	FNAME "Contour"
END_FUNCTION

FUNCTION CPP "wdrill_assoc"
	FUNC_DLL  "MCMILL.DLL"
	CALL_FUNC "drill_assoc"
	PARAM 2
	SPNG 2289
	LPNG 2290
	TIP 32773
	FCAT  "Wirepath"
	FNAME "Canned"
END_FUNCTION

FUNCTION CPP "wruled_assoc"
	SPNG 2287
	LPNG 2288
	TIP 32776
	FCAT  "Wirepath"
	FNAME "4 Axis"
END_FUNCTION

FUNCTION CPP "nocore_assoc"
	SPNG 2295
	LPNG 2296
	TIP 32777
	FCAT  "Wirepath"
	FNAME "No Core"
END_FUNCTION

FUNCTION CPP "misc_wncpoint"
	SPNG 2297
	LPNG 2298
	TIP 32769
	FCAT  "Wirepath"
	FNAME "Point"
END_FUNCTION

FUNCTION CPP "wcollar_assoc"
	SPNG 2291
	LPNG 2292
	TIP 32780
	FCAT  "Wirepath"
	FNAME "Collar"
END_FUNCTION

# BACKPLOT ////////////////////////////////////////////////////////////////

FUNC_DLL "EXE"
RES_DLL  "OPMANRES.DLL"
CATEGORY "Hidden"

FUNCTION CPP "backplot"
	HIDDEN
	FCAT  "Hidden"
	FNAME ""
END_FUNCTION

# Machine Type  ///////////////////////////////////////////////////////////

FUNC_DLL "EXE"
RES_DLL  "OPMANRES.DLL"
CATEGORY "Hidden"

FUNCTION CPP "MTCommand"
	HIDDEN
	FCAT  "Hidden"
	FNAME ""
END_FUNCTION

FUNCTION CPP "MTDesign"
	HIDDEN
	FCAT  "Hidden"
	FNAME ""
END_FUNCTION

FUNCTION CPP "OnOpenMruFile"
	HIDDEN
	FCAT  "Hidden"
	FNAME ""
END_FUNCTION

FUNCTION CPP "EditTool"
	HIDDEN
	FCAT  "Hidden"
	FNAME ""
END_FUNCTION

FUNCTION CPP "EditGeometry"
	HIDDEN
	FCAT  "Hidden"
	FNAME ""
END_FUNCTION

FUNCTION CPP "PopupIcon"
	HIDDEN
	SPNG 6541
	LPNG 6542
	FCAT  "Hidden"
	FNAME ""
END_FUNCTION

# TOOL MANAGER ///////////////////////////////////////////////////////

FUNC_DLL "MCTOOL.DLL"
RES_DLL  "MCTOOLRES.DLL"

FUNCTION CPP "RunHolderDesigner"
	HIDDEN
	FCAT  "Tool Manager"
	FNAME "Holder Designer"
END_FUNCTION

FUNCTION CPP "RunInsertDesigner"
	HIDDEN
	FCAT  "Tool Manager"
	FNAME "Insert Designer"
END_FUNCTION

# TOOLPATHS MANAGER ///////////////////////////////////////////////////////

FUNC_DLL "EXE"
RES_DLL  "OPMANRES.DLL"
CATEGORY 3375

FUNCTION CPP "OMselectAllOperations"
	SPNG 6673
	LPNG 6674
	TIP 33333
	INLINE
	FCAT  "Toolpaths Manager"
	FNAME "Select all operations"
END_FUNCTION

FUNCTION CPP "OMselectDirtyOperations"
	SPNG 6675
	LPNG 6676
	TIP 33334
	INLINE
	FCAT  "Toolpaths Manager"
	FNAME "Select all dirty operations"
END_FUNCTION

FUNCTION CPP "OMregenSelectedOperations"
	SPNG 6677
	LPNG 6678
	TIP 33335
	FCAT  "Toolpaths Manager"
	FNAME "Regenerate all selected operations"
END_FUNCTION

FUNCTION CPP "OMregenDirtyOperations"
	SPNG 6679
	LPNG 6680
	TIP 33336
	FCAT  "Toolpaths Manager"
	FNAME "Regenerate all dirty operations"
END_FUNCTION

