Skip to content

Software Versions

FIDO runs two pieces of software that must work together:

READI-Net (web application and controller)
Runs on the controller and on the cloud server. Shown at the bottom of the web interface's side menu.
FIDO firmware (esp-sampler)
Runs on the sampler's own microcontroller and moves the hardware.

How version numbers work

Both use version numbers with three parts. In this manual they're written as:

  • READI-Net V1.x.y
  • FIDO firmware V1.a.b

The first number is the compatibility line, and it is the only number that has to match. Any READI-Net V1.x.y works with any FIDO firmware V1.a.b.

The other two numbers (x.y for READI-Net, a.b for the firmware) count fixes and improvements within that line. Each piece is released on its own schedule, so these numbers are unrelated and don't have to match.

READI-Net FIDO firmware Works together?
V1.0.18 V1.0.0 ✅ Yes. Both start with 1.
V1.2.3 V1.7.1 ✅ Yes. Both start with 1. The rest doesn't need to match.
V2.0.0 V1.7.1 ❌ No. 2 and 1 differ.

The first number must match

A READI-Net and a firmware with different first numbers (for example READI-Net V2.0.0 with firmware V1.7.1) are not guaranteed to work together. Don't deploy that combination. Contact your administrator.

Which version does this manual cover?

This manual is written for compatibility line 1: READI-Net V1.x.y with FIDO firmware V1.a.b. The line at the bottom of every page says the same. When a new compatibility line (V2) is released, a new edition of this manual will be published with it.

Updates within line 1 may change wording or add features. When a screen in this manual doesn't quite match yours, you probably have a newer minor release. Check with your administrator before relying on a feature not described here.

Finding the versions on your FIDO

  • READI-Net: bottom of the side menu, on both the local and cloud interfaces.
  • FIDO firmware:

To confirm

Where a user can see the firmware version today, for example in the output of the Check quick command on the Maintenance page. If the web interface doesn't show it yet, consider adding it next to the READI-Net version.