Deploy a FIDO¶
This procedure sets up a FIDO at a new site and gets it ready to sample.
1. Set up the hardware¶
Hardware — to be written
Site selection, mounting, intake placement and depth, plumbing, power connection, and the order to load pucks and supplies. See Hardware.
2. Connect and check the sampler¶
- Power on the FIDO and join its WiFi hotspot. See Connecting to FIDO.
- On the Device page, check that System Status is green.
- If it's red (ERROR) or grey (Unknown), go to When Something Goes Wrong before going on.
3. Restock¶
Tell FIDO what you loaded so it counts the pucks and resets its supply counters. Follow Restock the Sampler.
4. Set the site and deployment details¶
Open the Management page.
- Under Location, enter the site's Latitude, Longitude and a Site Name, then click Save Changes. The map preview shows the point so you can check it.
- Under Device Management:
- Set Device Timezone to the site's local time zone. Schedules and times on every page use this zone.
- Enter a Deployment ID (up to 20 characters). It's saved with every
sample and printed on puck labels, so choose something your lab will
recognize, for example
LKTAHOE-2026-10. - Click Save Changes.
- Under Sample Management, set the Default Volume in liters. This is the volume used by scheduled samples and pre-filled for manual ones. Click Save Changes.
Tip
Save Changes appears next to a section heading only after you've changed something in it. Each section saves separately.
5. Connect to the cloud (optional)¶
If you want to watch this FIDO remotely:
- Under Uplink Internet, check Cell Signal or enter an Uplink WiFi Name and Uplink WiFi Password for a nearby network, then click Save Changes.
- If this FIDO has never been adopted into your organization, use Adopt under Remote Management. See Management.
6. Test¶
Take one sample with Take Sample Now to confirm everything works. See Take a Sample Now.
7. Start the schedule¶
Create the sampling events and turn Scheduled Events on. See Schedule Sampling.
8. Record the deployment¶
In the cloud, create a record under Deployments with the site, dates, people and equipment, and add an activity entry for today's work. See Deployments.