FUNCTION CPP "OMUseDependents"
	SPNG 8702
	LPNG 8703
	UICALLBACK "OnUpdateOMUseDependents"
	TIP 850
	INLINE
	FCAT "Toolpaths Manager"
	FNAME "Dependent Operations"
END_FUNCTION

FUNCTION CPP "OMSelectDependents"
	HIDDEN
	UICALLBACK "OnUpdateOMSelectDependents"
	TIP 851
	INLINE
	FCAT "Toolpaths Manager"
	FNAME "Select Dependent Operations"
END_FUNCTION

FUNCTION CPP "OMRegenDependents"
	HIDDEN
	UICALLBACK "OnUpdateOMRegenDependents"
	TIP 852
	INLINE
	FCAT "Toolpaths Manager"
	FNAME "Regenerate Dependent Operations"
END_FUNCTION

FUNCTION CPP "OMbackplotSelectedOperations"
	SPNG 6627
	LPNG 6627
	TIP 33337
	FCAT  "Toolpaths Manager"
	FNAME "Backplot Selected Operations"
END_FUNCTION

FUNCTION CPP "OMverifySelectedOperations"
	SPNG 6633
	LPNG 6634
	TIP 33338
	FCAT  "Toolpaths Manager"
	FNAME "Verify Selected Operations"
END_FUNCTION

FUNCTION CPP "OMSimulatateSelectedOperations"
	SPNG 6709
	LPNG 6710
	TIP 33526
	FCAT  "Toolpaths Manager"
	FNAME "Simulate Selected Operations"
END_FUNCTION

FUNCTION CPP "OMUBVSOptions"
	SPNG 6629
	LPNG 6629
	TIP 33521
	FCAT  "Toolpaths Manager"
	FNAME "Simulator Options"
END_FUNCTION

FUNCTION CPP "OMpostSelectedOperations"
	SPNG 6631
	LPNG 6632
	TIP 33339
	FCAT  "Toolpaths Manager"
	FNAME "Post Selected Operations"
END_FUNCTION

FUNCTION CPP "OMhighFeed"
	UICALLBACK "OnUpdateHighFeed"
	SPNG 6681
	LPNG 6682
	TIP 33340
	FCAT  "Toolpaths Manager"
	FNAME "Highfeed"
END_FUNCTION

FUNCTION CPP "OMdeleteAllOperationsAndTools"
	SPNG 6683
	LPNG 6684
	TIP 33350
	FCAT  "Toolpaths Manager"
	FNAME "Delete all operations, groups and tools"
END_FUNCTION

FUNCTION CPP "OMlockSelectedOperations"
	SPNG 6685
	LPNG 6686
	TIP 33341
	INLINE
	FCAT  "Toolpaths Manager"
	FNAME "Toggle locking on selected operations"
END_FUNCTION

FUNCTION CPP "OMtoolpathDisplaySelectedOperations"
	SPNG 6687
	LPNG 6688
	TIP 33342
	INLINE
	FCAT  "Toolpaths Manager"'
	FNAME "Toggle display on selected operations"
END_FUNCTION

FUNCTION CPP "OMpostGhostSelectedOperations"
	SPNG 6689
	LPNG 6690
	TIP 33343
	INLINE
	FCAT  "Toolpaths Manager"
	FNAME "Toggle posting on selected operations"
END_FUNCTION

FUNCTION CPP "OMarrowDown"
	SPNG 6691
	LPNG 6692
	TIP 33344
	INLINE
	FCAT  "Toolpaths Manager"
	FNAME "Move insert arrow down one item"
END_FUNCTION

FUNCTION CPP "OMarrowUp"
	SPNG 6693
	LPNG 6694
	TIP 33345
	INLINE
	FCAT  "Toolpaths Manager"
	FNAME "Move insert arrow up one item"
END_FUNCTION

FUNCTION CPP "OMarrowRight"
	SPNG 6695
	LPNG 6696
	TIP 33346
	INLINE
	FCAT  "Toolpaths Manager"
	FNAME "Position insert arrow after selected operation"
END_FUNCTION

FUNCTION CPP "OMarrowLeft"
	SPNG 6697
	LPNG 6698
	TIP 33347
	INLINE
	FCAT  "Toolpaths Manager"
	FNAME "Scroll window so insert arrow is visible"
END_FUNCTION

