Recover and Scan Pucks¶
At the end of a deployment, or when you collect used pucks, follow these steps to bring the samples home with their data.
1. Stop scheduled sampling¶
On the Management page, untick Scheduled Events → Enabled and click Save Changes.
2. Decontaminate (end of deployment)¶
If the FIDO is coming out of the water or won't sample again for a while, click Decontaminate under Sensor Actions and confirm with OK.
3. Remove the pucks¶
Hardware — to be written
How to remove used pucks, how to store and keep them cold, and the chain of custody.
4. Scan the pucks¶
Each puck's tag holds the details the sampler recorded for it: deployment, date, start time, volumes, tube and state. The Puck Scan Station reads the tag, prints a label, and adds a row to the deployment's data table.
The station is separate equipment with its own controller. Take the pucks to it. Don't connect a reader to the FIDO.
- Switch on the Puck Scan Station, connect to it (see Connecting to the station) and open Puck Scan from the side menu.
- Place a puck on the reader. Its details appear under Current Puck.
- Click Save & Print to add it to the dataset and print its label.
- If the puck was already scanned, choose Skip (do nothing), Print Only (reprint the label) or Save & Print (save again).
- If it didn't scan as valid data, nothing is saved. Remove it and try again.
- Repeat for each puck.
5. Save the data¶
When all pucks are scanned:
- Click Download CSV to save the table to your computer, or
- Plug the thumbdrive labeled FIDO_DATA into the station, click Export to Thumbdrive, give the export a Name and click Export.
- When the data is safely saved, click Clear Dataset and then Archive & Clear to start fresh for the next deployment. A copy is kept under Archives.
6. Download the sample record¶
Connect to the FIDO again. On its Samples and Data page, click Read Log to see every sample with its volumes and status. Compare this with the scanned pucks.
7. Close the deployment record¶
In the cloud, set the End Date and Summary on the Deployment and click Export Report for your files.