About the Puck Scan Station¶
The Puck Scan Station is ancillary equipment, separate from the FIDO instrument. It's a bench station you use after recovery to read the tag in each puck, print a label for it, and build a data table for the deployment.
The station has its own controller (a RockPi, like the one inside a FIDO), its own puck reader and its own label printer. It runs the same READI-Net software as a FIDO, but it's set up only for reading pucks and printing. It isn't connected to a sampler.
Puck Scan is not part of the FIDO interface
The Puck Scan pages appear only on the Puck Scan Station. They never appear on a FIDO instrument's local interface or in the READI-Net Cloud. Don't try to connect a puck reader or printer to a FIDO. Bring the pucks to the station instead.
What you need¶
- The Puck Scan Station: controller, reader and label printer
- Labels loaded in the printer
- The recovered pucks
- A laptop, tablet or phone with a web browser
- A thumbdrive named FIDO_DATA if you'll export the data that way
Setting up the station¶
Hardware — to be written
Suggested contents:
- The parts of the station and how they connect: controller, reader, label printer, power
- Switching it on, and how long it takes to be ready
- Loading labels in the printer
- Where to place the puck on the reader
- Preparing the FIDO_DATA thumbdrive: the volume label must be
exactly
FIDO_DATA
Connecting to the station¶
To confirm
How a user reaches the station's web page: the station's own WiFi network name, password and address, or another method.
Also: in the current software the station's side menu shows the FIDO instrument pages (Device, Schedule, Management, and so on) above Puck Scan, with no sampler behind them. Either hide them on the station, or tell users here to use only Puck Scan.
Once you're connected, open Puck Scan from the side menu. The screens are described in Puck Scan Screens. The step-by-step procedure is in Recover and Scan Pucks.