FUNCTION CPP "OMdisplayBnci"
	UICALLBACK "OnUpdateDisplayBnci"
	SPNG 6699
	LPNG 6700
	TIP 33348
	INLINE
	FCAT  "Toolpaths Manager"
	FNAME "Only display selected toolpaths"
END_FUNCTION

FUNCTION CPP "OMdisplayGeom"
	UICALLBACK "OnUpdateDisplayGeom"
	SPNG 6701
	LPNG 6702
	TIP 33349
	INLINE
	FCAT  "Toolpaths Manager"
	FNAME "Only display associative geometry"
END_FUNCTION

FUNCTION CPP "OMloadTools"
	ENABLED F
	UICALLBACK "OnUpdateLoadTools"
	SPNG 6705
	LPNG 6706
	TIP 33549
	FCAT  "Toolpaths Manager"
	FNAME "Set up tools on this machine"
END_FUNCTION

FUNCTION CPP "OMeditReferencePositions"
	ENABLED F
	UICALLBACK "OnUpdateEditReferencePositions"
	SPNG 6707
	LPNG 6708
	TIP 33550
	FCAT  "Toolpaths Manager"
	FNAME "Edit reference positions"
END_FUNCTION

FUNCTION CPP "OMimportNCI"
	SPNG 8679
	LPNG 8680
	TIP 3861
	FCAT  "Operations Manager"
	FNAME "Import NCI"
END_FUNCTION

FUNCTION CPP "RunBatch"
	FUNC_DLL "MCMILL.DLL"
	RES_DLL  "OPMANRES.DLL"
	SPNG 8724
	LPNG 8725
	TIP 132
	FCAT  "Operations Manager"
	FNAME "Batch Operations"
END_FUNCTION

FUNCTION CPP "ConfigureAdvancedToolpathDisplay"
	HIDDEN
	TIP 351
	INLINE
	FCAT  "Operations Manager"
	FNAME "Advanced Toolpath Display Settings"
END_FUNCTION

FUNCTION CPP "ConfigureToolsHoldersColors"
	HIDDEN
	TIP 8735
	INLINE
	FCAT  "Screen"
	FNAME "Tools and Holders"
END_FUNCTION

FUNCTION CPP "OnToggleAdvancedToolpathDisplay"
	UICALLBACK "OnUpdateAdvancedToolpathDisplay"
	SPNG 8691
	LPNG 8692
	TIP 419
	INLINE
	FCAT  "Operations Manager"
	FNAME "Advanced Toolpath Display Toggle"
END_FUNCTION

FUNCTION CPP "OnToggleAdvancedToolpathDisplayMidpoints"
	UICALLBACK "OnUpdateAdvancedToolpathDisplayMidpoints"
	HIDDEN
	TIP 418
	INLINE
	FCAT  "Operations Manager"
	FNAME "Midpoints"
END_FUNCTION

FUNCTION CPP "OnToggleAdvancedToolpathDisplayEndpoints"
	UICALLBACK "OnUpdateAdvancedToolpathDisplayEndpoints"
	HIDDEN
	TIP 417
	INLINE
	FCAT  "Operations Manager"
	FNAME "Endpoints"
END_FUNCTION

FUNCTION CPP "OnToggleAdvancedToolpathDisplayVectors"
	UICALLBACK "OnUpdateAdvancedToolpathDisplayVectors"
	HIDDEN
	TIP 416
	INLINE
	FCAT  "Operations Manager"
	FNAME "Vectors"
END_FUNCTION

FUNCTION CPP "OnToggleAdvancedToolpathDisplayDrillCircles"
	UICALLBACK "OnUpdateAdvancedToolpathDisplayDrillCircles"
	HIDDEN
	TIP 529
	INLINE
	FCAT  "Operations Manager"
	FNAME "Drill Tool Diameter"
END_FUNCTION

FUNCTION CPP "OnToggleAdvancedToolpathDisplayRapids"
	UICALLBACK "OnUpdateAdvancedToolpathDisplayRapids"
	HIDDEN
	TIP 154
	INLINE
	FCAT  "Operations Manager"
	FNAME "Rapid Motion"
END_FUNCTION

FUNCTION CPP "OnToggleAdvancedToolpathDisplayCutting"
	UICALLBACK "OnUpdateAdvancedToolpathDisplayCutting"
	HIDDEN
	TIP 110
	INLINE
	FCAT  "Operations Manager"
	FNAME "Cutting Motion"
END_FUNCTION

