Index of /internal/projects/machine shop transfer/MCAM 2026/Ray's Backups/Mastercam 2026/help/en/Content/Surfaces

	Name	Last modified	Size	Description
	Parent Directory		-
	Change_Normal.htm	2026-01-05 05:17	23K
	Edit_Surface.htm	2026-01-05 05:15	26K
	Edit_UV.htm	2026-01-05 05:14	23K
	Fill_Holes.htm	2026-01-05 05:15	22K
	Fillet_to_Curves.htm	2026-01-05 05:17	22K
	Fillet_to_Plane.htm	2026-01-05 05:15	22K
	Fillet_to_Surfaces.htm	2026-01-05 05:15	25K
	Flat_Boundary_Surface.htm	2026-01-05 05:15	22K
	Guidelines_for_Creating_Flat_Boundary_Surfaces.htm	2026-01-05 05:15	24K
	Guidelines_for_Filling_Holes_in_a_Trimmed_Surface.htm	2026-01-05 05:14	26K
	Guidelines_for_Removing_a_Trimmed_Boundary_from_a_Surface.htm	2026-01-05 05:15	26K
	Orient_Normals.htm	2026-01-05 05:14	23K
	Overflow_UV.htm	2026-01-05 05:14	29K
	Power_Surface.htm	2026-01-05 05:16	35K
	Primitive_Block.htm	2026-01-05 05:16	26K
	Primitive_Cone.htm	2026-01-05 05:14	23K
	Primitive_Cylinder.htm	2026-01-05 05:15	32K
	Primitive_Sphere.htm	2026-01-05 05:15	23K
	Primitive_Torus.htm	2026-01-05 05:14	23K
	Reflow_UV.htm	2026-01-05 05:15	31K
	Remove_Boundary.htm	2026-01-05 05:15	22K
	Set_Normals.htm	2026-01-05 05:15	22K
	Surface_Draft.htm	2026-01-05 05:16	23K
	Surface_Extend.htm	2026-01-05 05:17	22K
	Surface_Extend_Trimmed_Edges.htm	2026-01-05 05:15	22K
	Surface_Extrude.htm	2026-01-05 05:16	23K
	Surface_Fence.htm	2026-01-05 05:16	22K
	Surface_Net.htm	2026-01-05 05:16	27K
	Surface_Offset.htm	2026-01-05 05:16	22K
	Surface_Revolved.htm	2026-01-05 05:14	22K
	Surface_Split.htm	2026-01-05 05:14	22K
	Surface_Sweep.htm	2026-01-05 05:14	35K
	Surface_Untrim.htm	2026-01-05 05:15	22K
	Surfaced_Ruled_Lofted.htm	2026-01-05 05:14	29K
	Surfaces.htm	2026-01-05 05:15	29K
	SurfacesPics/	2026-05-12 07:26	-
	Surfaces_From_Solids.htm	2026-01-05 05:15	25K
	Three_Fillet_Blend.htm	2026-01-05 05:14	23K
	Three_Surface_Blend.htm	2026-01-05 05:16	23K
	Trim_to_Curves.htm	2026-01-05 05:14	25K
	Trim_to_Plane.htm	2026-01-05 05:15	22K
	Trim_to_Surfaces.htm	2026-01-05 05:15	24K
	Two_Surface_Blend.htm	2026-01-05 05:16	23K