#!/bin/bash

# Apply power
echo 1 > /dev/loadB7

# UART 3 (ttyS1) enable 
devmem2 0x40028044 w 0x10

# start point-to-point protocol daemon #
case $HOSTNAME in
    lrauv-ahi)
        pppd xonxoff asyncmap A0000 /dev/ttyS1 linkname esp noauth local lock 115200 10.89.1.2:10.89.1.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8
        ;;
    lrauv-aku)
        pppd xonxoff asyncmap A0000 /dev/ttyS1 linkname esp noauth local lock 115200 10.89.2.2:10.89.2.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8
        ;;
    lrauv-opah)
        pppd xonxoff asyncmap A0000 /dev/ttyS1 linkname esp noauth local lock 115200 10.89.3.2:10.89.3.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8
        ;;
    *)
        pppd xonxoff asyncmap A0000 /dev/ttyS1 linkname esp noauth local lock 115200 134.89.95.2:134.89.95.12 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 134.89.10.32 ms-dns 134.89.10.10
esac