FUNCTION CPP "OnToggleAdvancedToolpathDisplayRetracts"
	UICALLBACK "OnUpdateAdvancedToolpathDisplayRetracts"
	HIDDEN
	TIP 421
	INLINE
	FCAT  "Operations Manager"
	FNAME "Retract Motion"
END_FUNCTION

FUNCTION CPP "OnToggleAdvancedToolpathDisplayEntries"
	UICALLBACK "OnUpdateAdvancedToolpathDisplayEntries"
	HIDDEN
	TIP 412
	INLINE
	FCAT  "Operations Manager"
	FNAME "Entry Motion"
END_FUNCTION

FUNCTION CPP "OnToggleAdvancedToolpathDisplayExits"
	UICALLBACK "OnUpdateAdvancedToolpathDisplayExits"
	HIDDEN
	TIP 413
	INLINE
	FCAT  "Operations Manager"
	FNAME "Exit Motion"
END_FUNCTION

FUNCTION CPP "OnToggleAdvancedToolpathDisplayMicrolifts"
	UICALLBACK "OnUpdateAdvancedToolpathDisplayMicrolifts"
	HIDDEN
	TIP 422
	INLINE
	FCAT  "Operations Manager"
	FNAME "Microlift Motion"
END_FUNCTION

FUNCTION CPP "OnToggleAdvancedToolpathDisplayTransitions"
	UICALLBACK "OnUpdateAdvancedToolpathDisplayTransitions"
	HIDDEN
	TIP 414
	INLINE
	FCAT  "Operations Manager"
	FNAME "Transition Motion"
END_FUNCTION

FUNCTION CPP "OnToggleAdvancedToolpathDisplayDirty"
	UICALLBACK "OnUpdateAdvancedToolpathDisplayDirty"
	HIDDEN
	TIP 547
	INLINE
	FCAT  "Operations Manager"
	FNAME "Dirty Toolpath Motion"
END_FUNCTION

FUNCTION CPP "OnToggleAdvancedToolpathDisplayContactPoint"
	UICALLBACK "OnUpdateAdvancedToolpathDisplayContactPoint"
	HIDDEN
	TIP 276
	INLINE
	FCAT  "Operations Manager"
	FNAME "Tool Contact Point"
END_FUNCTION


# OPMANAGER ///////////////////////////////////////////////////////////////
FUNC_DLL "MCCORE.DLL"
RES_DLL  "MCCORERES.DLL"
CATEGORY "Hidden"

FUNCTION CPP "highfeed"
	HIDDEN
	FCAT  "Hidden"
	FNAME ""
END_FUNCTION

FUNCTION CPP "EditOperation"
	HIDDEN
	FCAT  "Hidden"
	FNAME "Edit Operation"
END_FUNCTION

FUNCTION CPP "EditLatheOperation"
	HIDDEN
	FCAT  "Hidden"
	FNAME "Edit Lathe Operation"
END_FUNCTION

FUNCTION CPP "EditOperationDefaults"
	CALL_FUNC "EditOperation"
	HIDDEN
	INLINE
	FCAT  "Hidden"
	FNAME "Edit Operation Defaults"
END_FUNCTION

FUNCTION CPP "EditLatheOperationDefaults"
	CALL_FUNC "EditLatheOperation"
	HIDDEN
	INLINE
	FCAT  "Hidden"
	FNAME "Edit Lathe Operation Defaults"
END_FUNCTION

FUNCTION CPP "EditOperationCoolant2d"
	CALL_FUNC "EditOperation"
	PARAM 15
	HIDDEN
	FCAT  "Hidden"
	FNAME ""
END_FUNCTION

FUNCTION CPP "EditOperationCoolant3d"
	CALL_FUNC "EditOperation"
	PARAM 13
	HIDDEN
	FCAT  "Hidden"
	FNAME ""
END_FUNCTION

FUNCTION CPP "EditLatheOperationCoolant2d"
	CALL_FUNC "EditLatheOperation"
	PARAM 15
	HIDDEN
	FCAT  "Hidden"
	FNAME ""
END_FUNCTION

FUNCTION CPP "EditLatheOperationCoolant3d"
	CALL_FUNC "EditLatheOperation"
	PARAM 13
	HIDDEN
	FCAT  "Hidden"
	FNAME ""
END_FUNCTION

# OPMANAGER TOOLBAR BUTTONS  /////////////////////////////////////////////////

FUNC_DLL "EXE"
RES_DLL  "OPMANRES.DLL"
CATEGORY "Hidden"

FUNCTION CPP "OMhelp"
	INLINE
	HIDDEN
	FCAT  "Operations Manager"
	FNAME "Help"
END_FUNCTION

FUNCTION CPP "OMOnCut"
	HIDDEN
	FCAT  "Operations Manager"
	FNAME "Cut"
END_FUNCTION

FUNCTION CPP "OMOnPaste"
	HIDDEN
	FCAT  "Operations Manager"
	FNAME "Paste"
END_FUNCTION

FUNCTION CPP "OMOnCopy"
	HIDDEN
	FCAT  "Operations Manager"
	FNAME "Copy"
END_FUNCTION

FUNCTION CPP "OMSelectAll"
	HIDDEN
	FCAT  "Operations Manager"
	FNAME "Select All"
END_FUNCTION

FUNCTION CPP "OMOnDeleteKey"
	HIDDEN
	FCAT  "Operations Manager"
	FNAME "Delete"
END_FUNCTION

FUNCTION CPP "OMOnUnDelete"
	HIDDEN
	FCAT  "Operations Manager"
	FNAME "Un-Delete"
END_FUNCTION

FUNCTION CPP "OMOnEKey"
	HIDDEN
	FCAT  "Operations Manager"
	FNAME ""
END_FUNCTION

FUNCTION CPP "OMOnTKey"
	HIDDEN
	FCAT  "Operations Manager"
	FNAME ""
END_FUNCTION

FUNCTION CPP "OMOnPKey"
	HIDDEN
	FCAT  "Operations Manager"
	FNAME ""
END_FUNCTION

FUNCTION CPP "OMOnLKey"
	HIDDEN
	FCAT  "Operations Manager"
	FNAME ""
END_FUNCTION

FUNCTION CPP "OMOnAssocDump"
	HIDDEN
	FCAT  "Operations Manager"
	FNAME ""
END_FUNCTION

FUNCTION CPP "OMOnCreateMachineGroup"
	HIDDEN
	FCAT  "Operations Manager"
	FNAME ""
END_FUNCTION

FUNCTION CPP "EditGroupPropertiesDlg"
	HIDDEN
	FCAT  "Hidden"
	FNAME ""
END_FUNCTION

# MCMultiThread - Enable/disable multi-threaded toolpath manager in Mastercam

FUNC_DLL "MCCore.DLL"
RES_DLL  "MCCoreRes.DLL"
CATEGORY 10132

FUNCTION CPP "ToggleMultiThreading"
	UICALLBACK "OnUpdateToggleMultiThreading"
	SPNG 10464
	LPNG 10465
	TIP 10133
	FCAT  "Multi-Thread Toolpath Manager"
	FNAME "Toggle Multi-Threading"
END_FUNCTION

FUNCTION CPP "ToggleMultiThreadDialog"
	UICALLBACK "OnUpdateToggleMultiThreadDialog"
	SPNG 10466
	LPNG 10467
	TIP 10134
	INLINE
	FCAT  "Multi-Thread Toolpath Manager"
	FNAME "Toggle Multi-Threading Manager"
END_FUNCTION

CATEGORY 10624

FUNCTION CPP "DeleteAllSyncInfo"
   SPNG 10468
   LPNG 10469
   TIP 10625
   FCAT  "IOF Utilities"
   FNAME "Delete All Sync Data"
END_FUNCTION

# Graphics Overlay ////////////////////////////////////////////////////////

FUNC_DLL "MCCORE.DLL"
RES_DLL  "MCCORERES.DLL"

FUNCTION CPP "ShowGraphicsOverlay"
	CALL_FUNC "ShowHideGraphicsOverlay"
	PARAM 1
	INLINE
	HIDDEN
	FCAT  "Hidden"
	FNAME "ShowGraphicsOverlay"
END_FUNCTION

FUNCTION CPP "HideGraphicsOverlay"
	CALL_FUNC "ShowHideGraphicsOverlay"
	PARAM 0
	INLINE
	HIDDEN
	FCAT  "Hidden"
	FNAME "HideGraphicsOverlay"
END_FUNCTION